• 공업화학
• /
• 제10권3호
• /
• pp.331-335
• /
• 1999

진이급속 산화물은 전기화학적 산소 발생/환원에 대한 bifunctional 촉매효과가 있어 금속-공기 이차전지와 같은 에너지 저장기술 개발에 연구대상이 되어왔다. Amorphous citrate precursor법을 이용하여 perovskite 구조를 갖는 La-Ca-Co 산화물과 pyrochlore 구조를 갖는 Pb-Ru 산화물을 제조하고, 이후 열처리법으로 표면적이 큰 전이금속 산화물 촉매분말을 제조하였다. PTFE 결합 기체확산형 전극의 충방전 실험을 통하여 전기화학적 산소발생/환원에 대한 좋은 촉매능을 가짐을 확인하였고, ${\pm}25mA/cm^2$의 전류밀도를 가하고 공기를 공급하면서 충방전 실험한 결과 100시간 이내에서 두촉매분말 모두 안정하였다. ACP법으로 제조한 perovskite 구조의 La0.6Ca0.4CoO3과 pyrochlore 구조의 Pb2Ru2O6가 이차전지용 공기전극 재료로 사용할 수 있음을 확인하였다.

• Journal of Applied Biological Chemistry
• /
• 제50권3호
• /
• pp.148-154
• /
• 2007

Volatile components of the essential oils of Satsuma mandarin (C. unshiu), Dangyuza (C. grandis), Yuza (C. junos), Byungkyul (C. playtymamma), Jinkyul (C. sunki), and Hakyul (C. natsudaidai) grown in Jeju Island were isolated from the fruit peels by hydro distillation and determined by GC-MS. GC-MS analysis identified 58 compounds, with main components being d-limonene $(64.01{\sim}79.34%),\;{\beta}-myrcene\;(3.01{\sim}26.53%),\;{\gamma}-terpinene\;(0.11{\sim}12.88%),\;{\beta}-pinene\;(0.78{\sim}4.74%),\;and\;{\alpha}-pinene\;(1.01{\sim}2.55%)$. Differences in compositions and contents of the essential oils were observed among citrus varieties. Effects of citrus oils on growth inhibitions of Escherchia coli, Staphyllococcus epidermidis, and Candida albicans were investigated using disc diffusion assay and minimal inhibitory concentration (MIC) assay. The essential oils inhibited growths of the test organisms, exhibiting higher levels of activity against Gram-positive S. epidermidis (MIC values $0.04{\sim}0.17mg/mL$), whereas Gram-negative E. coli was moderately resistant (MIC values $1.66{\sim}20.30mg/mL$). MIC of citrus essential oils ranged from $0.82{\sim}23.69mg/mL$ against C. albicans. The essential oils obtained from C. sunki, C. grandis, and C. playtymamma showed the highest antimicrobial activities against S. epidermidis and C. albicans, indicating their potential as natural antimicrobial agents.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2018년도 춘계학술대회 논문집
• /
• pp.129-129
• /
• 2018

Hard coating application is effective way of cutting tool for hard-to-machine materials such as Inconel, Ti and composite materials focused on high-tech industries which are widely employed in aerospace, automobile and the medical device industry also Information Technology. In cutting tool for hard-to-machine materials, high hardness is one of necessary condition along with high temperature stability and wear resistance. In recent years, high-entropy alloys (HEAs) which consist of five or more principal elements having an equi-atomic percentage were reported by Yeh. The main features of novel HEAs reveal thermodynamically stable, high strength, corrosion resistance and wear resistance by four characteristic features called high entropy, sluggish diffusion, several-lattice distortion and cocktail effect. It can be possible to significantly extend the field of application such as cutting tool for difficult-to-machine materials in extreme conditions. Base on this understanding, surface coatings using HEAs more recently have been developed with considerable interest due to their useful properties such as high hardness and phase transformation stability of high temperature. In present study, the nanocomposite coating layers with high hardness on WC substrate are investigated using high entropy alloy target made a powder metallurgy. Among the many surface coating methods, reactive magnetron sputtering is considered to be a proper process because of homogeneity of microstructure, improvement of productivity and simplicity of independent control for several critical deposition parameters. The N2 is applied to reactive gas to make nitride system with transition metals which is much harder than only alloy systems. The acceleration voltage from 100W to 300W is controlled by direct current power with various deposition times. The coating layers are systemically investigated by structural identification (XRD), evaluation of microstructure (FE-SEM, TEM) and mechanical properties (Nano-indenter).

