• BMB Reports
• /
• v.40 no.2
• /
• pp.172-179
• /
• 2007

PCR-mediated recombination describes the process of in vitro chimera formation from related template sequences present in a single PCR amplification. The high levels of genetic redundancy in eukaryotic genomes should make recombination artifacts occur readily. However, few evolutionary biologists adequately consider this phenomenon when studying gene lineages. The cytosolic glyceraldehyde-3-phosphate dehydrogenase gene (GapC), which encodes a NADP-dependent nonphosphorylating glyceraldehyde-3-phosphate dehydrogenase in the cytosol, is a classical lowcopy nuclear gene marker and is commonly used in molecular evolutionary studies. Here, we report on the occurrence of PCR-mediated recombination in the GapC gene family of Hibiscus tiliaceus. The study suggests that recombinant areas appear to be correlated with DNA template secondary structures. Our observations highlight that recombination artifacts should be considered when studying specific and allelic phylogenies. The authors suggest that nested PCR be used to suppress PCRmediated recombination.

• Journal of Microbiology
• /
• v.37 no.4
• /
• pp.248-255
• /
• 1999

We have analyzed the MRE3/REC114 gene of Saccharomyces cerevisiae, previously detected in isolation of mutants defective in meiotic recombination. We cloned the MRE3/REC114 gene by complementation of the meiotic recombination defect and it has been mapped to chormosome XIII. The DNA sequence analysis revealed that the MRE3 gene is identical to the REC114 gene. The upstream region of the MRE3/REC114 gene contains a T_4C site, a URS (upstream repression sequence) and a TR (T-rich) box-like sequence, which reside upstream of many meiotic genes. Coincidentally, northern blot analysis indicated that the three sizes of MRE3/REC114 transcripts, 3.4, 1.4 and 1.2 kb, are induced in meiosis. A less abundant transcript of 1.4 kb is detected in both mitotic and meiotic cells, suggesting that it is needed in mitosis as well as meiosis. To examine the role of the MRE3/REC114 gene, we constructed mre3 disruption mutants. Strains carrying an insertion or null deletion of the MRE3/REC114 gene showed slow growth in nutrient medium and the doubling time of these cells increased approximately by 2-fond compared to the wild-type strain. Moreover, the deletion mutant (${\delta}$mre3) displayed no meiotically induced recombination and no viable spores. The mre3/rec114 spore lethality can be suppressed by spo13, a mutation that causes cells to bypass reductional division. The double-stranded breaks (DSBs) which are involved in initiation of meiotic recombination were not detected in the analysis of meiotic chromosomal DNA from the mre3/rec114 disruptant. From these results we suggest that the MRE3/REC114 gene product is essential in normal growth and in early meiotic stages involved in meiotic recombination.

• Genomics & Informatics
• /
• v.21 no.2
• /
• pp.27.1-27.7
• /
• 2023

Recombination events complicate the evolutionary history of populations and species and have a significant impact on the inference of isolation-with-migration (IM) models. However, several existing methods have been developed, assuming no recombination within a locus and free recombination between loci. In this study, we investigated the effect of recombination on the estimation of IM models using genomic data. We conducted a simulation study to evaluate the consistency of the parameter estimators with up to 1,000 loci and analyze true gene trees to examine the sources of errors in estimating the IM model parameters. The results showed that the presence of recombination led to biased estimates of the IM model parameters, with population sizes being more overestimated and migration rates being more underestimated as the number of loci increased. The magnitude of the biases tended to increase with the recombination rates when using 100 or more loci. On the other hand, the estimation of splitting times remained consistent as the number of loci increased. In the absence of recombination, the estimators of the IM model parameters remained consistent.

