• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.122-131
• /
• 1992

An expert system is developed which can design the power transmission involute cylindrical gears on the basis of strength and durability. Bending strength, surface durability, scoring, and wear probability are considered as the basis. The basic components of the expert system are knowledge base, inference engine, and working memory. The knowledges in knowledge base are classified hierarchically into the knowledges used in selection of gear type, selection of materials, and determination of K factor and are represented by rules. In the inference engine two inference methods are implemented with the depth first search method. For-ward chaining method is introduced in the selection of gear type and materials and in the determination of K factor. Backward chaining method is introduced in the detailed design of module and face width in accordance with the validation of strength. And inference efficiency is achieved by constructing the part needing a lot of numerical calculations in strength estimation separately from inference mechanism. The working memory is established to save the results during inference temporarily. In addition, design database of past design results is built for consultation during design and knowledge acquisition facility, explanation facility, and user interface are included for the usefulness of user. This expert system is written with the PROLOG programming language and the FORTRAN language in numerical calculation part which interfaced with PROLOG and can also be executed on IBM-PC compatible computer operated by MS-DOS alone.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.1
• /
• pp.1-11
• /
• 2017

Fishing pots are one of the important fishing gears in our coastal and offshore fisheries. In terms of a sustainable use of marine resources, there are concerns about the ghost fishing by lost pots. It is reported that 10 to 70% of the pots are abandoned or lost annually. This study is to compare the catching efficiency of drum type whelk pots that are made of biodegradable nets to those made of the ordinary nets, in the eastern coast of Korea. Five types of drum pots were used with combination of biodegradable nets and ordinary (PA, PE) nets applied to the main and funnel parts of the pots: pots with biodegradable nets (Bio+Bio); pots with PE net (PE+PE); pots with body and funnel made of biodegradable nets and PE nets respectively (Bio+PE); pots with body and funnel made of PE nets and PA nets respectively (PE+PA); pots with body and funnel made of PE nets and biodegradable net respectively (PE+Bio). Field experiments were conducted from June $18^{th}$, 2015 to August $7^{th}$, 2015 using a commercial fishing vessel in the Uljin waters on the eastern coast of Korea. Two fleets of pots with one hundred in each, 20 pots of each type, were casted for 8 to 15 days to analyze their catching efficiency. The catch of target species, whelks, was 202,563.0 g with catch rate of 38.7% of the total catch, while the bycatch was 320,709.7 g with the rate of 61.3% of the total catch. The catch of whelks was the highest in the Bio+PE pots (46,020.3 g), followed by the Bio+Bio pots (42,027.5 g), the PE+Bio pots (41,849.9 g) and the lowest being PE+PE pots (38,054.2 g). Compared to the conventional pots, the pots with biodegradable nets on the body or entrance part had slightly higher catch rate for both the target species and the bycatch. The PE+PE had the lowest catch rate. There is no significant difference in catch between the pots with biodegradable nets and the ordinary nets for the target species such as Buccinum opisthoplectum, Neptunea eulimata, Buccinum striatissimum. Consequently, using biodegradable nets for the conventional whelk pots can reduce ghost fishing by lost gears while keeping the performance of the pots.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.3
• /
• pp.166-172
• /
• 1997

In order to exterminate effectively starfish, Asterias amurensis inhabited a village fishing grounds and shellfish farms on coast of Korea, Mop and sledge gear were made and sea trials for capture efficiency of starfish by each gear and towing distance were carried out by commercial dredger on the coast of Keojedo from April to May in 1995. As Starfish mop and sledge were slowly dragged over the bottom at the same time, starfish became entangled in bunches of twine and netting respectively. The gears were hauled up at intervals to remove the starfish and hand-picking operations on vessel were conducted. The results obtained are as follows : Two gears were smoothly slidden over the sea bottom and captured numerous starfish. The optimal towing distance by each gear was 300 to 500 m.The capture efficiency of starfish species by sledge was 57% compared with 43% of that by mop but mixed rate with fish or shellfish of the former was 21 times as high as that of the letter. It was concluded from sea trials that moping was effective in shellfish farms, because the mop outfit causes little damage to useful shellfishes and the mixture of starfish with fish or shellfish was low, whereas sledging can be used to clean uncultivated areas free of shellfish where starfish population is very heavy and common fishing grounds in which bottom material is rock or gravel.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.2
• /
• pp.128-136
• /
• 2012

