• 제목/요약/키워드: general cargo ship

검색결과 58건 처리시간 0.025초

일반화물선에서 비표준화물(철재상자)의 안전한 운송을 위한 고찰 (A Study on the Safe Transportation of a Non-Standardized Cargo (Steel Box) for General Cargo Ships)

  • 김지홍
    • 한국항해항만학회지
    • /
    • 제43권6호
    • /
    • pp.444-449
    • /
    • 2019
  • 국제항해선박과 국내항해 카페리선박에 적용되었던 "화물적재고박 등에 관한 기준"이 2018년 1월부터 국내 항만을 운송하는 일반화물선박에도 적용 되었다. 이에 따라 일반화물선을 통해 제주도를 기점으로 국내 주요항만으로 운송되고 있던 크기와 형태가 다른 비표준 철재상자와 같은 새로운 형식의 화물에 대한 법적인 성질을 분류하고 그 분류에 따라 안전하게 적재하고 고박할 수 있는 방안이 필요하게 되었다. 본 연구는 현장 조사와 관련기관 자료 수집을 통해 철재상자의 크기, 형태 등을 분석하였고, 이를 기반으로 철재상자의 법적인 지위를 관련 국내법령과 국제규범을 비교 분석하였으며 그 검토결과를 바탕으로 일반화물선의 화물창에 안전하게 적재하고 고박하는 방법을 검토하였다. 철재상자는 관련 국내법령과 국제규범 등에 따르면 비표준화 화물의 한 종류인 보호외벽이 있는 팔렛트 상자로 분류할 수 있었다. 또한, 일반선박의 화물창에 철재상자를 적재하는 경우 선박 화물창에 빈틈이 없도록 꽉채워서 적재하여 운송하는 방안이 검토되었다. 검토된 화물창내 빈틈없이 꽉채우는 적재·운송 방안이 안전한지에 대한 검증은 선체구조 안전성과 선박복원성 확보 여부를 통해 확인하였다. 선체구조 안전성에 대한 검증결과 화물창내에 적재할 수 있는 화물의 총중량에 대한 선박의 화물창 바닥과 양측면의 구조강도 값은 만족하였으며, 선박복원성은 GoM 값과 3가지 횡경사각별 복원정곡선 및 복원정이 만족되었다.

컨테이너선 Bottom Floor 두께 최적화에 대한 연구 (A Study on Thickness Optimization of Bottom Floor for Container Ship)

  • 이아미;유영웅;이준혁;유영규
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2011년도 특별논문집
    • /
    • pp.95-100
    • /
    • 2011
  • In general, thickness of bottom floor in fore/aft cargo hold region for container ship has been determined based on FEM analysis result of mid cargo hold region. But this approach has room for improvement because section shape and frame spacing in fore/aft cargo hold of container ship are quietly different from those of mid cargo hold. From this study, correlation between FEM result and grillage analysis result has been investigated and simple method for thickness determination of bottom floor in fore/aft cargo hold using newly improved grillage analysis is proposed.

  • PDF

JUICE CARRIER 냉동 CARGO HOLD INSULATION 설계에 대한 연구 (A Study of refrigerator cargo hold insulation design for Juice carrier ship)

  • 홍창희;이종태;박태하
    • 대한조선학회 특별논문집
    • /
    • 대한조선학회 2015년도 특별논문집
    • /
    • pp.20-27
    • /
    • 2015
  • The juice carrier is the first ship built in korea. Special refrigerator system and cargo hold insulation with stainless steel tank were equipped on cargo hold. We studied optimum design of cargo hold insulation for reducing of ship building schedule and cost including good quality with refrigerating efficiency. From this study, general and newly specified juice carrier, technical method of cargo hold insulation system, air flow with division air wall, K-value calculation have been investigated.

  • PDF

2016년 요크앤트워프규칙상 구조비의 공동해손 인정요건에 관한 연구 (A Study on the Conditions for Salvage to be allowed as General Average under the YAR 2016)

  • 양정호
    • 무역상무연구
    • /
    • 제77권
    • /
    • pp.169-193
    • /
    • 2018
  • Salvage has been allowed as general average since 1974. However, the adoption of YAR 2004 which had reflects cargo interest's position has made salvage unallowable in general average. The YAR do not have the force of a convention and only apply by mutual agreement between the parties to the contract of carriage. Thus, it is important that any changes to the Rules have the consent of major stakeholder. However, shipowners generally refuged to accept the incorporation of the 2004 Rules. The revised 2016 Rules is the result of compromise between the ship and cargo interests. YAR 2016 Rule VI has the premise that salvage is allowable as general average. However, with regard to the types of salvage that are payable independently by ship and cargo such as under Lloyd's Open Form it does not allow these type of salvages as general average and reapportion them, unless causes significantly inequitable result and meets five conditions. In addition, it makes the adjuster's task much easier as it avoids the deduction in respect of salvage payment can readily be calculated by total amount paid to the salvor. The salvage issue to be dealt with in YAR 2016 reduces the complexity, cost and delay in adjusting general average.