• BMB Reports
• /
• v.40 no.3
• /
• pp.432-438
• /
• 2007

V(D)J recombination, a site-specific gene rearrangement process occurring during the lymphocyte development, begins with DNA double strand breaks by two recombination activating gene products (RAG1/2) and finishes with the repair process by several proteins including DNA-dependent protein kinase (DNA-PK). In this report, we found that RAG2 was specifically phosphorylated by DNA-PK at the $365^{th}$ serine residue, and this phosphorylated RAG2 affected the V(D)J recombination activity in cells in the GFP expression-based assay. While the V(D)J recombination activity between wild-type RAG2 and mutant S365A RAG2 in the assay using a signal joint substrate was undistinguishable in DNA-PK deficient cells (M059J), the activity with wild-type RAG2 was largely increased in DNA-PK proficient cells (M059K) in comparison with mutant RAG2, suggesting that RAG2 phosphorylation by DNA-PK plays a crucial role in the signal joint formation during V(D)J recombination.

• Research in Plant Disease
• /
• v.29 no.2
• /
• pp.193-199
• /
• 2023

The apple stem grooving virus (ASGV) is one of the most harmful latent viruses infecting pear orchards worldwide. To examine the genetic diversity of ASGV in Korean pear orchards, the complete coat protein (CP) gene of five ASGV isolates collected from various regions were identified. The five Korean ASGV isolates showed 88-96% nucleotide identity with the 11 isolates worldwide occurring elsewhere in the world. Phylogenetic analysis of five isolates, as well as the previously sequenced isolates, indicated that the ASGV clusters had no correlation with the host or geographical regions of origin. Recombination analysis showed that one of the five Korean isolates is a recombinant, with a recombination site in the CP gene region (nt 532-708). This study is the first report of natural recombination within the CP gene of ASGV isolates from pears grown in Korea.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.6
• /
• pp.1346-1352
• /
• 2005

We have developed a modified gene replacement method using PCR products containing short homologous sequences of 40- to 50-nt. The method required $\lambda$-Red recombination functions provided under the control of a temperature-sensitive CI857 repressor expressed from the $P_{lac}$ promoter in the presence of IPTG on an easily curable helper plasmid. The method promoted the targeted gene replacements in the Escherichia coli chromosome after shifting cultures of the recombinogenic host, which carries the helper plasmid, to $42^{\circ}C$ for 15 min. Since this method employs $\lambda$-Red recombination functions expressed from the easily curable helper plasmid, multiple rounds of gene replacements in the E. coli chromosome would be possible. The procedures described herein are expected to be widely used for metabolic engineering of E. coli and other bacteria.

• Journal of Food Hygiene and Safety
• /
• v.14 no.4
• /
• pp.397-407
• /
• 1999

A survey was conducted to investigate the attitudes of the food specialist to the food developed by gene recombination. The mail survey was distributed to 1,400 food specialists and received 464, a response rate of 33.1%. Respondents were asked about knowledge, concerns of potential hazards, purchasing and labeling of the gene recombination foods. Most respondents (98.7%) have some knowledge on the gene recombination foods. 91.3% of respondents recognized necessity of gene recombination technology. However, they also point out its potential hazards (80.9%). The groups with less knowledge showed their increased worry on the hazard in comparison with ones of having more knowledge(p<0.01). The result indicated that there was negative relationship between knowledge and worry on the gene recombination foods. The groups with more knowledge showed their increased purchasing on gene recombination foods in comparison with ones of having less knowledge(p<0.01). The result indicated that there was positive relation-ship between their purchase intent for gene recombination foods and knowledge. 68.4% of respondents showed their interest on purchasing the gene recombination foods. In this group, most of them (44.9%) has on condition that low cost (27.0%). In addition, they also have not use the foods for their children (17.9%) if they buy it. Most respondents (85.3%) want labeling on the gene recombination foods.

