• 농업과학연구
• /
• 제43권3호
• /
• pp.441-449
• /
• 2016

Agricultural tractors are designed using the empirical method due to the difficulty of measuring precise load cycles under various working conditions and soil types. Especially, directly drives various tractor implements, the power take off (PTO) gear. Therefore, alternative design methods using gear design software are needed for the optimal design of tractors. The objective of this study is to simulate fatigue life of the PTO gear according to the operating point of the tractor engine. The PTO gear was made with SCr415 alloy steel with carburizing and quenching treatments. The fatigue life of the PTO gear was simulated by using bending and contact stress according to the torque of the load levels. The PTO gear simulation was conducted by the KISSsoft commercial software for gear analysis. Bending and contact stress were calculated by the ISO 6336:2006 Method A and B. The simulation of fatigue life was calculated by the Miner's cumulative damage law. The total fatigue life of tractors can be estimated to 3,420 hours; thus, 3,420 hours of fatigue life were used in the simulation of the PTO gear of tractors. The main simulation results showed that the maximum fatigue life of the PTO gear was infinite fatigue life at maximum engine power. Minimum fatigue life of the PTO gear was 19.61 hours at 70% of the maximum engine power. Fatigue life of the PTO gear changed according to load of tractor. Therefore, tractor work data is needed for optimal design of the PTO gear.

• 수산경영론집
• /
• 제33권1호
• /
• pp.87-107
• /
• 2002

The sea of north-east Asia is biologically interrelated and one country's mishap in the management of fisheries could have a critical effect upon the other. Accordingly under the TAC system adopted by all the countries of Korea, Japan and China, the mismanagement o( trans-boundary fish stocks under the provisional fisheries agreement prior to the delimitation of EEZ could lead to the irrevocable depletion of fisheries resources in case of absence of close cooperation among the countries concerned. To tackle the problems above, it is necessary, from a short term perspective, to promote the combined efforts to do researches on fisheries resources, find ways to improve the transparency of fisheries management, adjust the fisheries management regulations of each country, standardize fishing gears and methods, and exchange fisheries-related statistics and data for socio-economic analysis and strengthen joint research activities for the mutual benefits. From a longer term prospective, regional fisheries organization need to be set up to oversee the whole area of north-east Asian sea. The organization as such could play a role in adjusting the conflicting interests of Korea, Japan and China, and efficiently manage the fisheries resources, which is complex and challenging in nature. In addition, unlike China, the historical fisheries relationship between Korea and Japan, spirit of reciprocity and the Article 62 of the United Nations Convention On the Law Of Sea need to be taken into account when seeking for fisheries cooperation between the two countries through the international specialization. In other words, the data obtained through the joint researches on the fisheries resources for the specific ocean along with such factors as capital, labor, fisheries technology and consumption of fish products could be used to assign the specific sector of fisheries to the country who has a comparative advantage, thus achieving the mutually benefiting results Up to the present, concerted efforts by Korea, Japan and China on the fisheries cooperation have been consistently made, but the results have yet to be materialized, It is also beyond doubt that governmental consultations among the countries should be made on a consistent basis, but non-governmental organizations' exchanges and related joint researches will more likely help bring about the desired fruition in a shorter time.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.142-151
• /
• 2013

This study develops an automation system for metallic mold design that is applicable in forging non-axial symmetric parts. The metallic mold design program is used to design the metallic mold using two-dimensional axial symmetric metallic molds and to predict the stress concentration using finite element analyses. Then, the program redesigns the metallic mold using variables such as the optimal split diameter, maximum allowable inner pressure, fit tolerance, and stress distribution, which are calculated using the metallic mold design program. When the involute spur gear is forged, stress concentration occurs on the tooth root bounded at the symmetric surface. The SCM4 material is suitable for metallic molds because the stress is less than the yield strength of the insert and it acts on the tooth root regardless of the inner pressure. The metallic mold for forging non-axial symmetric parts can be designed through adjusting the magnitude of the contact pressure. The program developed in this study can be applied to metallic mold designs in involute spur gears of forging, which is an ordinary non-axial symmetric part.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.69-74
• /
• 2017

