DOI QR코드

DOI QR Code

Effects of Thermal Dispersion Damage on the Pyrolysis and Reactor Relarionship Using Comutational Fluids Dynamics

전산유체역학을 활용한 폐플라스틱열분해 반응기의 기체분산판에 대한 유동해석

  • Jongil, Han (Energy Research Center, New Energy Institute, Korea Gas Technology Corporation) ;
  • SungSoo, Park (Energy Research Center, New Energy Institute, Korea Gas Technology Corporation) ;
  • InJea, Kim (Energy Research Center, New Energy Institute, Korea Gas Technology Corporation) ;
  • Kwangho, Na (Energy Research Center, New Energy Institute, Korea Gas Technology Corporation)
  • Received : 2023.12.08
  • Accepted : 2023.12.18
  • Published : 2023.12.25

Abstract

The Computational Fluid Dynamics (CFD) model is a method of studying the flow phenomenon of fluid using a computer and finding partial differential equations that dominate processes such as heat dispersion through numerical analysis. Through CFD, a lot of information about flow disorders such as speed, pressure, density, and concentration can be obtained, and it is used in various fields from energy and aircraft design to weather prediction and environmental modeling. The simulation used for fluid analysis in this study utilized Gexcon's (FLACS) CODE, such as Norway, through overseas journals, for the accuracy of the analysis results through many experiments. It was analyzed that a technology for treating two or more catalysts with physical properties under low-temperature atmospheric pressure conditions could not be found in the prior art. Therefore, it would be desirable to establish a continuous plan by reinforcing data that can prove the effectiveness of producing efficient synthetic oil (renewable oil) through the application that pyrolysis under low-temperature and atmospheric pressure conditions.

Keywords

Acknowledgement

본 논문은 정부(국토교통부)의 재원으로 국토과학기술진흥원(KAIA)의 지원을 받아 수행된 "RE100기반의수소시범도시인프라기술개발"(RS-2022-00143582)연구지원받아 수행 하였으며 이에 감사드립니다.

References

  1. ASTM E872-82, 2019, "Standard test method for volatile matter in the anlysis of particulate wood fuels".
  2. ASTM D1102-84, 2021, "Standard test method for ash in the wood".
  3. Kim, S., Jang, E.S., Shin, D.H., and Lee, K.H., 2004, "Using peak properties of a DTG curve to estimate the kinetic parameters of the pyrolysis reaction: Application to high density polyethylene", Polymer Degradation and Stability, 85(2), 799-805. https://doi.org/10.1016/j.polymdegradstab.2004.03.009
  4. ASTM E698-11, 2016, "Standard test method for arrhenius kinetic constants for thermally unstable materials using differential scanning calorimetry and the flynn/wall/ozawa method".
  5. Park, K.I., Kim, D.W., Lee, T.H., and Lee, J.M., 2013, "Kinetic analysis of isothermal pyrolysis of Korean refuse plastic fuel for application to circulating fluidized bed boiler", Korean Chemical Engineering Research, 51(6), 692-699. https://doi.org/10.9713/kcer.2013.51.6.692
  6. Al-Salem, S.M., and Lettieri, P., 2010, "Kinetic study of high density polyethylene (HDPE) pyrolysis", Chemical Engineering Research and Design, 88(22), 1599-1606. https://doi.org/10.1016/j.cherd.2010.03.012
  7. Encinar, J.M., and Gonxalez, J.F., 2008, "Pyrolysis of synthetic polymers and plastic wastes", Fuel Processing Technology, 89(7), 678-686. https://doi.org/10.1016/j.fuproc.2007.12.011
  8. Kim, Y.M., Kim, S., Han, T.U., Park, Y.K., and Watanabe, C., 2014, "Pyrolysis reaction characteristics of Korean pine (Pinus Koraiensis) nut shell", JAAP, 110, 435-441. https://doi.org/10.1016/j.jaap.2014.10.013
  9. Kim, Y.M., Han, T.U., Hwang, B., Lee, B., Lee, H.W., Park, Y.K., and Kim, S., 2016, "Pyrolysis kinetics and product properties of softwoods, hardwoods, and the nut shell of softwood", Korean Journal of Chemical Engineering, 33(8), 2350-2358. https://doi.org/10.1007/s11814-016-0142-2
  10. Vega, D., Villar, M.A., Failla, M.D., and Valles, E.M., 1996, "Thermogravimetric analysis of starch-based biodegradable blends", Polymer Bulletin, 37, 229-235. https://doi.org/10.1007/BF00294126
  11. Kim, B.S., Kim, Y.M., Lee, H.W., Jae, J., Kim, D.H., Jung, S.C., Watanabe, C., and Park, Y.K., 2016, "Catalytic copyrolysis of cellulose and thermoplastics over HZSM-5 and HY", ACS Sustainable Chem. Eng., 4(3), 1354-1363. https://doi.org/10.1021/acssuschemeng.5b01381
  12. Tsuge, S., Ohtani, H., and Watanabe, C., 2012, "Pyrolysis-GC/MS data book of synthetic polymers: Pyrograms, thermograms and MS of pyrolyzates", Elsevier, Netherlands.
  13. Yang, Z., Liu, X., Yang, Z., Zhuang, G., Bai, Z., Zhang, H., and Guo, Y., 2013, "Preparation and formation mechanism of levoglucosan from starch using a tubular furnace pyrolysis reactor", JAAP, 102, 83-88. https://doi.org/10.1016/j.jaap.2013.03.012
  14. ECOCREATION, 2020, "Environment national impact assessment report".