• The Plant Pathology Journal
• /
• v.32 no.3
• /
• pp.173-181
• /
• 2016

Gene disruption by homologous recombination is widely used to investigate and analyze the function of genes in Fusarium fujikuroi, a fungus that causes bakanae disease and root rot symptoms in rice. To generate gene deletion constructs, the use of conventional cloning methods, which rely on restriction enzymes and ligases, has had limited success due to a lack of unique restriction enzyme sites. Although strategies that avoid the use of restriction enzymes have been employed to overcome this issue, these methods require complicated PCR steps or are frequently inefficient. Here, we introduce a cloning system that utilizes multi-fragment assembly by In-Fusion to generate a gene disruption construct. This method utilizes DNA fragment fusion and requires only one PCR step and one reaction for construction. Using this strategy, a gene disruption construct for Fusarium cyclin C1 (FCC1), which is associated with fumonisin B1 bio-synthesis, was successfully created and used for fungal transformation. In vivo and in vitro experiments using confirmed fcc1 mutants suggest that fumonisin production is closely related to disease symptoms exhibited by F. fujikuroi strain B14. Taken together, this multi-fragment assembly method represents a simpler and a more convenient process for targeted gene disruption in fungi.

• Reproductive and Developmental Biology
• /
• v.38 no.2
• /
• pp.71-77
• /
• 2014

The specific genetic modification in porcine somatic cells by gene targeting has been very difficult because of low efficiency of homologous recombination. To improve gene targeting, we designed three kinds of knock-out vectors with ${\alpha}1,3$-galactosyltransferase gene (${\alpha}1,3$-GT gene), DT-A/pGT5'/neo/pGT3', DT-A/NLS/pGT5'/neo/pGT3' and pGT5'/neo/ pGT3'/NLS. The knock-out vectors consisted of a 4.8-kb fragment as the 5' recombination arm (pGT5') and a 1.9-kb fragment as the 3' recombination arm (pGT3'). We used the neomycin resistance gene (neo) as a positive selectable marker and the diphtheria toxin A (DT-A) gene as a negative selectable marker. These vectors have a neo gene insertion in exon 9 for inactivation of ${\alpha}1,3$-GT locus. DT-A/pGT5'/neo/pGT3' vector contain only positive-negative selection marker with conventional targeting vector. DT-A/NLS/pGT5'/neo/pGT3' vector contain positive-negative selection marker and NLS sequences in upstream of 5' recombination arm which enhances nuclear transport of foreign DNA into bovine somatic cells. pGT5'/neo/pGT3'/NLS vector contain only positive selection marker and NLS sequence in downstream of 3' recombination arm, not contain negative selectable marker. For transfection, linearzed vectors were introduced into porcine ear fibroblasts by electroporation. After 48 hours, the transfected cells were selected with $300{\mu}g/ml$ G418 during 12 day. The G418-resistant colonies were picked, of which 5 colonies were positive for ${\alpha}1,3$-GT gene disruption in 3' PCR and southern blot screening. Three knock-out somatic cells were obtained from DT-A/NLS/ pGT5'/neo/pGT3' knock-out vector. Thus, these data indicate that gene targeting vector using nuclear localization signal and negative selection marker improve targeting efficiency in porcine somatic cells.

• Journal of Plant Biotechnology
• /
• v.42 no.3
• /
• pp.154-160
• /
• 2015

The plant breeding technology was developed with genetic engineering. Many researchers and breeders have turned from traditional breeding to molecular breeding. Genetically modified organisms (GMO) were developed via molecular breeding technology. Currently, molecular breeding technologies facilitate efficient plant breeding without introducing foreign genes, in virtue by of gene editing technology. Gene targeting (GT) via homologous recombination (HR) is one of the best gene editing methods available to modify specific DNA sequences in genomes. GT utilizes DNA repair pathways. Thus, DNA repair systems are controlled to enhance HR processing. Engineered sequence specific endonucleases were applied to improve GT efficiency. Engineered sequence specific endonucleases like the zinc finger nuclease (ZFN), TAL effector nuclease (TALEN), and CRISPR-Cas9 create DNA double-strand breaks (DSB) that can stimulate HR at a target site. RecQl4, Exo1 and Rad51 are effectors that enhance DSB repair via the HR pathway. This review focuses on recent developments in engineered sequence specific endonucleases and ways to improve the efficiency of GT via HR effectors in plants.