• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.770-776
• /
• 2000

Pasting gelatinization of acorn flours which were prepared with soaked nut and sediment at 7.8$^{\circ}C$ for 0, 1, 2, 3 and 4 days were investigated. The peak temperature of gelatinization of untreated acorn flour (0-0) by Rapid Visco Analyzer was 73.1$^{\circ}C$, respectively, but those of flours were decreased by soaking. Peak viscosity, setback and breakdown of acorn flours were increased by soaking. In addition, consistency was increased by soaking treatment. From the result of the pasting properties, gel formation ability of acorn flour was increased with increasing soaking days of acorn nut and soaking times of sediment. The gelatinization temperature examined by X-ray diffractometry was lowered with increasing of soaking days. The observation of microstructure through a scanning electron microscope revealed that gelatinized acorn flour showed loser their original shape and structure than that of with out soaking treatment (0-0). The degree of gelatinization under the fixed temperature increased with increasing soaking days. From these results, it might be concluded that the increase of soaking days and soaking times is the factor affecting the gelatinization of acorn flour.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.118-123
• /
• 2009

In order to find out the effect of low level of starch acetylation on physicochemical properties of potato starch, amylose content, digestibility of raw and gelatinized starch, thermal properties, pasting properties, and the swelling power of native and acetylated potato starches were measured. The amylose content was significantly lower in acetylated starch than in their counterpart native starches. Though a tendency in the decrease in digestibility of raw starch was observed with starch acetylation, acetylation did not alter the proportion of readily digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) of both raw and gelatinized potato starches. No clear increase in the swelling power was observed, however, the peak and onset gelatinization temperatures and the enthalpy required for starch gelatinization decreased with starch acetylation. Peak and breakdown viscosities were reduced due to acetylation of potato starch while final viscosity and set back were increased.

• Applied Biological Chemistry
• /
• v.37 no.6
• /
• pp.463-471
• /
• 1994

Physicochemical properties, gelatinization and retrogradation characteristics of surfactant added sweet potato starches were investigated. Three different surfactants, SSL (sodium stearoyl-2-lactylate), Dimodan (mono/diglyceride) and SE1670 (sucrose fatty acid ester 1670) were used. Shapes and crystallinities of starch granules were not changed by the addition of surfactants. Total lipid contents increased and the amylose content decreased by the addition of surfactants and the order was as follows: SE1670>SSL>Dimodan. The swelling power and solubility at $80^{\circ}C$ decreased in the surfactant added starches. By amylograph, initial gelatinization temperature of untreated sweet potato starch was $72.5^{\circ}C$, and did not change by the addition of surfactants, but SE1670 or Dimodan added starch showed the peak viscosity. The peak temperature of gelatinization and enthalpy of untreated starch by DSC were $53.9^{\circ}C$ and 1.3cal/g, respectively. The peak temperature increased by the addition of surfactants, while the enthalpy decreased. In gelatinization by alkali, the viscosity was lower in surfactant added starches than in untreated starch at concentration. The degree of retrogradation by ${\alpha}-amylase-iodine$ method was a lower in SSL and SE1670 added starches than untreated starch and the enthalpy by DSC also decreased in surfactant added and retrograded starches.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.4
• /
• pp.542-547
• /
• 2010

Physico-chemical properties of starches from potato cultivars with different colors were investigated. White Atlantic potato had 10% higher starch yield than violet Bora Valley potato. It turned out that the shape and structure of Atlantic and Bora Valley potato starch were the same by mechanical analysis using X-ray and SEM. The ratio of $50\;{\mu}m$ particle in starches from Atlantic and Bora Valley potato was $45.44\pm2.79%$ and $42.37\pm1.03%$ respectively. The particle size of Atlantic potato starch was less than that of Bora Valley; however, there was no significant difference (p<0.05). As for moisture coupling, there was no difference (p<0.05) between the two potatoes. Swelling power showed a high increase from $65^{\circ}C$ to $80^{\circ}C$. The swelling power of Atlantic starch was higher by about 0.3% than that of Bora Valley at $90^{\circ}C$. Since Atlantic has smaller starch particles than Bora Valley, more starch particles are contained in the same size, and hence a difference in swelling power. As a result of measuring the gelatinization of potato starches from Atlantic and Bora Valley, a higher gelatinization start, climax, and complete temperatures occurred at Bora Valley than Atlantic. As for gelatinization enthalpy, Bora Valley starch with a higher gelatinization temperature consumed more energy for gelatinization.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.428-438
• /
• 1995

