• Title/Summary/Keyword: gate-oxide breakdown

Search Result 103, Processing Time 0.025 seconds

The Influence of Cyclic Treatments with H₂O₂ and HF Solutions on the Roughness of Silicon Surface

  • 이혜영;이충훈;전형탁;정동운
    • Bulletin of the Korean Chemical Society
    • /
    • v.18 no.7
    • /
    • pp.737-740
    • /
    • 1997
  • The influence of cyclic treatments with H2O2/DIW (1 : 10) and HF/DIW (1 : 100) on the roughness of silicon surface in the wet chemical processing was investigated by atomic force microscopy (AFM). During the step of the SC-1 cleaning, there is a large increase in roughness on the silicon surface which will result in the poor gate oxide breakdown properties. The roughness of the silicon wafer after the SC-1 cleaning step was reduced by cyclic treatments of hydrogen peroxide solution and hydrofluoric acid solution instead of HF-only cleaning. AFM images after each step clearly illustrated that the average roughness of silicon surface after three times treatments with H2O2 and HF solutions was reduced by 10 times compared with that after the SC-1 cleaning step.

Process Characteristics of Thin Dielectric at MOS Structure (MOS 구조에서 얇은 유전막의 공정 특성)

  • Eom, Gum-Yong;Oh, Hwan-Sool
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.11a
    • /
    • pp.207-209
    • /
    • 2004
  • Currently, for satisfying the needs of scaled MOSFET's a high quality thin oxide dielectric is desired because the properties of conventional $SiO_2$ film are not acceptable for these very small sized transistors. As an alternative gate dielectric have drawn considerable alternation due to their superior performance and reliability properties over conventional $SiO_2$, to obtain the superior characteristics of ultra thin dielectric films, $N_2O$ grown thin oxynitride has been proposed as a dielectric growtuanneal ambient. In this study the authors observed process characteristics of $N_2O$ grown thin dielectric. In view points of the process characteristics of MOS capacitor, the sheet resistance of 4.07$[\Omega/sq.]$, the film stress of $1.009e^{10}[dyne/cm^2]$, the threshold voltage$(V_t)$ of 0.39[V], the breakdown voltage(BV[V]) of 11.45[V] was measured in PMOS. I could achieve improved electrical characteristics and reliability for deep submicron MOSFET devices with $N_2O$ thin oxide.

  • PDF

Properties of the oxynitride films prepared by reoxidation of thermal oxide in $N_2O$ ($N_2O$ 가스에서 열산화막의 재산화에 의해 형성된 oxynitride막의 특성)

  • Bae, Sung-Sig;Lee, Cheol-In;Choi, Hyun-Sik;Seo, Yong-Jin;Kim, Tae-Hyung;Kim, Chang-Il;Chang, Eui-Goo
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1993.05a
    • /
    • pp.39-43
    • /
    • 1993
  • Electricial characteristics of gate dielectrics prepared by reoxidation of thermal $SiO_2$ in nitrous oxide gas have been investigated. 10 and 19nm-thick oxides were reoxidized at temperatures of $900-1000^{\circ}C$ for 10-60 min in $N_2O$ ambient. As reoxidation proceeds, it is shown that nitrogen concentration at $Si/SiO_2$ interface increases gradually through the AES analysis. Nitrogen pile-up at $Si/SiO_2$ interface acts as a oxidant diffusion barrier that reduces the oxidation rate significantly. And it not only strengthen oxynitride structure at the interface but improve the gate dielectric qualities. Reliabilities of oxynitride films are conformed by the breakdown distributions and constant current stress technique. Therefore, the oxynitride films made by this process show a good promise for future ULSI applications.

  • PDF

Advances in Power Semiconductor Devices for Automotive Power Inverters: SiC and GaN (전기자동차 파워 인버터용 전력반도체 소자의 발전: SiC 및 GaN)

  • Dongjin Kim;Junghwan Bang;Min-Su Kim
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.30 no.2
    • /
    • pp.43-51
    • /
    • 2023
  • In this paper, we introduce the development trends of power devices which is the key component for power conversion system in electric vehicles, and discuss the characteristics of the next-generation wide-bandgap (WBG) power devices. We provide an overview of the characteristics of the present mainstream Si insulated gate bipolar transistor (IGBT) devices and technology roadmap of Si IGBT by different manufacturers. Next, recent progress and advantages of SiC metal-oxide-semiconductor field-effect transistor (MOSFET) which are the most important unipolar devices, is described compared with conventional Si IGBT. Furthermore, due to the limitations of the current GaN power device technology, the issues encountered in applying the power conversion module for electric vehicles were described.

