• Journal of the Korean Ceramic Society
• /
• v.45 no.10
• /
• pp.644-650
• /
• 2008

It has been proposed that the Cao-$SiO_2$ binary system can be good basic composition of bioactive glasses and glass-ceramics. In the present study, various kinds of Cao-$SiO_2$ gels were prepared by sol-gel method in order to control the microstructure which are related to their dissolution rate, induction period of apatite formation in body environment. Characterization of the gels were done by wet chemical analysis, SEM observation, FT-IR spectroscopy and XRD. The gelation time decreased with CaO content. However, the volume of all the dried gel decreased to 50% of the wet gels irrespective of increasement of CaO content. All the Cao-$SiO_2$ gels were amorphous and contained a large amount of silanol groups on their surfaces after heat treatment up to $800^{\circ}C$. The interconnected structure of the gel changed to agglomerated spherical powders when Ca content exceed to 20 mol%. Most of the Cao-$SiO_2$ gel showed amorphous when heat-treated up to $900^{\circ}C$. However, quartz and cristobalite was produced when heat-treated at $1000^{\circ}C$ and resultant microstructure of the gel contained microporous structure.

• Journal of radiological science and technology
• /
• v.43 no.5
• /
• pp.359-365
• /
• 2020

This study aimed to investigate the causes of bacterial growth to prevent infection caused by ultrasound gel and gel containers in contact with patients during ultrasonography. To investigate bacterial contamination during manufacturing or storage, we cultured ultrasound gels originally supplied from three manufacturers. To analyze bacterial growth according to the lapse of time and frequency of use of the ultrasound gel container, the gel and container were cultured at regular intervals every week for 4 weeks. In addition, to determine the source of infection, the examiner's hand was inspected with hand plate and the degree of bacterial contamination was measured before the test. As a result of the study, bacteria were not detected in the gel provided at the initial supply, and in the gel and gel container used repeatedly for 4 weeks, the same bacteria residing on the skin were identified in the examiner's hand, such as Staphylococcus epidermidis, Micrococcus luteus, Leuconostoc mesenteroid spp cremoris, Kocuria rhizophila, and etc. Separated strains were classified as those of the low- or non-pathogenicity; however, most of these strains may render fatal consequences to patients of lower level of immunity due to acquired tolerance to antibiotics. At week 1, when the number of tests was the highest, 44 colonies were identified, and at week 4, when the number of tests was the lowest, 4 colonies were identified. As r=0.994, it was found that the number of colonies increased as the number of tests increased. In conclusion, it was confirmed that the cause of the infection was not the ultrasound gel, but the examiner's hand. The ultrasound gel or gel container may be contaminated by skin flora of examiner's hands, which can cause opportunistic infection in patients with low immunity. The ultrasound gel or gel container may be contaminated by skin flora of examiner's hands, which can cause opportunistic infection in patients with low immunity. Therefore, it was confirmed that thorough hand disinfection was necessary to block healthcare-associated infections.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1956-1962
• /
• 2010

The formation of diverse spiral waves was studied in a polyacrylamide gel membrane with ruthenium(4-vinyl-4'-methyl-2,2'-bipyridine)bis(2,2'-bipyridine)bis(hexafluorophosphate) by a gas-free Belousov-Zhabotinisky (BZ) reaction system containing 1,4-cyclohexanedione (1,4-CHD). The gel membrane was found to be receptive for observing propagating waves since a clearer wave-train is obtained during a long reaction time without any disturbance from the immobilized metal catalyst which can be dissolved into the highly acidic solution of the BZ system. The distinctive waves in the system basically depend on both $BrO_3$ and 1,4-CHD in the initial phase, and are influenced by the intensity of illumination of visible light.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.424.1-424.1
• /
• 2016

태양전지 모듈의 봉지재로 사용되는 EVA(Ethylene-Vinyl acetate)는 외부의 환경으로부터 태양전지를 보호해주는 역할을 한다. 하지만 frame의 실링재나 glass edge 부분의 결함으로 인해 수분이 침투되어 모듈의 내부자재에 영향을 미치게 되며, 모듈의 효율 감소나 수명 단축의 원인이 된다. 이러한 결함을 줄이기 위해서는 EVA의 crosslinking degree, 절연 저항 특성을 향상시키는 것이 중요하다. 이에 본 연구에서는 EVA의 crosslinking degree를 보기 위해 soxhlet extraction method를 이용하여 gel content를 측정하였으며, 라미네이션 과정 중 curing time에 따른 gel content 변화를 확인하였다. 또한 이 실험을 바탕으로 gel content에 따른 절연 저항을 측정하여 EVA의 crosslinking degree에 의한 절연 저항 특성을 확인하였다.

