• 전기전자학회논문지
• /
• 제22권1호
• /
• pp.1-5
• /
• 2018

Sol-gel 공법을 이용하여, p-형 CuO 박막 트랜지스터를 제작하였다. 제작된 CuO 박막 트랜지스터는 copper (II) acetate monohydrate 를 전구체로 사용하였다. $500^{\circ}C$ 열처리 후에 형성된 전구체는 p-형 CuO 박막이 됨을 확인하였다. 또한 전구체를 형성하기 전 기판표면의 $UV/O_3$ 조사량에 따른 CuO 박막 트랜지스터의 전기적 특성변화에 대하여 연구하였으며, 600 초동안 $UV/O_3$를 조사한 경우 제작된 CuO 박막 트랜지스터는 $5{\times}10^{-3}\;cm^2/V{\cdot}s$ 의 이동도와 약 $10^2$의 온/오프 전류비를 보여주었다.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.815-830
• /
• 2017

Due to numerous environmental concerns in recent years, the search for and the development of sustainable technologies have been pursued. In particular, environmentally friendly methods of soil improvement, such as the potential use of biopolymers, have been researched. Previous studies on the use of biopolymers in soil improvement have shown that they can provide substantial strengthening efficiencies. However, in order to fully understand the applicability of biopolymer treated soils, various properties of these soils such as their dynamic properties must be considered. In this study, the dynamic properties of gel-type biopolymer treated soils were observed through the use of resonant column tests. Gellan gum and Xanthan gums were the target gel-type biopolymers used in this study, and the target soil for this study was jumunjin sand, the standard sand of Korea. Through this study it was demonstrated that biopolymers can be used to enhance the dynamic properties of the soil, and that they offer possibilities of reuse to reduce earthquake related soil failures.

• 한국축산식품학회지
• /
• 제37권2호
• /
• pp.200-209
• /
• 2017

The purpose of this study was to evaluate the effects of bundle type (BT) and substitution with spent laying hen (SH) surimi on quality characteristics of imitation crabsticks made from Alaska Pollack (AP) during 6 wk of cold storage. Diagonally bundled samples had poorer gel characteristics and more lipid oxidation when compared with straight bundled ones (p<0.05). The color of diagonally bundled imitation crabsticks deteriorated with storage time (p<0.01). However, BT did not affect sensory characteristics (p>0.05). SH substitution had an effect on most quality characteristics of imitation crabsticks; darker and poorer gel characteristics were observed and its effect on sensory evaluation was seen at the initial storage. Thus, BT and SH substitution can be considered to have a slight effect on eating quality of imitation crabsticks, despite their negative effects on color, gel characteristics, and lipid oxidation.

• Archives of Plastic Surgery
• /
• 제41권6호
• /
• pp.734-739
• /
• 2014

Background Rupture is an important complication of breast implants. Before cohesive gel silicone implants, rupture rates of both saline and silicone breast implants were over 10%. Through an analysis of ruptured implants, we can determine the various factors related to ruptured implants. Methods We performed a retrospective review of 72 implants that were removed for implant rupture between 2005 and 2014 at a single institution. The following data were collected: type of implants (saline or silicone), duration of implantation, type of implant shell, degree of capsular contracture, associated symptoms, cause of rupture, diagnostic tools, and management. Results Forty-five Saline implants and 27 silicone implants were used. Rupture was diagnosed at a mean of 5.6 and 12 years after insertion of saline and silicone implants, respectively. There was no association between shell type and risk of rupture. Spontaneous was the most common reason for the rupture. Rupture management was implant change (39 case), microfat graft (2 case), removal only (14 case), and follow-up loss (17 case). Conclusions Saline implants have a shorter average duration of rupture, but diagnosis is easier and safer, leading to fewer complications. Previous-generation silicone implants required frequent follow-up observation, and it is recommended that they be changed to a cohesive gel implant before hidden rupture occurs.

• 한국분말재료학회지
• /
• 제27권1호
• /
• pp.58-62
• /
• 2020

Recently, electrochromic devices (ECDs) have gathered increasing attention owing to their high color contrast and memory effect, which make them highly applicable to smart windows, auto-dimming mirrors, sensors, etc. Traditional ECDs have a sandwich structure that contains an electrochromic layer between two ITO substrates. These sandwich-type devices are usually fabricated through the lamination of two electrodes and followed by the injection of a liquid electrolyte in the inner space. However, this process is sometimes complex and time consuming. In this study, we fabricated ECDs with a lateral electrode structure that uses only an ITO substrate and an all-in-one electrochromic gel, which is a mixture of electrolyte and electrochromic material. Furthermore, we investigated the EC properties of the lateral-type device by comparing it with a sandwich-type device. The lateral-type ECD shows strong blue absorption as the applied voltage increases and has a competitive coloration efficiency compared to the sandwich-type device.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.377-382
• /
• 2010

젤 추진제와 유변학적 특성이 유사한 모사 젤 추진제를 물, Carbopol 941, NaOH 농축액을 혼합하여 제작하였고, $Al_2O_3$ 나노 입자를 첨가하여 점도 특성을 비교하였다. 두 가지 모사 추진제의 물성치를 바탕으로 곡관 덕트 내에서의 유동특성을 수치모사하여 해석하였고 덕트에 Dean vortices가 발생하는 임계 Dean 수를 도출하였다. 젤-나노 추진제의 경우 비록 높은 겉보기 점성계수를 가지나 젤 추진제와 비교시 같은 범위의 임계 Dean 수가 도출되었다. 이는 Fellouah et al.[1]이 제시한 바와 같이 비슷한 값의 Power law 지수에 기인하는 것으로 판단된다.