• Macromolecular Research
• /
• 제17권7호
• /
• pp.528-532
• /
• 2009

The size and shape of free volume (FV) holes available in membrane materials control the rate of gas diffusion and its permeability. Based on this principle, a segmented, thermo-sensitive polyurethane (TSPU) membrane with functional gate, i.e., the ability to sense and respond to external thermo-stimuli, was synthesized. This smart membrane exhibited close-open characteristics to the size of the FV hole and water vapor permeation and thus can be used as smart food packaging materials. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), positron annihilation lifetimes (PAL) and water vapor permeability (WVP) were used to evaluate how the morphological structure of TSPU and the temperature influence the FV holes size. In DSC and DMA studies, TSPU with a crystalline transition reversible phase showed an obvious phase-separated structure and a phase transition temperature at $53^{\circ}C$ (defined as the switch temperature and used as a functional gate). Moreover, the switch temperature ($T_s$) and the thermal-sensitivity of TSPU remained available after two or three thermal cyclic processes. The PAL study indicated that the FV hole size of TSPU is closely related to the $T_s$. When the temperature varied cyclically from $T_s-10{\circ}C$ to $T_s+10^{\circ}C$, the average radius (R) of the FV holes of the TSPU membrane also shifted cyclically from 0.23 to 0.467 nm, exhibiting an "open-close" feature. As a result, the WVP of the TSPU membrane also shifted cyclically from 4.30 to $8.58\;kg/m^2{\cdot}d$, which produced an "increase-decrease" response to the thermo-stimuli. This phase transition accompanying significant changes in the FV hole size and WVP can be used to develop "smart materials" with functional gates and controllable water vapor permeation, which support the possible applications of TSPU for food packaging.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.99-101
• /
• 1998

1. Introduction : The conventional grafting polymerization technique requires chemically reactive groups on the surface as well as on the polymer chains. For this reason, a series of prefunctionalization steps are necessary for covalent grafting. The surface prefunctionalizational technique for grafting can be used to ionization radiation, UV, plasma, ion beam or chemical initiators. Of these techniques, radiation method is one of the useful methods because of uniform and rapid creation of active radical sites without catalytic contamination in grafted samples. If the diffusion of monomer into polymer is large enough to come to the inside of polymer substrate, a homogeneous and uniform grafting reaction can be carried out throughout the whole polymer substrate. Radiation-induced grafting method may attach specific functional moieties to a polymeric substrate, such as preirradiation and simultaneous irradiation. The former is irradiated at backbone polymer in vacuum or nitrogen gas and air, and then subsequent monomer grafting by trapped or peroxy radicals, while the latter is irradiated at backbone polymer in the presence of the monomer. Therefore, radiation-induced polymerization can be used to modification of the chemical and physical properties of the polymeric materials and has attracted considerable interest because it imparts desirable properties such as blood compatibility. membrane quality, ion excahnge, dyeability, protein adsorption, and immobilization of bioactive materials. Synthesizing biocompatible materials by radiation method such as preirradiation or simultaneous irradiation has often used $\gamma$-rays to graft hydrophilic monomers onto hydrophobic polymer substrates. In this work, in attempt to produce surfaces that show low levels of anti-fouling of bovine serum albumin(BSA) solutions, hydroxyethyl methacrylate(HEMA) was grafted polypropylene membrane surfaces by preirradiation technique. The anti-fouling effect of the polypropylene membrane after grafting was examined by permeation BSA solution.

• 멤브레인
• /
• 제30권4호
• /
• pp.260-268
• /
• 2020

다층 구조를 가진 5A 제올라이트를 탄소 분자체 분리막에 첨가한 복합막을 제조하고 질소/산소의 분리 특성을 평가하였다. 제올라이트의 첨가는 선택도에는 미세한 영향을 주지만 투과도를 크게 증가시키는 방법으로 전체적인 탄소막의 질소/산소의 분리 성능을 상승시켰다. 특히 메조포어를 함유한 다층구조의 제올라이트 첨가제는 분리막의 투과도를 보다 효율적으로 상승시켜 아주 우수한 분리 성능에 도달하였다. 이 연구의 결과는 저렴한 탄소막 전구체와 제올라이트 소재를 활용하고도 고성능의 질소/산소 분리막을 손쉽게 제조할 수 있다는 것을 제시한다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제13권5호
• /
• pp.379-383
• /
• 2009

