• Journal of Microbiology and Biotechnology
• /
• 제16권1호
• /
• pp.25-31
• /
• 2006

Changes of CP4 5-enolpyruvylshikimate-3-phosphate synthase (CP4 EPSPS) in the glyphosate-tolerant Roundup Ready soybean were examined using purified CP4 EPSPS produced in cloned Escherichia coli as a control. CP4 EPSPS in genetically modified soybean was detected by twodimensional gel electrophoresis (2-DE) and identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) and electrospray ionization tandem mass spectrometry (ESI-MS/MS) with databases. CP4 EPSPS in soybean products was resolved on 2-DE by first isoelectric focusing (IEF) based on its characteristic pI of 5.1, followed by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) based on its molecular mass of 47.5 kDa. We quantified various percentages of soybean CP4 EPSPS. The quantitative analysis was performed using a 2D software program on artificial gels with spots varying in Gaussian volumes. These results suggested that 2-DE image analysis could be used for quantitative detection of GM soybean, unlike Western blotting.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권2호
• /
• pp.150-155
• /
• 2001

It has been observed that water, which is absolutely essential for enzyme activity, can induce the agglomeration of enzyme particles in organic media. Although enzyme agglomeration is significant in that it usually reduces enzyme activity and stability, little attention has been paid to the quantitative analysis of enzyme agglomeration behavior in nonaqueous biocatalytic systems. In this study, the effect of water and silica gel on enzyme agglomeration were investigated using Candida rugosa lipase and cyclohexane as a model enzyme and an organic medium. The extent of enzyme agglomeration was quantified by sieve analysis of freeze-dried agglomerates. Increasing the water content of the medium increased the size of the enzyme agglomerates, and it was found that water produced during the esterification reaction could also promote the agglomeration of enzyme particles suspended in organic media. On the other hand, the size of the enzyme agglomerates was remarkably reduced in the presence of silica gel at the same water content. We also show that this increase in the size of enzyme agglomerates results in lower reaction rates in organic solvents.

• 한국세라믹학회지
• /
• 제32권4호
• /
• pp.507-515
• /
• 1995

The monolithic dry gels of the Li2O-Al2O3-TiO2-SiO2 system were prepared by the sol-gel technique using metal alkoxides as starting materials to obtain monolithic glass-ceramics at low temperature without melting. Activation energy for the crystal growth of the gel with 6.05% TiO2, nucleating ageng, for the preparation of Li2O-Al2O3-TiO2-SiO2 system glass-ceramic was 101.14kcal/mol. As a result of the analysis of DTA & XRD, it was confirmed that the crytallization of Li2O-Al2O3-TiO2-SiO2 system glass-ceramic was the most efficient when 6.05% TiO2, nucleating agent, was added. $\beta$-eucryptite solid solution crystals and $\beta$-spodumene solid solution crystals were detected in the sample heat treated above 85$0^{\circ}C$. The sintered gel heat treated at 85$0^{\circ}C$ had the specific surface area of 185$m^2$/g, the pore volume of 0.19cc/g and the average pore radius of 20.8$\AA$. This shows that the sintered gel is also comparatively porous material. In temperature range of 25~85$0^{\circ}C$ thermal expansion coefficient of the specimen which was crystallized for 10hrs at 85$0^{\circ}C$ was 6.7$\times$10-7/$^{\circ}C$, which indicated that the crystallized specimen was turned out to be the glass-ceramic with low thermal expansion.

• 공업화학
• /
• 제10권1호
• /
• pp.160-165
• /
• 1999

Gel 표준 물질의 핵자기 공명적 완화 성질들이 다공성 매체내 유체의 핵자기 공명적 완화 성질들과 잘 부합될 수 있기 때문에, agarose gel은 다공성 매체내 유체의 성질을 측정하기 위한 표준 물질로 사용될 수 있다. 다공성 매체의 세공도(porosity)와 포화도(saturation)를 결정하기 위한 표준물질의 사용을 논의하였고, gel의 핵자기 공명적 성질에 대한 필요조건들도 제시하였다. 2.0 Tesla에서 측정된 agarose gel의 완화시간은 agarose 농도와 상자기성 불순물의 ($CuSO_4$) 농도 함수로 표시하였고, agarose gel 조성과 완화시간 사이의 실험적 결과를 나타내었다. 세공도 분포에 대한 평균값은 17.7%이고, 이 값은 중량 분석법에 의해 계산된 값과 잘 일치한다. 끝으로, agarose gel을 표준 물질로 사용한 비혼화성 2상 유체실험을 수행하였다. 포화 profile들은 균일한 다공성 매체내에서 일차원 치환실험을 했을 때 계산된 결과와 잘 일치하고 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권12호
• /
• pp.1758-1763
• /
• 2004

