• Communications for Statistical Applications and Methods
• /
• v.14 no.3
• /
• pp.483-495
• /
• 2007

In a general fractional factorial design, the n-levels of a factor are coded by the $n^{th}$ roots of the unity. Pistone and Rogantin (2007) gave a full generalization to mixed-level designs of the theory of the polynomial indicator function using this device. This article discusses the optimal blocking scheme for nonregular designs. According to hierarchical principle, the minimum aberration (MA) has been used as an important criterion for selecting blocked regular fractional factorial designs. MA criterion is mainly based on the defining contrast groups, which only exist for regular designs but not for nonregular designs. Recently, Cheng et al. (2004) adapted the generalized (G)-MA criterion discussed by Tang and Deng (1999) in studying $2^p$ optimal blocking scheme for nonregular factorial designs. The approach is based on the method of replacement by assigning $2^p$ blocks the distinct level combinations in the column with different blocks. However, when blocking level is not a power of two, we have no clue yet in any sense. As an example, suppose we experiment during 3 days for 12-run Plackett-Burman design. How can we arrange the 12-runs into the three blocks? To solve the problem, we apply G-MA criterion to nonregular mixed-level blocked scheme via the mixed-level indicator function and give an answer for the question.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.50-54
• /
• 2013

In this work, the effects of blocking layer and optimally fabricated electrolyte were investigated with respect to impedance and conversion efficiency of the cells.A layer of $TiO_2$ less than ~200nm in thickness, as a blocking layer, was deposited by rf sputtering onto the F:$SnO_2$ (FTO) glass to be isolated from the electrolyte in dye-sensitized solar cells (DSCs). Also, optimum condition of electrolytes preparation for DSCs was investigated. 3-methoxyppropionitrie and redox pairs with LiI and $I_2$ were used as solvents for fabrication of electrolyte. The electrochemical impedances of DSCs using this photo-anode were $R_1$: 13.8, $R_2$: 15.1, $R_3$: 11.9 and $R_h$: $8.3{\Omega}$, respectively. The $R_2$ impedance related by electron transportation from porous $TiO_2$ to FTO showed lower than that of normal DSCs. The photo-conversion efficiency of prepared DSCs was 6.4% and approximately 1.3% higher than general one.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.1
• /
• pp.79-86
• /
• 2003

A new quantization constraint set based on the theory of Projection onto Convex Set(POCS) is proposed to reduce blocking artifact appearing in block-coded images. POCS-based postprocessing for alleviating the blocking artifact consists of iterative projections onto smoothness constraint set and quantization constraint set, respectively. In general, the conventional quantization constraint set has the maximum size of range where original image data can be included, therefore over-blurring of restored image is unavoidable as iteration proceeds. The projection onto the proposed quantization constraint set can reduce blocking artifact as well as maintain the clearness of the decoded image, since it controls adaptively the size of quantization constraint set according to the DCT coefficients. Simulation results using the proposed quantization constraint set as a substitute for conventional quantization constraint set show that the blocking artifact of the decoded image can be reduced by the small number of iterations, and we know that the postprocessed image maintains the distinction of the decoded image.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.344-348
• /
• 2011

A layer of $TiO_2$ thin film less than ~200nm in thickness, as a blocking layer, was deposited by 13.56 MHz radio frequency magnetron sputtering method directly onto the anode electrode to be isolated from the electrolyte in dye-sensitized solar cells (DSCs). This is to prevent the electrons from back-transferring from the electrode to the electrolyte ($I^-/{I_3}^-$). The presented DSCs were fabricated with working electrode of F:$SnO_2$(FTO) glass coated with blocking $TiO_2$ layer, dye-attached nanoporous $TiO_2$ layer, gel electrolyte and counter electrode of Pt-deposited FTO glass. The effects of blocking layer were studied with respect to impedance and conversion efficiency of the cells. The, electrochemical impedances of DSCs using this electrode were $R_1$: 13.9, $R_2$: 15.0, $R_3$: 10.9 and $R_h$: $82{\Omega}$. The $R_2$ impedance related by electron movement from nanoporous $TiO_2$ to TCO showed lower than that of normal DSCs. The photo-conversion efficiency of prepared DSCs was 5.97% ($V_{oc}$: 0.75V, $J_{sc}$: 10.5 mA/$cm^2$, ff: 0.75) and approximately 1% higher than general DSCs sample.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.2
• /
• pp.1-7
• /
• 1996

