• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.119-123
• /
• 2002

Liquefied Natural Gas(LNG) continues to attract modern gas industries as well as domestic markets as their main energy source in the recent years. This is mainly because LNG is inherently cleaner and more energy efficiency than other fuels. Offshore LNG production plant is of interest to many oil producing companies all over the world. This article discuss about the production process encountered while developing such a production facility. Typical offshore oil and gas processing required for oil stabilization and other optional units that can be added to the facilities. The production process can broadly be divided into five major units namely, (i) Oil Stabilization unit, (ii) Gas Treatment unit, (iii) Methane Recovery unit, (iv) Distillation unit and (v) LNG Liquefaction unit. The process simulation was carried out for each unit with a given wellhead composition. The topside facilities of offshore LNG production plant will be very similar to the process adopted in offshore processing platform along with the typical onshore LNG production plant. However, the process design problems associated with FPSO motion to be taken care of while developing floating LNG production plant.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1081-1091
• /
• 2020

The most recent issue of offshore plants that produce oil and gas are the decommissioning engineering of aged or discontinued platforms. There are many platforms that are being dismantled in the United States, Europe, and areas in Southeast Asia. In particular, more than 400 old platforms in Southeast Asia (Indonesia, Malaysia) are preparing to dismantle. They are spread out across Southeast Asia with a water level of 50 meters and small-scale of less than 10,000 tons. However, this offshore plant decommissioning market is a very suitable market for small and medium-sized shipyards in Korea to enter with their established equipment and engineers. Platform decommissioning is conducted according to decommissioning procedures. However, there are some difficulties in market advances as no developed case studies or process models are established on how platform structures and components are to be dismantled and how the dismantled material is to be reused and recycled. Therefore, this study presented domestic and foreign regulations on the reuse and recycling of oil and gas producing offshore plant platforms, case analyses on developed decommissioning engineering, platform reuse and recycling guidelines, and platform and pipeline decommissioning processes and methods.

• New & Renewable Energy
• /
• v.19 no.4
• /
• pp.53-60
• /
• 2023

The Computational Fluid Dynamics (CFD) model is a method of studying the flow phenomenon of fluid using a computer and finding partial differential equations that dominate processes such as heat dispersion through numerical analysis. Through CFD, a lot of information about flow disorders such as speed, pressure, density, and concentration can be obtained, and it is used in various fields from energy and aircraft design to weather prediction and environmental modeling. The simulation used for fluid analysis in this study utilized Gexcon's (FLACS) CODE, such as Norway, through overseas journals, for the accuracy of the analysis results through many experiments. It was analyzed that a technology for treating two or more catalysts with physical properties under low-temperature atmospheric pressure conditions could not be found in the prior art. Therefore, it would be desirable to establish a continuous plan by reinforcing data that can prove the effectiveness of producing efficient synthetic oil (renewable oil) through the application that pyrolysis under low-temperature and atmospheric pressure conditions.

• Journal of Hydrogen and New Energy
• /
• v.27 no.6
• /
• pp.621-627
• /
• 2016

Low-priced hydrogen is required in petrochemical industry for producing low-sulfur oil, and upgrading low-grade crude oil since environmental regulations have been reinforced. Steel industry can produce hydrogen from by-product gases such as Blast Furnace Gas (BFG), Coke Oven Gas (COG), and Linze Donawitz Gas (LDG) with water gas shift (WGS) reaction by catalysis. In this study, we optimized conditions for WGS reaction with commercial catalysts by BFG and LDG. In particular, the influence on activity of gas-hourly-space-velocity, and $H_2O/CO$ ratios at different temperatures were investigated. As a result, 99.9%, and 97% CO conversion were showed with BFG, and LDG respectively under $350^{\circ}C$ High Temperature Shift (HTS), $200^{\circ}C$ Low Temperature Shift (LTS), 3.0 of $H_2O/CO$, and $1500h^{-1}$ of GHSV. Furthermore, 99.9% CO conversion lasted for 250 hours with BFG as feed gas.

• Journal of the Korean Institute of Gas
• /
• v.20 no.1
• /
• pp.29-39
• /
• 2016

Electrical apparatuses for use in the presence of explosive gas atmospheres have to be special designed to prevent them from igniting the explosive gas. Flameproof design implies that electrical components producing electrical sparks are contained in enclosures and withstand the maximum pressure of internal gas or vapours. In addition, any gaps in the enclosure wall have to designed in such a way that they will not transmit a gas explosion inside the enclosure to an explosive gas or vapours atmosphere outside it. In this study, we explained some of the most important physical mechanism of Maximum Experimental Safe Gap(MESG) that the jet of combustion products ejected through the flame gap to the external surroundings do not have an energy and temperature large enough to initiate an ignition of external gas or vapours. We measured the MESG and maximum explosion pressure of propane and acetylene by the test method and procedure of IEC 60079-20-1:2010.When the minimum MESG is measured, the concentration of propane, acetylene in the air is higher than the stoichiometric point and their explosion pressure is the highest value.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.75-82
• /
• 2007