  • PDF

국적일반화물선 초기안전성평가(High-level FSA) 연구(1) (A Study on High-level FSA for Korean-flagged General Cargo Ships)

  • 이종갑;나성;김홍태;김경미
    • 한국항해항만학회지
    • /
    • 제34권3호
    • /
    • pp.213-220
    • /
    • 2010
  • 최근 IMO에서는 산적화물선 및 유조선, 대형여객선에 이어 '일반화물선의 안전(general cargo ships safety)'에 대한 논의의 필요성이 제기(IMO, 2006a)되고 있으며, 본격적인 논의를 위한 준비 작업으로 국제선급협회(IACS)를 통한 공식안전성평가(Formal Safety Assessment, 이하 FSA) 작업이 수행되고 있다. FSA란 위험도(risk)분석과 비용-효과 평가(cost-benefit assessment)를 바탕으로 인명, 해양환경 및 재산의 보호를 포함한 해사안전의 향상을 목적으로 한 구조화되고 체계적인 방법론으로서 새로운 법규의 평가, 기존법규와 새로운 (제안) 법규와의 비교, 그리고 여러 이해관계자의 공감대 형성을 통해 법규 변경/개발을 용이하게 하는 수단이다(IMO, 2007). 본 연구는 국적일반화물선의 안전성 평가를 위한 수단으로서 IMO FSA방법론의 유용성을 확인하고, 향후 IMO에서의 '일반화물선 안전'에 대한 논의에 대응하기 위한 기초자료의 확보를 목적으로 하고 있다. 본 논문에서는 국적일반화물선에 대한 FSA의 1, 2 단계에 해당하는 위험요소 식별(Hazard identification) 및 사고시나리오에 대한 위험도 분석(Risk analysis) 결과를 중심으로 소개하였다.

선박공간분석을 통한 실습전용선박의 선박능력 평가 기준에 관한 연구 (A Study on the Ship Ability Evaluation Criteria for Training-only ship through Ship Space Analysis)

  • 박기태
    • 해양환경안전학회지
    • /
    • 제28권1호
    • /
    • pp.100-106
    • /
    • 2022
  • 선박들은 목적에 따라 건조되어 개별의 목표를 가지고 운영된다. 운영상 목표는 선박의 설계에 반영되어 필요한 선박능력을 결정하는 주요 기준이 된다. 일반적으로 화물선과 여객선은 수송능력을 중심으로 선박의 운항부분과 화물 또는 여객의 수용능력부분으로 선박능력이 객관적으로 평가되고 있다. 필요한 선박능력을 감안하여 건조된 선박은 안정성과 같은 기본적인 특성 외에 경제성, 친환경성 등의 효과들 또한 기대 할 수 있다. 이에 따라 국내 해기사 양성에서 중추적인 역할을 하고 있는 각 기관의 실습전용선박 관리 분야에서도 선박능력 개념의 효과적인 활용이 기대된다. 본 연구에서는 최근 시차를 두고 건조된 한국해양수산연수원의 실습전용선박 2척의 선박내부 공간 분석을 통하여 실습전용선박의 선박능력 평가 기준에 대해 기초적인 방향성을 확인하였으며 국내의 실습전용선박 또는 범용 실습선박 건조 과정 중 예산확보와 설계에서 선박능력 기준의 활용 가능성을 도출하였다.

CFD validation and grid sensitivity studies of full scale ship self propulsion

  • Jasak, Hrvoje;Vukcevic, Vuko;Gatin, Inno;Lalovic, Igor
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제11권1호
    • /
    • pp.33-43
    • /
    • 2019
  • A comparison between sea trial measurements and full-scale CFD results is presented for two self-propelled ships. Two ships considered in the present study are: a general cargo carrier at Froude number $F_n=0:182$ and a car carrier at $F_n=0:254$. For the general cargo carrier, the propeller rotation rate is fixed and the achieved speed and trim are compared to sea trials, while for the car carrier, the propeller rotation rate is adjusted to achieve the 80% MCR. In addition, three grids are used for each ship in order to assess the grid refinement sensitivity. All simulations are performed using the Naval Hydro pack based on foam-extend, a community driven fork of the OpenFOAM software. The results demonstrate the possibility of using high-fidelity numerical methods to directly calculate ship scale flow characteristics, including the effects of free surface, non-linearity, turbulence and the interaction between propeller, hull and the flow field.