In this paper, we analyzed the packet blocking probability of a finite buffer in a network interface unit. In general, a network interface unit which provides a means of interface between the network and computer has a microprocessor and a protocol processor for the network access protocols. It also has a receive buffer for the arriving packets from the network which is served by the microprocessor with service interruption by the protocol processor. In this paper, we modeled the receive buffer as a discrete time server with service interruption, and obtained the packet blocking probability using the mini-slot approximation.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.4
• /
• pp.10-19
• /
• 1998

With the advent of high-speed networks, the increasingly stringent performance requeirements are being placed on the underlying switching systems. Under these circumstances, simulation methods for evaluating the performace of such a switch requires vast computational cost and accordingly the importance of anlytical methods increases. In general, the performance analysis of a switch architecture is also a very difficult task in that the conventional queueing system such as switching systems, which consists of a large numbe of queues which interact with each other in a fiarly complicated manner. To overcome these difficulties, most of the past research results assumed that multiple queues become decoupled as the switch size grows unboundely large, which enables the conventional queueing theory to be applied. In this apepr, w analyze a non-blocking space-division ATM swtich with input queueing, and prove analytically the pheonomenon that virtual queues formed by the head-of-line cells become decoupled as the switch size grows unboundedly large. We also establish various properties of the limiting queue size processes so obtained and compute the maximum throughput associated with ATM switches with input queueing.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.351-359
• /
• 1999

We present a new approach to the analysis of mobile cellular communication systems under the environment of mixed platforms adopting a guard channel scheme. We assume general cell residence time distributions according to platform-types. Our system model is based on a heterogeneous M/G/c loss system with customer-dependent guard channels, where heterogeneous customers with different service time distributions have different numbers of their own guard channels. We develop the general formula of steady state probabilities for the heterogeneous M/G/c loss system with customer-dependent guard channels. The mean channel occupancy times of new and handoff calls are rigorously derived under a general setting. Finally, our numerical results show that the blocking probability and the forced termination probability are sensitive to the cell residence time distributions.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.1
• /
• pp.59-66
• /
• 2021

This study aimed to a basic research for the development of dye-sensitized solar cells that the wavelength band required for crop growth is passed, and the wavelength band that is not necessary for crop growth can be used for the generation of electricity. The transmissivity according to the illuminance was about 10% higher in the Blue filter and the Green filter than in the Red filter, but the transmissivity according to the PPFD was about 10% higher in the Red filter and the Blue filter than in the Green filter. In addition, the greenhouse attached with 30% infrared blocking filter was predicted to have a lower air temperature than other greenhouses, but it was investigated that there was no significant difference. Therefore, it was investigated that the application of the infrared cut filter would not be appropriate in a greenhouse that controls the temperature by opening a window. As a result of investigating, it was found that the Green and Blue filter greenhouses had the severe overgrowth and the stems grew weaker. The fresh weight of paprika in the infrared blocking filter greenhouse was the highest at 678.9g, and the growth of Red filter and the control greenhouses was relatively poor. Photosynthetic rate, amount of transpiration, and stomatal conductivity were the infrared blocking filter and control greenhouse higher than others. On the other hand, the water use efficiency did not show a big difference.

• Annals of Clinical Neurophysiology
• /
• v.4 no.2
• /
• pp.91-97
• /
• 2002

The field of critical care medicine has flourished, but an unfortunate result of improved patient survival in the intensive care unit is the occurrence of certain acquired neuromuscular disorders. During the last two decades, various neuromuscular disorders were recognized as common causes of weakness occurring in critically ill patients. The two most common disorders are an acute quadriplegic myopathy predominantly associated with the use of intravenous corticosteroids and neuromuscular junction blocking agents and severe systemic illness termed critical illness myopathy(CIM), and an axonal sensorimotor polyneuropathy termed critical illness polyneuropathy. I will review briefly about general components of the CIM.

• Journal of the Korean Society of Safety
• /
• v.23 no.1
• /
• pp.66-71
• /
• 2008

A new route to phthalocyanine complexes were developed to synthesize these products by fusion in the absence of solvent. This new method of synthesis without using solvent has advantages over the conventional synthetic methods since there are no risk of explosion and formation of harmful vapor from organic solvent. Reaction of PcFe with axial ligands such as $PcFe(4-VP)_2$[Pc: Phthalocyanine, 4-VP: 4-Vinylpyridine] and $PcFe(VIM)_2$[VIM: 1-Vinylimidazole] afforded powderlike, pure dark greenish blue colored products. The resulted products are soluble in $CH_2Cl_2$ and found to be complexes of the type $PcFeL_2$. Spectral properties were studied with ATR-FTIR and UV/Vis. Thermal and electrical characterization was also performed. Phthalocyanine complexes exhibit useful properties such as UV/Vis blocking, antistatic characteristics and excellent thermal stability and we anticipate various applicability in numerous products.