Hybrid surveys using hydroacoustic and fish sampling gears such as trammel net, trap were conducted to investigate total biomass, distribution and dominant fish species of the demersal fishes in the marine ranching area (MRA) of Jeju. Four surveys were carried out in June, August, October and November using 38kHz quantitative echo sounder. Catch data using trammel net and trap were used to calculate biomass and to examine dominant fish species. Fish schools were mainly detected in the waters of 20 meters below and around Chagwido waters. By the result of fishing experiments, fish species living in MRA of Jeju were about 40 species, dominant fish species of a detectable fish such as Family Sparidae and Family Monacanthidae etc. were identified 59.4~68.8% of total biomass. Based on the hydroacoustic data, fish length-weight function and target strength information, mean density of the demersal fish estimated were as follows; 0.88g/$m^2$ on June, 1.12g/$m^2$ on August, 1.35g/$m^2$ on October and 1.18g/$m^2$ on November. An estimated average biomass in MRA of Jeju was founded 20.5 tons in 2007, 20.6 tons in 2008, 23.0 tons in 2009, 25.9 tons in 2010. The results showed that biomass of MRA is getting increased slowly. Therefore the hybrid survey method using hydroacoustic and fish sampling gears is assured an effective biomass survey in the waters of mixed species.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.220-226
• /
• 2005

This study evaluated the composition and distribution of marine litters on the sea-bed of the East China Sea. Surveys have been conducted by a benthic trawlnet of Dong-baek training ship of Yosu national university during the cruise of 2002-2004. Distribution density showed high value in C5 (north-western area of Jeju Island) with $110.3kg/km^2$ and those of annual mean were about $31-43kg/km^2$. Fishing gears such as nets, pots, octopus jars and etc. were about 42-72% of debris collected in the East China Sea. Composition ratio of rubber, vinyl. metal, plastic, glass, wood, cloth and etc. were within 25% except C5. Rope and drum showed strong fluctuations with 0-30% according to the trawling sites. Some vinyls and nets made in Korea, China and Japan were much collected. It is estimated that fishing gears were discarded to the sea by fishing operation, deliberately or not. An comprehensive program including continuous research, monitoring for marine litters in the Korean sea were necessary.

• Ocean and Polar Research
• /
• v.40 no.4
• /
• pp.237-247
• /
• 2018

This study aims to estimate optimal harvests, fishing efforts, and stock levels of hairtail harvested by the large pair bottom trawl, the large otter trawl, the large purse seine, the offshore long line, and the offshore angling fisheries by using the surplus production models and the current value Hamiltonian method. Processes of this study are as follows. First of all, this study estimates the standardized fishing efforts regarding the harvesting of the hairtail by the above five fishing gears based on the general linear model developed by Gavaris. Secondly, this study estimates environmental carrying capacity (k), intrinsic growth rate (r), and catchability coefficient (q) by applying the Clarke Yoshimoto Pooley (CY&P) model among various surplus production models. Thirdly, this study estimates the optimal harvests, fishing efforts, and stock levels regarding the hairtail by the current value Hamiltonian method, including the average landing price, the average unit cost, and the social discount rate. Finally, this study attempts a sensitivity analysis to figure out changes in optimal harvests, fishing efforts, and stock levels due to changes in the average landing price and the average unit cost. As results induced by the current value Hamiltonian method, the optimal harvests, fishing efforts, and stock levels regarding the hairtail caught by several fishing gears were estimated as 33,133 tons, 901,080 horse power, and 79,877 tons, respectively. In addition, from the results of the sensitivity analysis, first of all, if the average landing price of the hairtail constantly increases, the optimal harvests of it increase at a decreasing rate, and then harvests finally slightly decrease as a result of decreases in stock levels. Secondly, if the average unit cost of fishing efforts continuously increases, the optimal fishing efforts decreases, but optimal stock levels increase. Optimal harvests start climbing and then decrease continuously due to increases in the average unit cost. In summary, this study suggests that the optimal harvests (33,133 tons) were larger than actual harvests (25,133 tons), but the optimal fishing efforts (901,080 horse power) were much less than estimated standardized fishing efforts (1,277,284 horse power), corresponding to the average of the recent three years (2014-2016). This result implies that the hairtail has been inefficiently harvested and recently overfished due to excessive fishing efforts. Efficient management and conservation policies on stock levels need to be urgently implemented. Some appropriate strategies would be to include the hairtail in the Korean TAC species or to extend the closed fishing season for this species.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.295-307
• /
• 2021