• 대한치과보철학회지
• /
• 제58권1호
• /
• pp.23-29
• /
• 2020

목적: 이번 후향적 연구의 목적은 수압을 이용하는 방식을 변형한 방식인 S-reamer 와 겔 형태의 이식재를 이용한 상악동 거상술을 시행한 임플란트의 5년 이상 추적 관찰을 함으로써 성공률과 생존률을 조사하여 이 술식에 대한 평가를 하는데 있다. 재료 및 방법: 2008년에서 2014년까지 환자들을 추적 관찰하였다. 관찰된 환자는 59명이었고 식립 임플란트는 117개였다. 남성 34명, 여성 25명이고 연령대는 다양하였다. 잔존 수직 골의 골 량은 1 - 6 mm로 다양하였다. 상악동 거상술은 막의 천공없이 상악동을 천공하는데 S-reamer를 사용하였고 막을 거상하는데 겔 형태의 이식재를 사용하여 상악동 거상술을 시행하였다. 모든 임플란트는 거상과 동시에 식립하였고 5 - 6개월 치유 기간 후 보철물을 장착하였다. 방사선 검사는 추적 검사 할 때와 식립 후 바로 찍은 방사선 검사를 비교하였다 그리고 탐침을 통하여 화농여부, 염증여부, 출혈여부 등등 임상 검사를 통하여 검진 평가 하였다. Buser의 성공 기준을 참고하였고 모든 임플란트를 성공 임플란트, 생존 임플란트, 실패 임플란트로 분류하였다. 결과: 실패하여 제거한 임플란트는 5개였고 골 소실을 동반한 급성 염증 치료를 했거나 염증을 보인 임플란트가 4개였다. 생존율은 95.7%이고 성공률은 92.3%였다. 결론: S-reamer와 겔 형태의 이식재를 이용한 상악동 거상술이 1 - 6 mm 잔존 골이 있는 상황에서 막 천공이 없이 상악동을 거상할 수 있는 성공적인 술식임을 알 수 있었다.

• 한국환경성돌연변이발암원학회지
• /
• 제18권2호
• /
• pp.83-88
• /
• 1998

To detect the mutation in a given sequence, there are variety of methods developed by use of the gel electrophoresis. One of the methods, TGGE (Temperature Gradient Gel Electrophoresis), is a popular technique because it can detect mutations in DNA fragment with ease and at low cost. This study used 200 bp BamHI-digested DNA fragment containing the human $\varepsilon$-globin promoter which was mutated[$\varepsilon$ F1*(-141), GATA- I*(-163), and GATA-1* & $\varepsilon$F1]. This BamHI-digested DNA fragment was directly used to detect the mutated DNA fragment on 50% denaturant gel with temperature gradient of 45$^{\circ}C$ through $53^{\circ}C$. In agreement with the theoretical result of MELTSCAN program (Brossette and Wallet, 1994) the mobilities of mutated DNA fragments were shown to be nearly distinguished on the temperature gradient gel. In contrast to the above result the heteroduplex analysis under the temperature gradient condition was shown to detect the mutated DNA fragments through the heteroduplex formation between strands of mutated DNA and wild-type DNA.

• KSTLE International Journal
• /
• 제10권1_2호
• /
• pp.23-26
• /
• 2009

In this work the tribological characteristics were compared between ZnO coatings on glass substrate prepared by sputtering and sol-gel methods. In order to assess the effects of processing method on the tribological characteristics, the friction and wear properties of the coatings were measured by using a reciprocating type of micro-tribotester. The sputtered ZnO coatings were prepared on a glass substrate at room temperature, $150^{\circ}$, and $300^{\circ}$. The ZnO coatings prepared by sol-gel method were heat-treated in air atmosphere at $550^{\circ}$ for one hour. The crystal structure and surface morphology of the coatings were measured by X-ray diffraction (XRD) and Atomic Force Microscope (AFM), respectively. The experimental results showed that overall the sputtered coatings exhibited better friction and wear properties than coatings prepared by sol-gel method. The sputtered coating grown at room temperature had a relatively low friction coefficient of 0.14 and superior wear resistance compared with the other coatings. Nevertheless, sol-gel method of coating ZnO on glass is beneficial for economical coating of a large surface area.

• 폴리머
• /
• 제32권1호
• /
• pp.85-89
• /
• 2008

이온성 액체인 N-methoxymethyl-N-methylpyrrolidium bis(trifluoro-methansulfonyl)imide (MPSI)를 첨가제로 함유하는 acrylate 계열의 단량체를 다관능기형 acrylate 가교제와 함께 carbonate 용매에서 중합, 겔형의 고분자 전해질을 합성하였다. 고분자 전해질의 이온전도성은 고분자의 함량, 가교제의 종류, 이온성 액체의 함량에 따라 측정되었으며, 인장강도를 조사하여 고분자 및 이온성 액체의 함량이 기계적 물성에 미치는 영향을 파악하였다. 그 결과 성분의 최적화는 고분자 함량 15 wt%, 이온성액체 30 wt% 그리고 5 wt%의 가교제를 함유한 겔 전해액으로 달성되었고, 0.5 MPa의 기계적 물성과 0.8 mS/cm의 우수한 상온 이온 전도도를 나타내었다.