Journal of the Korea Institute of Building Construction
/
v.11
no.3
/
pp.229-237
/
2011
The pullout test is a nondestructive testing method certified by the American Society for Testing and Materials (ASTM) and British Standards (BS). Research has shown that it is very reliable in terms of evaluating the concrete strength of reinforced concrete members. However, the pullout test is rarely performed on domestic construction sites due to the complex procedures and high costs involved. This study proposes a new pullout test composed of a post installable break-off bolt, an insert nut, and a pullout tester, which satisfy both economical and practical purposes on a construction site. Three different types of special fastening methods, a temporary fixed bolt, a plastic fixed panel, and a fixed bar, have been developed. A pullout tester is proposed that is driven by the circle force introduced into a handle composed of eight gears without a load cell and a hydraulic cylinder. The serviceability and reliability of these instruments were investigated through experiments at construction sites. Furthermore, the sample pullout test with a wall specimen was conducted to estimate the usefulness of the temporary fixed bolt type of fastening methods and pullout devices. Eventually, the developed instruments will be useful on construction sites if minor requirements are met.
Journal of the Korean Society for Precision Engineering
/
v.17
no.10
/
pp.192-199
/
2000
The design of multi-stage gear drives is a time-consuming process because it includes more complicated problems, which are not considered in the design of single-stage gear drives. The designer has no determine the number of reduction stages and the gear ratios of each reduction stage. In addition, the design problems include not only dimensional design but also configuration design of gear drive elements. There is no definite rule or principle for these types of design problems. Thus the design practices largely depend on the sense and the experiences of the designer, and consequently result in undesirable design solution. A new and generalized design algorithm has been proposed to support the designer at the preliminary phase of the design of multi-stage gear drives. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. The algorithm consists of four steps. In the first step, the user determines the number of reduction stages. In the second step, gear ratios of every stage are chosen using the random search method. The values of the basic design parameters of a gear are chose in the third step by using the generate and test method. Then the values of the dimensions, such as pitch diameter, outer diameter and face width, are calculated for the configuration design in the next step. The strength and durability of each gear is guaranteed by the bending strength and the pitting resistance rating practices by using AGMA rating formulas. In the final step, the configuration design is carried out using simulated annealing algorithm. The positions of gears and shafts are determined to minimize the geometrical volume (size) of a gearbox while avoiding interferences between them. These steps are carried out iteratively until a desirable solution is acquired. The proposed design algorithm is applied to the preliminary design of four-stage gear drives in order to validate the availability. The design solution has considerably good results in both aspects of the dimensional and the configuration design.
Purpose: Bicycle riding is an increasingly popular sports and leisure activity in Korea. The aim of this study was to identify injury patterns of admitted patients who were injured from bicycle riding. Materials and Methods: This study examined 71 patients from Jan. 2008 to May 2009. There were 54 male and 17 female patients. We investigated the injured body parts, mechanisms of injury, location of injury, types of bicycles, purpose of bicycle riding, any concomitant luggage or passenger on rear seat, injury seasons and the helmet use. We analyzed the data using Injury Severity Score(ISS). Results: There were 11 cases of ISS 1, 41 cases of ISS 4, 2 cases of ISS 5, 13 cases of ISS 9, one case of ISS 13, two cases of ISS 16 and one case of ISS 29 among the 71 patients. 36 patients(50.7%) underwent surgery for upper and lower extremity injuries, two patients for vertebral body fractures, 8 patients for facial bone injuries and one patient for abdominal organ injury. There were 10 head injuries among whom three patients received treatment in ICU(4.2%). Conclusion: Bicycle riding can cause severe injuries with subsequent admission and major surgeries. Several measures including constructing more bicycle road, public campaign and wearing protective gears should be instituted.