Identification of Impact Factors in Ship-to-Ship Mooring Through Sensitivity Analysis

  • Lee, Sang-Won;Lee, Hyeong-Tak;Kim, Dae-Gun;Cho, Ik-Soon
    • 한국항해항만학회지
    • /
    • 제43권5호
    • /
    • pp.310-319
    • /
    • 2019
  • With the recent increase in the volume of liquid cargo transportation, there is a need for STS( Ship To Ship) globally. In the case of the STS mooring, the safety assessment should be conducted according to other criteria because mooring is different from the general mooring at the quay, but there is no separate standard in Korea. Thus in this study, STS mooring simulation and sensitivity analysis using OPTIMOOR program, the numerical analysis program, was conducted to identify the characteristics of the STS mooring. The target sea modeled the Yeosu port anchorage in Korea and the target ship was selected as the case of VLCC (Very Large Crude Oil Carrier)-VLCC. Through the numerical simulation and sensitivity analysis, the characteristics of STS mooring were identified. Also based on these results, we focused on establishing the standard for STS mooring safety assessment. Numerical simulation results show that the STS mooring safety can be changed according to a ship's cargo loading condition, pre-tension of mooring line, sea depth, encounter angle with the weather, and the weather condition. Additionally, the risk matrix is prepared to establish the safe external force range in the corresponding sea area. This result can be used to understand the mooring characteristics of STS and contribute to the revision of mooring safety assessment criteria.

인천항 입.출항 선박형태에 따른 기여도 분석에 관한 연구 (A Study on Level of Economical Contribution due to Ship Type in Incheon Port)

  • 남흥우;남영우;조용철;이창호
    • 대한안전경영과학회지
    • /
    • 제13권2호
    • /
    • pp.203-210
    • /
    • 2011
  • Incheon Port has been served as not only the center of the Yellow Sea and port for trade with China but also domestic gateway port for the metropolitan area, playing a professional role as the greatest domestic Port which processes a variety of items such as imported raw materials, bulk cargo, oil and gas and so on. This study was conducted based on step by step business process between port entry and departure of ship, and incurred cost according to port industry classification and performance on the port facility. Bulk cargo and general cargo such as grain, food, steel, scrap metal, wood, coal, LNG, LPG and oil etc., which have a vast majority of import goods, have been treated by 57,062 thousand tons and 7,409 thousand tons of container cargo were processed at Incheon Port in 2009. Bulk vessels and carriers moving items such as LPG, LNG and oil recorded 38,836 thousand won and full-container vessels recorded 11,001 thousand won as the amount of notified port facility usage fees in 2008.

국적일반화물선 초기안전성평가(High-level FSA) 연구(2) (A Study on High-level FSA for Korean-flagged General Cargo Ships)

  • 이종갑;나성;김홍태;박재홍
    • 한국항해항만학회지
    • /
    • 제35권1호
    • /
    • pp.23-30
    • /
    • 2011
  • 본 논문은, 국적일반화물선 공식안전성평가(Formal Safety Assessment, 이하 FSA) 연구의 1, 2 단계에 해당하는 위험요소 식별(Hazard identification) 및 식별된 사고 시나리오에 대한 위험도 분석(Risk analysis) 결과를 소개한 "국적일반화물선 초기안전성평가 연구(1)"에 이어 FSA 연구의 3, 4 그리고 5단계를 수행한 내용으로, 국적일반화물선의 운용 중 발생 가능한 위험을 저감할 수 있는 위험도제어방안들(Risk Control Options)을 식별하는 단계(Step 3)와 식별된 위험도제어방안들 중 전문가 의견수렴을 통하여 선별된 위험도제어방안들을 대상으로 한 비용-효과 평가 단계(Step 4: Cost-Benefit Assessment) 그리고 비용-효과 평가의 결과를 정리하여 국적일반화물선의 안전성 제고를 위한 구체적인 방안을 제안하는 단계(Step 5: Recommendation for Decision Making)의 결과를 소개하였다.