Nitric oxide (NO), a diffusible gas, is produced in the central nervous system, including the spinal cord dorsal horn and the trigeminal nucleus, the first central areas processing nociceptive information from periphery. In the spinal cord, it has been demonstrated that NO acts as pronociceptive or antinociceptive mediators, apparently in a concentration-dependent manner. However, the central role of NO in the trigeminal nucleus remains uncertain in support of processing the orofacial nociception. Thus, we here investigated the central role of NO in formalin (3%)-induced orofacial pain in rats by administering membrane-permeable or -impermeable inhibitors, relating to the NO signaling pathways, into intracisternal space. The intracisternal pretreatments with the NO synthase inhibitor L-NAME, the NO-sensitive guanylate cyclase inhibitor ODQ, and the protein kinase C inhibitor GF109203X, all of which are permeable to the cell membrane, significantly reduced the formalin-induced pain, whereas the membrane-impermeable NO scavenger PTIO significantly enhanced it, compared to vehicle controls. These data suggest that an overall effect of NO production in the trigeminal nucleus is pronociceptive, but NO extracellularly diffused out of its producing neurons would have an antinociceptive action.

• Journal of Astronomy and Space Sciences
• /
• 제34권4호
• /
• pp.343-352
• /
• 2017

A space plasma facility has been operated with a back-diffusion-type plasma source installed in a mid-sized vacuum chamber with a diameter of ~1.5 m located in Satellite Technology Research Center (SaTReC), Korea Advanced Institute of Science and Technology (KAIST). To generate plasma with a temperature and density similar to the ionospheric plasma, nickel wires coated with carbonate solution were used as filaments that emit thermal electrons, and the accelerated thermal electrons emitted from the heated wires collide with the neutral gas to form plasma inside the chamber. By using a disk-type Langmuir probe installed inside the vacuum chamber, the generation of plasma similar to the space environment was validated. The characteristics of the plasma according to the grid and plate anode voltages were investigated. The grid voltage of the plasma source is realized as a suitable parameter for manipulating the electron density, while the plate voltage is suitable for adjusting the electron temperature. A simple physical model based on the collision cross-section of electron impact on nitrogen molecule was established to explain the plasma generation mechanism.

• 한국표면공학회지
• /
• 제46권1호
• /
• pp.29-35
• /
• 2013

The effect of DC bias on the growth of nanocrystalline diamond films on silicon substrate by microwave plasma chemical vapor deposition has been studied varying the substrate temperature (400, 500, 600, and $700^{\circ}C$), deposition time (0.5, 1, and 2h), and bias voltage (-50, -100, -150, and -200 V) at the microwave power of 1.2 kW, working pressure of 110 torr, and gas ratio of Ar/1%$CH_4$. In the case of low negative bias voltages (-50 and -100 V), the diamond particles were observed to grow to thin film slower than the case without bias. Applying the moderate DC bias is believed to induce the bombardment of energetic carbon and argon ions on the substrate to result in etching the surfaces of growing diamond particles or film. In the case of higher negative voltages (-150 and -200 V), the growth rate of diamond film increased with the increasing DC bias. Applying the higher DC bias increased the number of nucleation sites, and, subsequently, enhanced the film growth rate. Under the -150 V bias, the height (h) of diamond films exhibited an $h=k{\sqrt{t}}$ relationship with deposition time (t), where the growth rate constant (k) showed an Arrhenius relationship with the activation energy of 7.19 kcal/mol. The rate determining step is believed to be the surface diffusion of activated carbon species, but the more subtle theoretical treatment is required for the more precise interpretation.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.348-353
• /
• 1996

CdS/ITO/glass 기판위에 다결정 CdTe 박막을 진공증착법으로 제조한 후 급속열처리하여 열처리 온도와 가스분위기가 CdTe의 박막의 물성과 전지특성에 미치는 효과를 연구하였다. $450^{\circ}C$에서 $550^{\circ}C$까지 공기중 급속열처리한 경우 박막은 EDX 조성분석결과 화학양론비를 유지하였고 표면성분비는 Cd-rich 상태였으나 전처리후 저저항 contact 제조에 유리한 Te-rich 상태로 변화되었다. TEM과 micro-EDX 결과 급속열처리 전후 모두 CdTe는 주상정구조가 관찰되었고 열처리동안 CdTe내로 확산된 S의 양이 로열처리와 비교하여 매우 적음을 알 수 있었다. 급속열처리 온도가 가스분위기 조건 중 공기 중에서 $550^{\circ}C$ 열처리하였을 때 가장 우수한 태양전지효율을 나타내었다.