In advanced countries, a gas turbine engine is developed to use in aircraft, vessels, and target weapons. Our nation also passed the level of producing engine components and now, we are developing small-sized gas turbine engine. The most important point of the gas turbine engine, the engine control technique, is evaded by the advanced nations. This document contains the research about the development of the gas turbine engine simulator. The simulator presented in this document has a mathematical engine model based on a capacity data of the gas turbine engine to advance the engine simulator. Through this process, it eases the development of the gas turbine engine control algorithm and helps to check the engine controller function. In this simulator, the engine sensor signal conversion board is designed, so the engine model shows like a real sensor signal during the simulation. Also, this paper contrasts the actual engine test with the simulation results to verify the performance.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.63-69
• /
• 2023

Although Korea is the world's No. 1 semiconductor producing country, most studies are conducted with risk assessment for simple material risks due to the closedness of the site for industrial protection. In terms of industrial safety, a monitoring system such as a gas detector to determine the leakage of hazardous substances has been established, but research on effectively discharging harmful gastritis substances in case of leakage has only recently begun. Semiconductor manufacturing facilities (gas boxes) where a large amount of flammable materials are handled are currently being safety managed by using a gas detector and blocking the air inlet. It is difficult to dilute in a short time in case of leakage of flammable substances. Therefore, in this study, based on various criteria, the size of the duct according to the size of the gas box is determined and the appropriate size of the air inlet is studied to minimize the exhaust performance requirement without exposing hazardous chemicals to the outside in the event of a flammable leak. We want to do an optimal exhaust design.

• Food Science of Animal Resources
• /
• v.38 no.4
• /
• pp.806-815
• /
• 2018

This study was performed to isolate some strains of Bifidobacterium breve from fecal materials of neonates and to screen them for the biotransformation activity of converting linoleic acid into conjugated linoleic acid (CLA). Fecal samples were collected from twenty healthy neonates between 14 and 100 days old, and four hundred colonies were randomly selected from a Bifidobacterium selective transoligosaccharide medium. A duplex polymerase chain reaction technique was developed for the rapid and accurate molecular characterization of the B. breve strains that have been reported to show the species-specific characteristic of CLA production. They are identified by 16S ribosomal DNA, fructose-6-phosphate phosphoketolase encoding genes (xfp), and rapid pulsed field gel electrophoresis. Thirty-six isolates were identified as B. breve, and just two of the 12 neonates were harboring B. breve strains. Each isolate showed different CLA-producing ability in the spectrophotometric assay. All of the positive strains from the primary spectrophotometric assay were confirmed for their CLA-producing activities using gas-chromatographic analysis, and their conversion rates were different, depending on the strain isolated in this study. Some strains of B. breve were successfully isolated and characterized based on the CLA-producing activity, and further studies are necessary to characterize the enzyme and the gene responsible for the enzyme activity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.797-803
• /
• 2009

The accurate prediction of dynamic characteristics of high speed rotors, such as gas turbines, is important to avoid the possibility of operating the machinery near the critical speeds or unstable speed regions. However, the dynamic analysis methods and softwares for gas turbines have been developed in the process of producing many gas turbines by manufacturers and most of them have seldom been disclosed to the public. Recently, commercial FEM softwares, such as SAMCEF, ANSYS and NASTRAN, started supporting some rotordynamics analysis modules based on 3-D finite elements. In this paper, the dynamic analysis method using commercial S/W, especially ANSYS, is attempted for the small-size gas turbine engine rotor, and the analysis capability and limitations of its rotordyamics module are evaluated for further improvement of the module. As the preliminary procedure, the rotordyamic analysis capability of ANSYS was tested and evaluated with the reference models of the well-known dynamics. The limitations in application of the rotordynamics module were then identified. Under the current capability and limitations of ANSYS, it is shown that Lee diagram, a new frequency-speed diagram enhanced with the concept of $H{\infty}$ in rotating machinery, can be indirectly obtained from FRFs computed from harmonic response analysis of ANSYS. Finally, it is demonstrated based on the modeling and analysis method developed in the process of the S/W verification that the conventional Campbell diagram, Lee diagram, mode shapes and critical speeds of the small-size gas turbine engine rotor can be computed using the ANSYS rotordynamics module.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.1
• /
• pp.36-44
• /
• 2010

The accurate prediction of dynamic characteristics of high speed rotors, such as gas turbines, is important to avoid the possibility of operating the machinery near the critical speeds or unstable speed regions. However, the dynamic analysis methods and softwares for gas turbines have been developed in the process of producing many gas turbines by manufacturers and most of them have seldom been disclosed to the public. Recently, commercial FEM softwares, such as SAMCEF, ANSYS and NASTRAN, started supporting some rotordynamics analysis modules based on 3-D finite elements. In this paper, the dynamic analysis method using commercial S/W, especially ANSYS, is attempted for the small-size gas turbine engine rotor, and the analysis capability and limitations of its rotordyamics module are evaluated for further improvement of the module. As the preliminary procedure, the rotordyamic analysis capability of ANSYS was tested and evaluated with the reference models of the well-known dynamics. The limitations in application of the rotordynamics module were then identified. Under the current capability and limitations of ANSYS, it is shown that Lee diagram, a new frequency-speed diagram enhanced with the concept of $H{\infty}$ in rotating machinery, can be indirectly obtained from FRFs computed from harmonic response analysis of ANSYS. Finally, it is demonstrated based on the modeling and analysis method developed in the process of the S/W verification that the conventional Campbell diagram, Lee diagram, mode shapes and critical speeds of the small-size gas turbine engine rotor can be computed using the ANSYS rotordynamics module.