The Korean Peninsula is surrounded on three sides by the East Sea, West Sea and South Sea which are connected to many rivers and streams, thereby facilitating easy inflow of debris from land. Furthermore, excessive debris inflow to the sea because of active fishing and various recreational activities. Debris entering the sea are weighted over time and settle in the seabed, thus, making direct monitoring of debris impossible and its collection difficult. Uncollected submerged marine debris affects the seabed ecosystem and water quality and can cause ghost fishing and ship accidents, especially due to waste net ropes and waste fishing gears. Therefore, understanding the debris distribution characteristics is necessary to assist quick collection of these debris (waste net ropes and waste fishing gears). Thus, this study conducted a survey of debris deposited in the seas of 39 ports. Furthermore, distribution characteristics and compositions of submerged marine debris were identified by a map prepared through GIS-based spatial analysis of the East Sea. Consequently, 58% of waste tires in the East Sea were concentrated in breakwaters and ship berthing facilities. Moreover, 26 % of waste plastics were distributed outside the port. Identifying the distinct distribution characteristics of submerged marine debris was difficult; however, compared with others, the distribution of waste plastics was possible outside the port. The findings of this study can serve as baseline data to assist the collection of submerged marine debris using the distribution characteristics.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.15-20
• /
• 2005

Most of studies for the ground load and ground behavior of landing gear have been conducted with an assumption that the structure of landing gear was rigid body. The assumption of rigid body during design process results in many errors or discrepancy. High ground load occurs in 3 directions on the shock absorbing strut during landing. This ground load initiated high structural deformation. In this study, the flex-multi-body dynamics is applied to adapt flexible bodies, so the results of analysis can be described close to landing gears real behaviour.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1991.06a
• /
• pp.1-30
• /
• 1991

The lubrication state between contacting bodies with rolling and sliding under loaded condition is generally understood by the conception shown in Figure 1. When the lubricating oil film formation between facing bodies is good enough to separate these bodies by the hydrodynamic pressure, this state is called by the expression of "hydrodynamic lubrication". The thickness of oil film is so large that the lubricating oil between facing bodies behaves as fluid and metal-to-metal contact between surface roughness asperities on facing bodies does not occur. When the oil film thickness becomes thinner or when the surface roughness height becomes larger, top of surface roughness asperities on facing bodies reaches very near to each other and there the oil or absorbed oil molecules on the surface of facing bodies behave no more as fluid. Partly metal-to-metal contact of surface roughness asperities occurs. Such lubrication state is called by the expression "mixed-lubrication". When the oil film thickness becomes more thinner or surface roughness height becomes larger, metal-tometal contact or contact via absorbed oil molecules dominate at most of the part in contact zone. Such state is called by the expression "boundary lubrication". Schematic representation of these three regimes of lubrication is shown in Figure 1.rication is shown in Figure 1.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.1
• /
• pp.11-19
• /
• 2002

This study described computer aided die design system for cold forging of non-axisymmetric parts such as gears and splines. To design the cold forging die, an integrated approach based on a rule-base system and commercial F. E. code were adopted. This system is implemented on the personal computer and its environment is a commercial CAD package named as Auto CAD. The system includes four modules. In the initial data input module, variables which are necessary to design of die are inputted by user and die material are selected from the database according to the variables. In the analysis and redesign module, stress distribution acting on the designed die is analyzed by commercial FEM code NISA II with elastic mode. If die failure predicted, the designed die would modified in four ways to prevent die failure in both states of stress free and pressurizing. The developed system provides useful date and powerful capabilities for die design of non-axisymmetric parts.