• Archives of Pharmacal Research
• /
• v.25 no.5
• /
• pp.704-708
• /
• 2002

A fast and sensitive protein staining method in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) using both an acidic dye, Coomassie Brilliant Blue R-250 (CBBR) and a basic dye, Neutral Red (NR) is described. It is based on a counter ion-dye staining technique that employs oppositely charged two dyes to form an ion-pair complex. The selective binding of the free dye molecules to proteins in an acidic solution enhances the staining effect of CBBR on protein bands, and also reduces gel background. It is a rapid staining procedure, involving fixing and staining steps with short destaining that are completed in about 1 h. As the result, it showed two to fourfold increase in sensitivity comparing with CBBR staining. The stained protein bands can be visualized at the same time of staining.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.396-399
• /
• 2009

Thin-film transistors (TFTs) with an aluminum indium oxide (AIO) channel layer were fabricated via a simple and low-cost sol-gel process. Effects of annealing temperature and time were investigated for better TFT performance. The sol-gel AIO TFTs were annealed as low as $350^{\circ}C$. They exhibit n-type semiconductor behavior, a mobility higher than 19 $cm^2/V{\cdot}s$ and an onto-off current ratio greater than $10^8$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.768-772
• /
• 1998

The new type polymer electrolyte composed of polymethyl methacrylate(PMMA) - polyethy leneoxide(PEO) contain $LiClO_4$ -EC/PC was developed for the weightless and long or life time of lithium polymer batery system with using polyaniline electrode. the gel type electrolytes were prepared by PMMA with PEO at different lithium salts in the glove box. The minimum thickness of PMMA-PEO gel electrolyte for the slim type is about(400~450$\mu\textrm{m}$. These gel electrolyte showed good compatibility with lithium electrode. The test cell Li/polymer electrolyte/polyaniline solid state cell which was prepared by different lithium salt was researched by electrochemical technique.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.106-109
• /
• 2002

Gel electrophoresis of DNA is a well known technique in molecular biology. This technique is simple, rapid to perform, and capable of adequately separating fragments of DNA. A number of mixtures of DNA fragments ("DNA size markers") are frequently employed in a purpose of extrapolating the sizes or the amount of DNA molecules during gel electrophoresis. DNA size markers are constructed by digesting plasmid DNA, bacteriophage DNA, or recombinant DNA molecules with one or more restriction enzymes. However, liquid suspension containing DNA size marker needs to be kept at a low temperature during storage and shipping. In an attempt to maintain the DNA samples at room temperature for extended period of time, lyophilization of DNA with addition of nuclease inhibitor was studied. Gel loading buffer was also added to the lyophilized DNA to provide additional convenience such that DNA size marker was the "ready-to-use" followed by simply reconstituting with distilled water.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.379-384
• /
• 1997

High quality MCM-41 is prepared from a gel of molar composition SiO2:0.20 CTACl:0.18 TMAOH:25 H2O aged at 20 ℃ for 24 hours before crystallization lasting for 48 hours. The (110) and (200) peaks of XRD pattern of high quality MCM-41 are unusually well resolved and the FWHM (full-width-at-half-maximum) of the (100) peak is 0.13° for as-prepared MCM-41 and 0.21° for calcined one, which indicate well-developed crystals. The properties of the crystal depend on the source and concentration of the reactants and the gel aging time. There is no induction period in the course of the synthesis, which is conveniently monitored by pH measurement. Gel aging, during which a spatial distribution of silicate polyanions and micellar cations is established, is essential for preparing high quality MCM-41. Surfactants with the same cationic organic group but different counteranions change the crystallization behavior. Highly basic gel (pH=12.6) favours the lamellar product; the quality of MCM-41 is lower as insufficient TMAOH is available to dissolve the silica.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.2
• /
• pp.127-136
• /
• 1999

In order to eliminate demerits of conventional dosage forms, dipotassium glycyrrhizate was formulated as a slim mucoadhesive film type dosage form. The mucoadhesive drug layer gel containing dipotassium glycyrrhizate was prepared using $Noveon^{\circledR}$ AA-1, hydroxypropylcellulose-M, ethylcellulose N 100 and citric acid, and the protective layer gel by using ethylcellulose N 100, $Eudragit^{\circledR}$ RS and castor oil. The viscosity of drug layer gel of mucoadhesive film was enhanced as the increased amount of $Noveon^{\circledR}$ AA-1 or hydroxypropyl cellulose-M. The drug content was unifonnly $1160{\pm}14.6\;{\mu}g$, and was varied within 3.5%. The optimum film dosage form showed a good fluidity and malleability of drug layer, with 179 g of thickness, pH 5.7, 411 min of in vitro adhesion time and 172 g in gravity adhesive strength. The release time of drug from the mucoadhesive film was significantly shorter but was delayed when polymers such as ethylcellulose was added. From these results, the new mucoadhesive film may be effective for the treatment of aphthous stomatitis.