The gelatinization properties of corn and waxy corn starch doughs were examined at various moisture contents, heating temperatures and heating times. The onset temperatures of gelatinization with 1% CMC using Brabender Amylograph were $64^{\circ}C$ for both corn and waxy corn starch. In the gelatinization properties using DSC, onset temperature$(T_o)$, maximum peak temperature$(T_p)$, completion temperature$(T_c)$ and enthalpy of the corn starch were $68.15^{\circ}C,\;74.01^{\circ}C,\;85.65^{\circ}C$ and $3.2\;cal/gram$ respectively. While those of the waxy corn starch were $68.24^{\circ}C,\;75.43^{\circ}C,\;93^{\circ}C$ and $4.2\;cal/gram$ respectively. In enzymatic analysis, when the moisture content increased from 36% to 52% and heating temperature from $60^{\circ}C$ to $100^{\circ}C$, the gelatinization degree of starch dough increased from about 10% to about 62%. The gelatinization degree of waxy corn starch dough was $15{\sim}20%$ higher than that of corn starch dough under the same gelatinization conditions. The regression equations of gelatinization degree (Y) of starch dough in the range of $36{\sim}52%$ moisture content $(X_1)\;60{\sim}100^{\circ}C$ heating temperature $(X_2)\;and\;0{\sim}2.0$ min heating time $(X_3)$ were examined using response surface analysis. The regression equation of corn starch dough was: $Y=28.659+8.638\;X_}+15.675\;X_2+7.770\;X_3-1.620\;{X_1}^2+10.790\;X_1X_2-4.220\;{X_2}^2+0.510\;X_1X_3+1.980\;X_2X_3-6.850\;{X_3}^2\;(R^2=0.9714)$ and that of waxy corn starch dough was: $Y=32.617+12.535\;X_1+20.470\;X_2+8.608\;X_3+4.093\;{X_1}^2+13.550\;X_1X_2-4.467\;{X_2}^2+1.560\;X_1X_3+2.160\;X_2X_3-9.527\;{X_3}^2$\;(R^2=0.9621)$. As the moisture content, heating temperature and heating time increased, the reaction rate constant(k) of gelatinization increased. The greatest reaction rate constant was observed at initial 0.5 min heating time of 1st gelatinization stage. At the heating temperature of $90^{\circ}C$, gelatinization of starch dough was completed almost in the initial 0.5 min heating time. The reaction rate constant of waxy corn starch dough was higher than that of corn starch dough under the same gelatinization conditions. At the 52% moisture content, the regression equation between reaction rate constant(k) and heating temperature(T) for corn starch dough was $log\;k=11.1140-4.1226{\times}10^3(1/T)$ (r=-0.9520) and that of waxy corn starch dough was $log\;k=10.1195-3.7090{\times}10^3(1/T)$ (r=-0.9064).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.4
• /
• pp.421-428
• /
• 2007

Eight varieties of milled rice showing different palatabilities were studied in order to identify the relationship between physicochemical properties of carbohydrate components and their fine structure. Gopumbyeo showed the highest palatability value among the eight varieties tested. Both peak viscosity and breakdown were hightest in Hitomebore, and lowest in Mihyangbyeo. No relationship was indicated between the palatability and gelatinization properties. The amylose content of starch showed a significant difference among the varieties tested. However, no relationship was found between the structure of amylose and the palatability of milled rice. The degree of branching(B/A value) was highest in Saechucheongbyeo, and lowest in Palgongbyeo in fine structure of amylopectin. But no relationship was indicated between the B/A values and the palatability of milled rice. Difference was indicated in properties of gelatinization of starch by differential scanning calorimetry. The enthalphy for gelatinization showed a significant difference among the varieties. However, no relationship was found between the enthalphy for gelatinization and the palatability of milled rice. Monosaccharide in endosperm was composed of rice were compound of rhamnose, fucose, ribose, arabinose, and xylose. The total content of monosaccharides was highest in Saechucheongbyeo, and lowest in Palgongbyeo. However, 7 varieties of milled rice, expect Palgongbyeo, showed no relationship between the palatability and monosaccharides contents.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.545-550
• /
• 2003

