• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.126-131
• /
• 2006

• 한국CDE학회논문집
• /
• 제17권5호
• /
• pp.312-323
• /
• 2012

Planetary gearing is a gear system consisting of one or more planet gears, revolving about a sun gear. While the planetary gear system has many advantages- for example, high power density, large reduction in a small volume, multiple kinematic combinations, pure torsional reactions, and coaxial shafting, it has not been widely used because of its high bearing loads, inaccessibility, and design complexity. It is also necessary to shift several pairs of gear profiles at a same time. Therefore, designing profile shifted planetary gear system is a difficult and know-how dependent job. This study provides a practical solution to design a profile shifted gear system by the procedural design scheme, and proposes a bearing integrated structure of the dual stage profile shifted gear system with a robust output end. A dual stage profile shifted gear system with the bearing integrated structure is manufactured by the proposed design scheme in this study. This gear system is verified that it is good enough to commercialize, because it has high performance with high gear ratio and robust output end against axial and radial directional runouts in a small space.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.785-789
• /
• 2013

Worm gear sets may be either single- or double-enveloping. In a single-enveloping set, the worm wheel is cut into a concave surface, thus partially enclosing the worm when meshed. The double-enveloping worm gear is similar to the single-enveloping gear; however, the worm envelopes the worm gear. Thus both are throated. The double-enveloping worm gear has more of the tooth surface in contact than the single-enveloping worm gear. The larger contact area increases the load-carrying capacity. For this reason, double-enveloping worm gearing is widely applied in heavy-duty machinery, for applications including construction and metallurgy. In this paper, we designed a compact reduction gear that is highly efficient using double-enveloping worm gears. We calculated the bearing load in the worm gearing to select the bearing and the housing surface area according to the recommended values from AGMA(American Gear Manufacturers Association). The finite element method was used to assess the structural integrity.

• 대한전자공학회논문지TC
• /
• 제42권1호`
• /
• pp.49-60
• /
• 2005

유무선 기간 망에서 사용되어 지는 Core Network System간 연동 부분의 Back Bone이 NO.7 Protocol이다. 그래서 유선망에서 기본적인 중계 ISUP이나, 지능망 INAP 처리, 그리고 이동망에서 각 Network Element System간 연동되는 MAP 연동 방식이 NO.7 방식을 사용하고 있다. 따라서 이 NO.7을 이용하는 Core Network에서 운영 중에 장애가 발생하거나, 기존에 인지되지 않고 지나온 문제점들을 최단시간에 감지하여 도출할 수 있는 시스템이 필요로 되었다. 본 논문에서는 Core Network 에서 사용되는 NO.7 Signaling 방식에 대해 더욱 신뢰성을 확보하고, 장애 발생 여부 등을 분석할 수 있도록 하기 위하여 NO.7 Signaling Message들을 추출하여 Core Network 시스템의 기능 및 성능을 분석하고 Report를 작성할 수 있는 NO.7 Protocol 분석 측정 시스템을 고안하였다. 이 시스템은 NO.7 Signaling을 담당하는 Core Network 시스템의 NO.7 HW Module 에 연결하여 Monitoring만 수행하고, 어떤 시나리오에 대한 Emulator 기능이나 Simulation 기능은 제공하지 않는다. 이 시스템은 현재 NO.7 MTP, ISUP, INAP, 그리고 MAP 에 대해 측정 및 분석기능을 수행하도록 하였고, 여러 유무선 기간 망 사업자에 제공하여 SW 및 HW 적인 면 그리고 운영적인면 등에서 여러 가지 문제들을 확인하여 교정할 수 있었다. 향후에는 이외에 BSC-MSC 연동되어 지는 A-Interface 등과 같은 기능도 제공함으로써 NO.7 Protocol 전반적인 분석과 동시에 Core Network 시스템에 효율적인 운영을 도모할 수 있다.

• 한국정밀공학회지
• /
• 제7권3호
• /
• pp.103-114
• /
• 1990

Many high speed mechanical systems incorporate gearing for speed reduction. This study investigates the stability of mulit-rotor geared systems supported on oil film bearings taking into consideration the coupling between torsional and lateral dynamics. The emphasis of the study is on the analysis of the interaction between the combined torsional and whirl insta- bilities. The feasility of inducing a lateral and the torsional instability to neutralize an anticipated unstable condition is investigated. The possibility of suppressing the instabilities by controlling the parameters of the oil film bearings is also considered.

• Tribology and Lubricants
• /
• 제5권2호
• /
• pp.107-112
• /
• 1989

This paper deals with strength analysis of tooth and method of manufacture of external tooth profile in harmonic drive. From the calculation of load imposed on the contact teeth, moximum contact stress is investigated to design the addendum modification coefficient. New tooth profile of the external gear is generated according to the law of gearing, assuming that internal gear has involute tooth profile. External tooth profile can't be manufactured by conventional exclusive tools which have pressure angle of 20$\circ$. The method to design cutter tooth profile is presented.

• 대한가정학회지
• /
• 제28권3호
• /
• pp.53-65
• /
• 1990

The purpose of the study was to identify the living pattern and the space use in Urban Houses, Seoul, Chunju, Ulsan were selected as study sites. The space organizing form and space use was investigated by means of interviews. Through various ways of analysis, we could find that the function of Anbang, Guesil, Buauk were multipurpose. Anbang was not only for sleeping but also for entertaining and family living. Guesil(living room) is slowly gearing into family and entertainment rooms. Buauk are changing to the dining room as well as kitchen.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.487-491
• /
• 2001

In this paper, we developed an automated program for the modeling and manufacturing of three-dimensional roller gear cams. A computer program employing the theory of gearing and coordinate transformation is developed for synthesizing and animating cam mechanisms. Then a module for generation NC program for a five-axis CNC machine to manufacture roller gear cam is established.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.251-254
• /
• 2000

In this paper, we developed an automated program for the modeling and manufacturing of three-dimensional roller gear cams. A computer program employing the theory of gearing and coordinate transformation is developed for synthesizing and animating cam mechanisms. A method using wire frame modeling and shading by triangular element is presented, and effectively used for modeling of example with reduced computation time. Then a module for generation NC program for a five-axis CMC machine to manufacture roller gear cam is established.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.698-701
• /
• 1997

In this paper, we developed an automated program for the design and machining of spiroid bevel gear. A computer program employing the theory of gearing between gear and pinion is developed to design gear mechanism. A new method for machining spiro야 bevel gears is proposed, and effectively used for an example.