• 대한토목학회논문집
• /
• 제9권4호
• /
• pp.135-143
• /
• 1989

깊이 32m인 심층포기장치에서 기포(氣泡)의 형태(形態)와 거동(擧動)에 관하여 실험연구(實驗硏究)를 실시하였다. 연구(硏究) 결과(結果)에 의하면, 심층포기장치의 하향관(下向管)에 설치된 0.06cm의 단일(單一) 오리피스경(經)에서 발생되는 기포(氣泡)의 구체적(球體積) 상당경(相當經)(Dv)은 0.422-0.722cm이고 기포(氣泡)의 형상(形狀)은 타원체(橢圓體)이었다. 기포(氣泡) 체류량(滯留量) 기(氣)-액(液) 접촉면적(接觸面積)은 심층포기장치의 수심(水深) 증가(增加)할수록 감소(減少)하였으며, 기포(氣泡)의 하강속도(下降速度)는 액체(液體)의 순환(循環)유속보다 작고, 기포(氣泡)의 상승속도(上昇速度)는 액체(液體)의 순환(循環)유속보다 약간 크게 나타났다. 심층포기장치내의 기포분포(氣泡分布)는 거의 대수정정규분포(代數定定規分布)를 나타내고 있으며, 또한 기포(氣泡)의 갯수는 수심(水深)이 증가(增加)할수록 감소(減少)하며, 하향관(下向管)이 상향관(上向管)에 비하여 많았다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.172-172
• /
• 2016

The International Maritime Organization(IMO) adopted the International Convention for the Control and Management of Ships' Ballast Water and Sediments in 2004 to prevent the transfer of aquatic organisms via ballast water. Forty ballast water treatment systems were granted final approval. A variety of techniques have been developed for ballast water treatment including UV treatment, indirect or direct electrolysis, ozone treatment, chemical compounds and plasma-arc method. In particular, using plasma and ozone nano-bubble treatments have been attracted in the fields. However, these treatment systems have a problem such as remained toxic substance, demand for high power source, low efficiency, ets. In this paper, we present our strilization results obtained from membrane type electrolytic-reduction treatment system The core of an electrolysis unit is an electrochemical cell, which is filled with pure water and has two electrodes connected with an external power supply. At a certain voltage, which is called critical voltage, between both electrodes, the electrodes start to produce hydrogen gas at the negatively biased electrode and oxygen gas at the positively biased electrode. The amount of gases produced per unit time is directly related to the current that passes through the electrochemical cell. From the results, we could confirm the sterilization effect of bacteria such as S. aureus, E. Coli and demonstrate the mechanism of sterilization phenomena by electrolytic-reduction treatment system.

• Nuclear Engineering and Technology
• /
• 제35권4호
• /
• pp.356-368
• /
• 2003

Material properties such as coolant specific heat, film heat transfer coefficient, cladding thermal conductivity, surface diffusion coefficient of the multi-bubble are improved in MACSIS-Mod1. The axial power and flux profile module was also incorporated with irradiation history. The performance and feasibility of the updated driver fuel pin have been analyzed for nominal parameters based on the conceptual design for the KALIMER breakeven core by MACSIS-MOD1 code. The fuel slug centerline temperature takes the maximum at 700mm from the bottom of the slug in spite of the nearly symmetric axial power distribution. The cladding mid-wall and coolant temperatures take the maximum at the top of the pin. Temperature of the fuel slug surface over the entire irradiation life is much lower than the fuel-clad eutectic reaction temperature. The fission gas release of the driver fuel pin at the end of life is predicted to be $68.61\%$ and plenum pressure is too low to cause cladding yielding. The probability that the fuel pin would fail is estimated to be much less than that allowed in the design criteria. The maximum radial deformation of the fuel pin is $1.93\%$, satisfying the preliminary design criterion ($3\%$) for fuel pin deformation. Therefore the conceptual design parameters of the driver fuel pin for the KALIMER breakeven core are expected to satisfy the preliminary criteria on temperature, fluence limit, deformation limit etc.

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.389-396
• /
• 2019

The electrical energy consumption (EEC) in removal of NO by a $UV/H_2O_2$ oxidation process was introduced and related to removal efficiency of this gas. The absorption-reaction of NO was conducted in a bubble column reactor in the presence of $SO_2$. The variation in NO removal efficiency was investigated for various process parameters including NO and $SO_2$ inlet concentrations, initial concentration of $H_2O_2$ solution and gas flow rate. EEC values were obtained in these different conditions. The removal efficiency was increased from about 22% to 54.7% when $H_2O_2$ concentration increased from 0.1 to 1.5 M, while EEC decreased by about 70%. However, further increase in $H_2O_2$ concentration, from 1.5 to 2, had no significant effect on NO absorption and EEC. An increase in NO inlet concentration, from 200 to 500 ppm, decreased its removal efficiency by about 10%. However, EEC increased from $2.9{\times}10^{-2}$ to $3.9{\times}10^{-2}kWh/m^3$. Results also revealed that the presence of $SO_2$ had negative effect on NO removal percentage and EEC values. Some experiments were conducted to investigate the effect of $H_2O_2$ solution pH. The changing of pH of oxidation-absorption medium in the ranges between 3 to 10, had positive and negative effects on removal efficiency depending on pH value.