The effect of ${\beta}-glucan$ on gelatinization of barley starch was studied. By the rapid visco-analyzer measurement, gelatinization of starch became rapid and viscosity increased largely on the RVA pattern by addition of ${\beta}-glucan$ to starch. The results of differential scanning calorimeter showed that molecular structure of starch was getting stabilized through shifting up of gelatinization temperature and increase in enthalpy by addition of ${\beta}$-glucan. X-ray diffraction pattern also showed the same results as differential scanning calorimeter. But it was revealed that addition of ${\beta}$-glucan to starch didn't affect characteristics such as microscopic observation, solubility, swelling power, and iodine binding properties during gelatinization of starch.

• Korean journal of food and cookery science
• /
• v.27 no.1
• /
• pp.11-19
• /
• 2011

In this study, the physicochemical properties of buckwheat flour and quality characteristics of brown-rice doughs containing various concentrations of buckwheat flour stored at $-18^{\circ}C$ for 4 weeks and fermented were studied. The total polyphenolic contents, electron donating ability (EDA) of 0.5%, gelatinization onset temperature (To), gelatinization peak temperature (Tp), and gelatinization conclusion temperature (Tc) of buckwheat flour were 1,920.10mg%, 6.95%, $70.11^{\circ}C$, $78.21^{\circ}C$, and $84.05^{\circ}C$, respectively. There were no significant differences in the amount of yeast between brown-rice Jeung-pyun dough samples containing different levels of buckwheat flour and stored for different time periods. The amounts of carbon dioxide gas evolved from the brown-rice doughs were increased by increasing the concentration of buckwheat flour. The pH of brown-rice dough samples decreased with increasing storage period. Therefore, frozen brown-rice dough containing 6-15% buckwheat flour and stored for 3 weeks were the most desirable.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.3
• /
• pp.99-105
• /
• 2023

Starch characteristics and pasting properties of Tongil-type rice varieties with different amylose content were analyzed. Three different Tongil-type rice varieties and one Japonica-type rice variety were examined for their properties. Tongil-type rice varieties have longer panicles and higher rice yield (721-765 kg per 10a) than Boramchan, a Japonica-type high-yield rice variety. The protein content of the Tongil-type rice variety was higher than that of Boramchan. Japonica-type rice varieties had lower amylose content than Japonica-type rice varieties, except for Amimyeon (Milyang355). Amimyeon had higher protein content than the other varieties, and its amylose content was particularly high at 39.2%. The distribution of starch granule sizes of the four varieties was similar, and the particle size corresponding to D50 was approximately 87.8-81.9 ㎛. The pasting properties of rice flour varied among varieties. The Dasanbyeo and Hanarum2 amylogram patterns were similar. These two varieties had a higher peak viscosity (PV) and lower setback (SB) than Boramchan. In the case of Amimyeon, the hot paste viscosity (HPV), cool paste viscosity (CPV), and SB were significantly higher than those of the other Toingil-type varieties, and the breakdown (BD) was very low, showing pasting properties significantly different from that of the other varieties. The onset (T_o), peak (T_p), and conclusion temperature (Tc) of gelatinization of rice flour from Amimyeon were lower than those of the other tested varieties. In addition, the gelatinization temperature, measured using differnetial scanning calorimetry (DSC), and BD, measured using al rapid visco analyzer (RVA) were low in Amimyeon. Amylose content showed a high positive correlation with pasting time (PTi), HPV, and SB and a negative correlation with PV and BD.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.6
• /
• pp.1251-1255
• /
• 1999

The sugar alcohols are useful alternatives to sucrose in confections because they provide desirable taste but lessen the potential risks for dental caries. The effects of sugar alcohol and their interaction on starch pasting properties were determined by the viscoamylograph with the concentration of 30%, 20%, 10% sugar alcohol in 1% CMC. The disaccharides, lactitol, maltitol, and isomalt, delayed pasting more than did monosaccharides, sorbitol and xylitol. With regard to the solubility in water, sorbitol and xylitol are more soluble than sucrose, maltitol and lactitol are almost equal and isomalt is less soluble than sucrose. Sorbitol and xylitol were highest on gelatinization. But their retrogradation occurred faster than other sugar alcohols. Lactitol and maltitol decreased gel strength more than did sucrose and other sugar alcohols.