This study was carried out to investigate gel forming and degradation properties (suwari and modori phenomena) of chicken surimi from mechanically deboned chicken meat (MDCM) at various setting temperatures and time. Chicken surimi was manufactured by a continuous process including chopping of MDCM, washing with 5% NaCl solution or pure water, standing, straining and centrifuging etc. Total process of washing for the MDCM from chopping to centrifuging was repeated over 3 cycles. Gel from prepared surimi were formed at $90^{\circ}C$ for 30 min after various setting treatments. The textural properties of gels were measured at the temperature ranges of low (10$^{\circ}C$), medium (25$^{\circ}C$ and $30^{\circ}C$) and high (45 to 70$^{\circ}C$). The compressive force (CF), hardness and fracturability of surimi gel at 10$^{\circ}C$ increased as setting time increased, and showed the highest value at 30 h of setting time. The CF and hardness of chicken surimi gel at 25$^{\circ}C$ and 30$^{\circ}C$ showed the highest values at 10 h of setting time. Most of gel strengths including CF, and texture profile analysis (TPA) values showed the highest levels in the range 47.5 to 52.5$^{\circ}C$ (p<0.05). The gel strength at 60$^{\circ}C$ increased slightly at 30 min, but then continued to decrease with longer setting times. There was no increase of gel strength at $70^{\circ}C$, but only a continuous decrease over setting time. In conclusion, suwari (gel setting) and modori (gel degradation) phenomena occur during the gel formation of surimi from MDCM. The temperature range in chicken surimi was 47.5 to 52.5$^{\circ}C$ for suwari and 60 to 70$^{\circ}C$ for modori.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.377-382
• /
• 2010

젤 추진제와 유변학적 특성이 유사한 모사 젤 추진제를 물, Carbopol 941, NaOH 농축액을 혼합하여 제작하였고, $Al_2O_3$ 나노 입자를 첨가하여 점도 특성을 비교하였다. 두 가지 모사 추진제의 물성치를 바탕으로 곡관 덕트 내에서의 유동특성을 수치모사하여 해석하였고 덕트에 Dean vortices가 발생하는 임계 Dean 수를 도출하였다. 젤-나노 추진제의 경우 비록 높은 겉보기 점성계수를 가지나 젤 추진제와 비교시 같은 범위의 임계 Dean 수가 도출되었다. 이는 Fellouah et al.[1]이 제시한 바와 같이 비슷한 값의 Power law 지수에 기인하는 것으로 판단된다.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.447-452
• /
• 1987

${\alpha}$-Al2O3 powder was produced at 1000$^{\circ}C$ by the boehmite sol-gel process with seeding 2 wt% ${\alpha}$-Al2O3. The processes and mechanisms of fornation of ${\alpha}$-Al2O3 was investigated using DTA/TG, XRD, TR spectroscopy and thermodynamic analysis. The specific surface area of the obtained ${\alpha}$-Al2O3 was 16.3㎡/g.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제39차 학술발표회
• /
• pp.11-12
• /
• 2008

Poly(ethylene oxide)(PEO) of molecular weight of 300,000 was crosslinked by UV irradiation in the presence of crosslinker. The photochemical crosslinking of PEO was enhanced by the addition of dimethacrylate crosslinkers in the film. Percent conversion of the polymer into gel as well as water absorbency were investigated gravimetrically. Gel fraction of PEO films increased with increasing crosslinker concentration. In the case of photocrosslinked PEO films with benzophenone, gel fraction reached about 95%. The thermal behavior of crosslinked PEO films was characterized by thermogravimetric analysis. The maximum decomposition temperature increased with increasing crosslinker concentration.

• 한국정보통신학회논문지
• /
• 제9권7호
• /
• pp.1491-1496
• /
• 2005

[ $Pb_{0.72}La_{0.28}TiO_3$ ] (PLT(28)) 박막을 sol-gel 법을 이용하여 제작한 후, 그 특성을 조사하여 ULSI DRAM 의 캐패시터 절연막으로서의 적용 가능성을 연구하였다. Sol-gel 법의 출발 물질로는 acetate 계를 사용하였다. TGA-DTA 분석을 통하여 PLT(28) 박막의 sol-gel 법에 의한 공정 조건을 확립하였다. 매 coating 후 $350^{\circ}C$ 에서 drying 하고, 마지막으로 $650^{\circ}C$ 에서 annealing 하여 $100\%$ perovskite 구조를 가지는 치밀하고 crack 이 없는 PLT(28) 박막을 얻었다. $Pt/Ti/SiO_2/Si$ 기판 위에 PLT(28) 박막을 형성하여 전기적 특성을 측정하였다. 그 결과 유전 상수와 누설전류밀도가 각각 936 과 $1.1{\mu}A/cm^2$ 으로 측정되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.865-868
• /
• 2005

$Pb_{0.72}La_{0.28}TiO_3$ (PLT(28)) 박막을 sol-gel 법을 이용하여 제작한 후, 그 특성을 조사하여 ULSI DRAM 의 캐패시터 절연막으로서의 적용 가능성을 연구하였다. Sol-gel 법의 출발 물질로는 acetate계를 사용하였다. TGA-DTA 분석을 통하여 PLT(28) 박막의 sol-gel 법에 의한 공정 조건을 확립하였다. 매 coating 후 350$^{\circ}C$에서 drying 하고, 마지막으로 650$^{\circ}C$에서 annealing 하여 100% perovskite 구조를 가지는 치밀하고 crack 이 없는 PLT(28) 박막을 얻었다. Pt/Ti/SiO$_2$/Si 기판 위에 PLT(28) 박막을 형성하여 전기적 특성을 측정하였다. 그 결과 유전 상수와 누설전류밀도가 각각 936 과 1.1${\mu}$A/cm$^2$ 으로 측정되었다.