TID and SEGR Testing on MOSFET of DC/DC Power Buck Converter (DC/DC 강압컨버터용 MOSFET의 TID 및 SEGR 실험)

  • Lho, Young Hwan
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.42 no.11
    • /
    • pp.981-987
    • /
    • 2014
  • DC/DC switching power converters are commonly used to generate a regulated DC output voltage with high efficiency. The DC/DC converter is composed of a MOSFET (metal-oxide semiconductor field effect transistor), a PWM-IC (pulse width modulation-integrated circuit) controller, inductor, capacitor, etc. It is shown that the variation of threshold voltage and the breakdown voltage in the electrical characteristics of MOSFET occurs by radiation effects in TID (Total Ionizing Dose) testing at the low energy ${\gamma}$ rays using $^{60}Co$, and 5 heavy ions make the gate of MOSFET broken in SEGR (Single Event Gate Rupture) testing. TID testing on MOSFET is accomplished up to the total dose of 40 krad, and the cross section($cm^2$) versus LET(MeV/mg/$cm^2$) in the MOSFET operation is studied at SEGR testing after implementation of the controller board.

Electrical Characterization of Lateral NiO/Ga2O3 FETs with Heterojunction Gate Structure (이종접합 Gate 구조를 갖는 수평형 NiO/Ga2O3 FET의 전기적 특성 연구)

  • Geon-Hee Lee;Soo-Young Moon;Hyung-Jin Lee;Myeong-Cheol Shin;Ye-Jin Kim;Ga-Yeon Jeon;Jong-Min Oh;Weon-Ho Shin;Min-Kyung Kim;Cheol-Hwan Park;Sang-Mo Koo
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.36 no.4
    • /
    • pp.413-417
    • /
    • 2023
  • Gallium Oxide (Ga2O3) is preferred as a material for next generation power semiconductors. The Ga2O3 should solve the disadvantages of low thermal resistance characteristics and difficulty in forming an inversion layer through p-type ion implantation. However, Ga2O3 is difficult to inject p-type ions, so it is being studied in a heterojunction structure using p-type oxides, such as NiO, SnO, and Cu2O. Research the lateral-type FET structure of NiO/Ga2O3 heterojunction under the Gate contact using the Sentaurus TCAD simulation. At this time, the VG-ID and VD-ID curves were identified by the thickness of the Epi-region (channel) and the doping concentration of NiO of 1×1017 to 1×1019 cm-3. The increase in Epi region thickness has a lower threshold voltage from -4.4 V to -9.3 V at ID = 1×10-8 mA/mm, as current does not flow only when the depletion of the PN junction extends to the Epi/Sub interface. As an increase of NiO doping concentration, increases the depletion area in Ga2O3 region and a high electric field distribution on PN junction, and thus the breakdown voltage increases from 512 V to 636 V at ID =1×10-3 A/mm.

A Study About Design and Characteristic Improvement According to P-base Concentration Charge of 500 V Planar Power MOSFET (500 V 급 Planar Power MOSFET의 P 베이스 농도 변화에 따른 설계 및 특성 향상에 관한 연구)

  • Kim, Gwon Je;Kang, Ye Hwan;Kwon, Young-Soo
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.26 no.4
    • /
    • pp.284-288
    • /
    • 2013
  • Power MOSFETs(Metal Oxide Semiconductor Field Effect Transistor) operate as energy control semiconductor switches. In order to reduce energy loss of the device during switch-on state, it is essential to increase its conductance. We have experimental results and explanations on the doping profile dependence of the electrical behavior of the vertical MOSFET. The device is fabricated as $8.25{\mu}m$ cell pitch and $4.25{\mu}m$ gate width. The performances of device with various p base doping concentration are compared at Vth from 1.77 V to 4.13 V. Also the effect of the cell structure on the on-resistance and breakdown voltage of the device are analyzed. The simulation results suggest that the device optimized for various applications can be further optimized at power device.