In the current machining industry, machining precision is necessary and machining is being carried out. In this ultra-precision machining industry, the fixation of the workpiece is very important and the degree of machining depends on the degree of fixation of the workpiece. In ultra-precision machining, various methods, such as using a vise chuck or the like and using bolt nut coupling, are used for fixing a workpiece to an existing machine tool. In particular, when the precision gripping force of the jig is insufficient during machining of the ultra-precision mold parts, the machining material shakes due to the vibration or friction, and the machining precision is lowered. In the ultra-precision machining of power transmission parts, such as gears, the accuracy of the product is then determined. In addition, the amount of heat generated during machining has a significant effect on the machining accuracy. This is because the vibration value changes according to the grasp force of the jig that fixes the workpiece, and the change in the calorific value due to the change in the main shaft rotation speed of the ultra-precision machining. The increase in the spindle rotation speed during machining decreased the heat generation during machining, and the machining accuracy was also good, and it was confirmed that the machining heat changed according to the fixed state of the workpiece and the machining accuracy also changed. In this study, we try to optimize the driving part of the power vise by using structural analysis, rather than the power vise, using the basic mechanical-type power unit.

• 대한전자공학회논문지TE
• /
• 제39권2호
• /
• pp.118-123
• /
• 2002

토크 전달시스템은 다수의 기어와 커플링이 유연하게 구성되어 있으므로, 모터의 속도가 갑자기 변할 때 비틀림 진동이 발생한다. 따라서 모터의 정확한 응답 특성을 얻기 위해서는 반드시 이 진동을 억제시켜야 한다. 이와 같이 진동억제는 모터제어에 있어서 매우 중요하다. 진동억제를 위해, 특히 2관성 시스템의 제어를 위해 다양한 제어방법들이 소개되었다. 토크의 비틀림 현상으로 인해 발생하는 진동을 억제하기 위해 토크의 비틀림 성분을 궤환시켜 외란 관측기 및 필터를 사용하여 진동을 억제하는 방법이 소개되었고, 이 방법은 CDM으로 적절한 비례 제어기와 필터의 계수 값을 설계하여 진동을 억제하는 방법이다. 그러나 CDM을 이용하여 설계된 제어기는 외란이 인가될 경우에 적응성이 떨어짐을 알 수 있다. 따라서 본 논문에서는 이러한 문제를 해결하기 위하여 퍼지를 사용하여 제어기의 파라메터 $K_P$를 자동적으로 추종하는 자동추정 퍼지제어기를 제안하고 이 제어기의 성능을 시뮬레이션을 통해 검증하였다.

• 항공우주산업기술동향
• /
• 제9권1호
• /
• pp.119-129
• /
• 2011

달착륙선이 주어진 임무를 수행하기 위해서는 달궤도 진입 후 성공적인 착륙이 보장되어야 한다. 착륙환경에서 발생되는 높은 충격하중 하에서 착륙선 본체 및 탑재체의 파손을 막기 위해서는 높은 충격흡수율 및 자세 안정성이 요구된다. 따라서 착륙 시 발생하는 충격을 효과적으로 흡수하면서 기체의 전복 및 쓰러짐을 막을 수 있는 착륙장치는 달착륙선의 핵심 구성요소이다. 본 논문에서는 현재까지 달착륙에 성공한 달착륙선과 현재 개발단계에 있는 달착륙선을 대상으로 다양한 착륙장치 설계안들을 검토 및 비교하였으며, 현재 진행되고 있는 한국형 달탐사선 예비설계요구조건에 부합하는 착륙장치의 요구조건 및 이를 충족시킬 수 있는 착륙장치 설계에 대한 예를 제시하고자 한다.

• 대한한의진단학회지
• /
• 제16권3호
• /
• pp.41-48
• /
• 2012

Objectives: The aims of this study are to design a optimized mechanical structure of digital tongue imaging system (DTIS) equipped with LEDs in aspects of object distance and camera angle of coverage. Methods and Results: We tried to find optimized object distance while recording a rectangular object of common tongue size. In case object distance is 22 cm or less, edge of the rectangle was not taken beyond the shooting range. In contrast, if object distance is 40 cm or more, the rectangle image was too small. Therefore when considering the variation of subjects, we selected distance of 35-40 cm as appropriate object distance for the DTIS. We also tried to find optimized angle between camera view axis and horizontal line. We photographed from the side of the face of 7 adults with exposed tongue. We drew an exposed tongue lines to connect the tongue tip points and the tongue root points by using the photos acquired from the side faces. And then we calculated the tongue exposure angles between the vertical line and the exposed tongue lines. Mean tongue exposure angle was $28.3^{\circ}$ when tongue was lightly exposed and $13.3^{\circ}$ when maximally. So we determined $73^{\circ}$ as appropriate slope angle of part in contact with face of the DTIS and by considering that the standard variation was great, we designed control gears to adjust the slope of the camera view axis and to regulate the object distance. Conclusions: We designed a optimized mechanical structure in object distance and slope angle of part in contact with face of the DTIS.