Transactions of the Korean Society for Noise and Vibration Engineering
/
v.24
no.9
/
pp.667-674
/
2014
A ship's propulsion shafting system is subjected to varying magnitudes of intermittent loadings that pose great risks such as failure. Consequently, the dynamic characteristic of a propulsion shafting system must be designed to withstand the resonance that occurs during operation. This resonance results from hydrodynamic interaction between the propeller and fluid. For ice-class vessels, this interaction takes place between the propeller and ice. Producing load- and resonance-induced stresses, the propeller-ice interaction is the primary source of excitation, making it a major focus in the design requirements of propulsion shafting systems. This paper examines the transient torsional vibration response of the propulsion shafting system of an ice-class research vessel. The propulsion train is composed of an electric motor, flexible coupling, spherical gears, and a propeller configuration. In this paper, the theoretical analysis of transient torsional vibration and propeller-ice interaction loading is first discussed, followed by an explanation of the actual transient torsional vibration measurements. Measurement data for the analysis were compared with an applied estimation factor for the propulsion shafting design torque limit, and they were evaluated using an existing international standard. Addressing the transient torsional vibration of a propulsion shafting system with an electric motor, this paper also illustrates the influence of flexible coupling stiffness design on resulting resonance. Lastly, the paper concludes with a proposal to further study the existence of negative torque on a gear train and its overall effect on propulsion shafting systems.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.41
no.1
/
pp.27-34
/
2005
This study was conducted to examine the mesh selecivity and optimum mesh size of spring frame trap for conger eel. Conger myriaster. It was carried out on 25th Sep. 2002 at the coastal sea of Nung-po, Geojedo. The experimental fishing gear was used in five kinds of different mesh size spring frame trap that were 15mm, 20mm, 25mm, 30mm and 35mm, and one plastic pot as control fishing gear that was 6.7mm hole diameter. The mesh size 15mm, 20mm are the current gears, 25mm, 30mm are used in experiment, and 35mm is the legal mesh. These were made 50 traps, respectively. The mesh selectivity curve was analysed by the Kitahara's method(1968) and the optimum mesh size was estimated by relationship between the total length and diameter of conger eel and by the mesh selectivity master curve. The results obtained are summarized follows : 1. The total number of catch by the trap for conger eel was 835, it was consisted of 537 conger eel(64.4), 225 crabs(2639%) and 73 others(8.7%). 2. The value of maximum 1/m on the mesh selectivity curve was estimated at about 23.9. 3. The optimum mesh size of spring frame trap for conger eel was estimated 34.0mm in 50% selection range of the mesh selectivity master curve.
Kim, Seon-Jin;Kim, Sung-Gon;Kang, Tae-Woo;Shin, Cheol-Ho
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.10
/
pp.401-409
/
2018
This paper presents means of reducing noise in NSD using path control methods for Light Tactical Vehicles (LTV). NSD is applied to the rear axle of LTVs for enhancing mobility. NSD can improve mobility of vehicles with a high locking ratio but causes noise under certain conditions due to its mechanical structure. This noise results from contact between gears due to the differential role of NSD. The noise affects users, so users have continually requested noise reductions. Though the noise doesn't affect product performance and durability, and satisfies the National Defense's noise condition standards, users request for noise reduction is the focus of this research. Eliminating the source of sound for LTVs is realistically limited, so this research applies a path control method to reduce noise by controlling the path which transmits the noise. This study improves the structural delivery system and examines methods of reducing noise in LTV systems.
Kim, Doo Nam;Sohn, Hawsun;An, Yong-Rock;Park, Kyum Joon;Kim, Hyun Woo;Ahn, So Eon;An, Du Hae
Korean Journal of Fisheries and Aquatic Sciences
/
v.46
no.6
/
pp.892-900
/
2013
In 2011, the system for conserving and managing cetacean resources in Korea changed. The status of the cetacean bycatch was analyzed using a distribution certificate that was issued by the coast guard. During 2011.2012, 12 species were bycatch in Korean waters: three species of baleen whale and nine species of dolphin. The finless porpoise (Neophocaena phocaenoides) was the dominant species, followed by the common dolphin (Delphinus delphis), harbor porpoise (Phocoena phocoena), and Pacific white-sided dolphin (Lagenorhynchus obliquidens). Among the baleen whales, the common minke whale (Balaenoptera bonaerensis) was first and Bryde's (Balaenoptera edeni) and humpback (Megaptera novaeangliae) whales appeared in the Korea Strait and East Sea, respectively. Among the dolphins, the finless porpoise ranked first in the Yellow Sea. The common dolphin, Pacific white-sided dolphin, and harbor porpoise were more frequent in the East Sea than in other waters. The cetacean bycatch was caused mainly by pots, set nets, gill nets, and stow nets. Among the three species of baleen whale, the common minke whale was caught by pots and set nets, and comprised over 68.9% of the total bycatch in 2011 and 56.2% in 2012. Comparing the bycatch caused by fishing gears by area in 2011 and 2012, 97.9% and 99.6%, respectively, of the finless porpoise bycatch in the Yellow Sea was by stow nets. In the Korea Strait, trawl bycatch comprised 67.3% in 2011 and 73.0% in 2012, followed by gill nets, set nets, and pots targeting finless porpoise and common minke whales. In the East Sea, gill nets were responsible for 46.7% in 2011 and 61.2% in 2012, followed by set nets and pots.