A Small Scaling Lateral Trench IGBT with Improved Electrical Characteristics for Smart Power IC (스마트 파워 IC를 위한 향상된 전기특성의 소규모 횡형 트랜치 IGBT)

  • 문승현;강이구;성만영
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2001.07a
    • /
    • pp.267-270
    • /
    • 2001
  • A new small scaling Lateral Trench Insulated Gate Bipolar Transistor (SSLTIGBT) was proposed to improve the characteristics of the device. The entire electrode of the LTIGBT was replaced with a trench-type electrode. The LTIGBT was designed so that the width of device was no more than 10$\mu\textrm{m}$. The latch-up current densities were improved by 4.5 and 7.6 times, respectively, compared to those of the same sifted conventional LTIGBT and the conventional LTIGBT which has the width of 17$\mu\textrm{m}$. The enhanced latch-up capability of the SSLTIGBT was obtained due to the fact that the hole current in the device reaches the cathode via the p+ cathode layer underneath the n+ cathode layer, directly. The forward blocking voltage of the SSLTIGBT was 125 V. At the same size, those of the conventional LTIGBT and the conventional LTIGBT with the width of 17$\mu\textrm{m}$ were 65 V and 105 V, respectively. Because the proposed device was constructed of trench-type electrodes, the electric field in the device were crowded to trench oxide. Thus, the punch through breakdown of LTEIGBT occurred late.

  • PDF

High quality $SiO_2$ gate Insulator with ${N_2}O$ plasma treatment and excimer laser annealing fabricated at $150^{\circ}C$ (${N_2}O$ 플라즈마 전처리와 엑시머 레이저 어닐링을 통한 $150^{\circ}C$ 공정의 실리콘 산화막 게이트 절연막의 막질 개선 효과)

  • Kim, Sun-Jae;Han, Sang-Myeon;Park, Joong-Hyun;Han, Min-Koo
    • Proceedings of the KIEE Conference
    • /
    • 2006.10a
    • /
    • pp.71-72
    • /
    • 2006
  • 플라스틱 기판 위에 유도 결합 플라즈마 화학적 기상 증착장치 (Inductively Coupled Plasma Chemicai Vapor Deposition, ICP-CVD) 를 사용하여 실리콘 산화막 ($SiO_2$)을 증착하고, 엑시머레이저 어널링 (Excimer Laser Annealing, ELA) 과 $N_{2}O$ 플라즈마 전처리를 통해, 전기용량-전압(Capacitance-Voltage, C-V) 특성과 항복 전압장 (Breakdown Voltage Field) 과 같은 전기적 특성을 개선시켰다. 에너지 밀도 $250\;mJ/cm^2$ 의 엑시머 레이저 어닐링은 실리콘 산화막의 평탄 전압 (Flat Band Voltage) 을 0V에 가까이 이동시키고, 유효 산화 전하밀도 (Effective Oxide Charge Density)를 크게 감소시킨다. $N_{2}O$ 플라즈마 전처리를 통해 항복 전압장은 6MV/cm 에서 9 MV/cm 으로 향상된다. 엑시머 레이저 어닐링과 $N_{2}O$ 플라즈마 전처리를 통해 평탄 전압은 -9V 에서 -1.8V 로 향상되고, 유효 전하 밀도 (Effective Charge Density) 는 $400^{\circ}C$에서 TEOS 실리콘 산화막을 증착하는 경우의 유효 전하 밀도 수준까지 감소한다.

  • PDF

A Small Scaling Lateral Trench IGBT with Improved Electrical Characteristics for Smart Power IC

  • Moon, Seung Hyun;Kang, Ey Goo;Sung, Man Young
    • Transactions on Electrical and Electronic Materials
    • /
    • v.2 no.4
    • /
    • pp.15-18
    • /
    • 2001
  • A new small scaling Lateral Trench Insulated Gate Bipolar Transistor (SSLTIGBT) was proposed to improve the characteristics of the device. The entire electrode of the LTIGBT was replaced with a trench-type electrode. The LTIGBT was designed so that the width of device was no more than 10 ${\mu}{\textrm}{m}$. The latch-up current densities were improved by 4.5 and 7.6 times, respectively, compared to those of the same sized conventional LTIGBT arid the conventional LTIGBT which has the width of 17 ${\mu}{\textrm}{m}$. The enhanced latch-up capability of the SSLTIGBT was obtained due to the fact that the hole current in the device reaches the cathode via the p+ cathode layer underneath the n+ cathode layer, directly. The forward blocking voltage of the SSLTIGBT was 125 V. At the same size, those of the conventional LTIGBT and the conventional LTIGBT with the width of 17 ${\mu}{\textrm}{m}$ were 65 V and 105 V, respectively. Because the proposed device was constructed of trench-type electrodes, the electric field In the device were crowded to trench oxide. Thus, the punch through breakdown of LTEIGBT occurred late.

  • PDF