• Journal of Biosystems Engineering
• /
• 제26권5호
• /
• pp.423-430
• /
• 2001

The purpose of this study is to develop high-speed rotary tillage system for a power tiller by improving the rotary blade and the power train of transmission. Mechanical structure of gear train of rotary drive of conventional power tiller was simplified so that power can be transmitted directly from second shaft to tilling speed change shaft by rotating freely the transfer gear which changes the direction of rotation of shafts using needle bearing installed into middle shaft. A new gear train suitable for the single-edged rotary blade and high-speed rotary drive was developed with the rotational speed of rotary shaft faster than 7.5% at 1st-speed and 1.4% at 2nd-speed the one of conventional system by changing the numbers of teeth of gears of middle shaft, tilling speed change shaft and PTO shaft. Using the developed gear train for high-speed rotary drive, field tests were performed to compare tillage performances by the developed single-edged blade and by the conventional double-edged blade. The results showed that the performances by the single-edged blade compared with the one by the double-edged blade was improved about 18% in field capacity, about 34% in fuel consumption, and 9.4% in soil crushing ratio. Therefore, it may be concluded that tillage performance by the single-edged blade was improved compared to the one by the conventional blade. Evaluation of the developed system consisting of single-edged blade and gear train for high-speed rotary drive in field revealed that tillage performance of the developed system was similar to the one of field test conducted using the system consisting of single-edged blade and gear train for rotary drive of conventional power tiller However, considering the higher cone index of the upland field where evaluation was carried out compare to the one of the ordinary paddy field, it may be concluded that tillage performance of the developed rotary tilling system better than the one of conventional system.

• 한국항공우주학회지
• /
• 제37권2호
• /
• pp.193-200
• /
• 2009

본 논문에서는 소형항공기용 유-공압 방식(oleo pneumatic type) 착륙장치의 낙하특성을 연구하였다. 본 연구대상의 착륙장치의 방식은 미터링 핀이 없는 단순 유-공압 방식댐퍼 이다. 일반적으로 유-공압 방식의 착륙장치는 단순한 구조로 되어 있어 무게가 가볍고 좋은 충격흡수 효율을 가진다. 낙하해석을 위하여 상용 코드인 MSC ADAMS를 이용하여 모델링 하였다. 모델링한 후에 해석과 시험결과의 상사성을 검증하기 위하여 일련의 시험이 수행되었다. 시험과 해석결과의 보다 좋은 일치성을 얻기 위하여 해석 모델에 공동현상 효과가 고려되었다. 공동현상을 고려한 착륙장치의 동적 거동 시뮬레이션 결과들이 현저하게 개선되었으며 시험결과와 보다 잘 일치함을 확인하였다. 이러한 과정을 통해 신뢰성이 검증된 해석모델을 이용하여 경사면에 대해서 해석적 방법을 통해 낙하특성을 예측하였다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제26권1호
• /
• pp.73-84
• /
• 2020

Purpose: Though Korean healthcare services have been upgraded, infection and fire had been broken out in general hospitals. And higher concerns about quality assessment made it to clinical laboratory design guideline studies. So, this study investigates the facilities, equipment and personnel of laboratory medicine focusing on more than five hundred fifty bed hospital, and contributes to make guidelines for safety and efficiency in lab. Methods: Questionnaires to supervisor technologist and field surveys to medical laboratories in korean hospitals have been conducted for the data collection. 16 answers have been analysed statistically by MS Excel program. Results: Most of the sample tests such as hematology, clinical chemistry, immunology, transfusion, urinalysis, microbiology and molecular diagnosis are performed by more than 80% in large sized general hospital laboratory. In the test methods, automatic analyzers are used up to 80%, total laboratory automation up to 43% in clinical chemistry and immunology, and manual tests in all sorts of the test. There are placed in single lab or two and three labs above the ground, which are all in semi-open lab. There is some correlation with the number of specimens and the number of lab people depending on the number of hospital beds. Laboratory environment shows that work distance is good, but evacuation path width, visibility, separation of staff area from automatic analyzer, and equipment installations are needed to have more spaces and gears. Most of the infection controls are equipped with mechanical ventilation, air-conditioning, washbasin and wastewater separation, BSC installation and negative pressure lab room. Implications: Although the laboratory space area is calculated considering the number of hospital beds, type of tests and number of staff, hospital's expertise and the samples numbers per year should be taken into account in the planning of the hospital.