Many studies to cope with the present problems of Korean coastal and offshore fisheries has been performed, but these were done partly in necessities and general studies for Korean inshore and offshore fisheries are in early stage. Most of these studies adopted analytical way of approach for each fishery individually and they could not reflect the effect of correlated interaction among fisheries on the several common species/stocks, and thus optimal effort allocation was impossible. To consider general fisheries and optimal effort allocation among competing mixed species, a linear programming (LP) approach is applied in this study and introduced into 16 important inshore and offshore fisheries with 13 constraining species which were chosen by annual yield order. This study is not based on the biological interaction among species (i.e., prey - predator system) but the technological interaction between species and fishing efforts. For the application of LP model in these fisheries, the standardization of fishing efforts through different fishing gears could not be successful and a new way of effort standardization through CPUE for vessel tonnage was originated. Total standardized fishing effort on a particular species i, Ei, is computed as the linear summation of standardized fishing effort generated by each fishery j. That is, (equation omitted) where $f_{j}$ is the total vessel tonnage of fishery j and aij is the coefficients contributing to the standardized fishing effort per ton for species i taken in fishery j. The total fishing effort level on species i due to both directed fishing and by - catch can thus be accounted in the aij's. Optimal effort allocation among the j fisheries may be considered a minimizing problem (minimize $\Sigma$$f_{j}$), subject to the constraints that standardized fishing effort levels on particular species are maintained at, above, and below certain predefined levels. Fishing effort goals for individual species can be based on various biological and/or economic criteria, i.e., fishing effort level generating maximum sustainable yield and/or maximum economic yield. But in this study the $F_{0.1}$ criteria which was accepted as an approximate level for $F_{mey}$ by Outland and Boerema's (1973) study. The findings of this study are, (1) LP model can be applied to the Korean inshore and offshore fisheries giobally. (2) Through a new way of combining multiple different fisheries' efforts for a particular species together generating standardized fishing effort, Schaefer curve could be applied to the complex system successfully. (3) The results of this study for total reduction scale were mostly the same as those of prior studies, but different much from the individual scales of reduction. This study showed the necessities for exploitation of more concrete parameters to put into consideration of profitability of fisheries and social factors, and this model can be modified according to the actual constraints. Also, considering the age structure of stocks, this model can be developed into better one for better fisheries management.ent.
RARK Sing Won;LEE Byoung Gee;SU Young Tae;SON Boo Il;KIM Moo Sang
Korean Journal of Fisheries and Aquatic Sciences
/
v.5
no.2
/
pp.63-67
/
1972
Preliminary creel-holding test of live anchovies which are to be used as bait for the skipjact fishery, was conducted on the fish caught by set net and lift net. They were held in the creels constructed with bamboo frame and minnow netting, during the period of Oct. 24-Nov. 28 in 1972. If was found that the survival rate of the creel-held anchovies varied by the size of fish, the towed distance and speed of fish-carrying creel in which the fish were accomodated after catchi. 1. The survival rate of the medium size anchovies, 7.8-9.6cm in length and 4.6-4.8 g in weight, was $70-92\%$ during the holding period of 20-35 days. Whereas, only $16\%$ of juvenile anchovies, 5.3cm in length and 1.0 g in weight, were survived for 19 hours after catch. 2. During the time of transport, the farther and faster the creel containing fish were towed, the less fish were survived in the subsequent holding period. 3. Though both the set net and lift net could be fairly used to catch live anchovy, no decision between these two gears could be made in this experiment to determine the superiorness for the subsequent survival rate.
Journal of the Korean Society of Marine Environment & Safety
/
v.22
no.5
/
pp.389-401
/
2016
This study attempted to present the monthly distribution of the inshore gill netters for the prevention of propeller failure caused by the damage of fishing gear by the merchant vessels in the West Sea. This study was conducted using the transmitting device of fishing location (V-Pass) data for 1 year in 2014. The grid intervals are $30minute{\times}30minute$ ($latitude{\times}longitude$) based on the section of the sea. A total of 56 sections were analyzed by constructing a grid. The results revealed that the section no. 194 with the highest density index showed no fishing gear damage accident. But the section no. 193 with a relatively lower density index showed more frequent fishing gear damage accident. It is because the section no. 193 is included in the main route of the merchant vessels. Based on this analysis, it is found that the fishing gears are not damaged in proportion to density index but risk of damage exists according to the main routes of merchant vessels. Therefore, for the safe navigation of the merchant vessels, notifying the waters of $34.5^{\circ}{\sim}35.5^{\circ}$ at latitude and $125.67^{\circ}{\sim}126^{\circ}$ at longitude, as a navigational warning area from May through September, will prevent marine accident, such as propeller failure and fishing gear damage. Accordingly, when the merchant vessels navigate in the section no. 193 and 203, the area of $34.5^{\circ}{\sim}35.5^{\circ}$ at latitude and $125.5^{\circ}{\sim}125.67^{\circ}$ at longitude is recommended for the safe navigation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.