• 공업화학
• /
• 제33권6호
• /
• pp.606-612
• /
• 2022

수용액에서 수용성 염료를 소수성 염료로 전환시킨 후 마이크로 버블을 이용한 침전 및 부상응집에 의한 염료를 제거하는 연구를 수행하였다. 양이온성 염료에 음이온 collector를 반응시키며, 또한 음이온성 염료에 양이온 collector를 첨가하여 소수성으로 변환시켰다. 소수성으로 전환된 염료 용액을 회분식 반응기에 저장하여 마이크로 버블을 분사시켜 색을 제거하였다. 염료 용액을 제조하기 위해 Basic Yellow 1 및 Direct Orange 10을 사용하였으며, sodium dodecyl sulfate, oleic acid sodium salt 및 amine류와 같은 음이온 및 양이온 collector를 사용하면 색 제거에 효과적이었으며, 모든 색은 8분 이내에 제거되었다. 색 제거는 collector의 첨가량과 수용액 pH의 영향을 받으며, 염료농도에 비해 극히 소량의 계면활성제를 첨가하였을 경우에는 pH에 의존하였으나, 염료농도와 비슷한 collector 양을 첨가하였을 경우에는 pH에 의존하지 않았음을 알 수 있었다. 그 이유는 collector와 염료가 1:1M로 반응하여 소수성이 완전히 부여되어야 제거됨을 알 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제6권1호
• /
• pp.23-29
• /
• 1999

전착법(EPD)에 의한 음극지지형 SOFC 단전지용 전해질 제조를 위하여 NiO-YSZ 다공성 기판 위에 극성이 서로 다른 전착용액을 사용하여 안정화 지르코니아 균일막 형성을 위한 전착조건과 막특성을 조사하였다. 알콜계 용액과는 달리 수계 용액에서 정전류, 0.138mA/$\textrm{cm}^2$이상에서 전극반응으로 생성한 기포에 의한 막결함이 생성하였으며 막무게 증가율이 감소하였다. 균일막 형성은 알콜계 용액에서 전극반응없이 안정한 전압특성을 보이는 정전류 0.035 mA/$\textrm{cm}^2$를 10초간 인가하였을 때 얻어졌다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.209.2-209.2
• /
• 2016

Up to now, Plasma applications are thought as a leading technology in industrial, chemical and even medical and biological field. Especially, Due to direct discharge in liquid with reaction in ambient solution, plasma in liquid is useful plasma technology. Such as electro-surgery, water purification, radical generation for synthesis. For using those plasma applications efficiently, plasma characteristics should be understood in advance. But discharge in liquid is not much well-known about its characteristics. And plasma discharge in solution is difficult to generate and analysis due to electrolysis, vaporization and radical generation. So, We make stable plasma discharge in solution(saline 0.9%) without input gas. We also analyze new type of plasma source in thermal and electrochemical view. And we check characteristics of plasma in liquid. For example, plasma density and radical density(OH) with optical emission, thermal energy with thermometer, electrical energy with oscilloscope and so on. And we try to explain the bubble and plasma formation with circuit analysis.

• 한국식품영양과학회지
• /
• 제27권6호
• /
• pp.1053-1058
• /
• 1998

Volatile flavor compounds in salt fermented big eyed herring were analyzed by vacuum simultaneous distillation solvent extraction/gas chromatography/mass spectrometry/olfactometry and aroma extract dilution anlaysis. A total of 44 volatile compounds were detected by GC/O analysis. Of these, 23 were positively identified, and composed of aldehydes(7), esters(5), ketones(4), sulfur containing compounds (3), aromatic hydrocarbons(2), alcohol(1) and nitrogen containing compound(1). Predominant odorants (Log3FD$\geq$5) in sample were ethyl butanoate(bubble gum /sweet candy-like), 3 methylbutyl butanoate (almond /nutty), 1 octen 3 one(earthy/mushroom like), (E,E) 2,6 nonadienal(roasted wheat/grainy), dimethyl trisulfide(soy sauce /cooked cabbage like), 2 acetylpyrazine(nutty/baked potato like) and unidentified compound(RI=1867, seaweed like).

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.464-471
• /
• 2002

Porosity formation in partial penetration welds by high power lasers is a serious problem in industry. There are two main causes that induce porosity formation. One form of porosity is due to gases (e.g. hydrogen, oxygen) dissolving into the weld pool because of the high temperature and then the rapid solidification traps gases as a bubble in the weld metal. The second problem is voids formed by the keyhole collapsing due to unstable keyhole fluid dynamics. The voids that form at the bottom of the keyhole are relatively large and irregular in shape compared to the gas bubbles; this void formation is the primary concern in this paper. The reduction of voids formed by keyhole collapse is achieved by improving the stability of keyhole. Two methods to improve keyhole stability are discussed in this paper: pulse modulation and beam incident angle. Pulse modulation of the laser beam was performed between 100 Hz and 500 Hz to find out the optimum frequency for the keyhole dynamics. The incident beam angle changed the impact angle of the laser beam to the work surface in a range of 0 to 25 degrees. Glycerin in a semi-solidified state is used as a medium for performing the welding because its transparency allows of visualization of the keyhole.

• Journal of Chest Surgery
• /
• 제15권2호
• /
• pp.259-265
• /
• 1982

We have designed a new type of bubble oxygenator (KOREA-KIM VENOTHERM OXYGENATOR) made of PVC sheet and deforming mesh incorporated in the heat exchanger, and evaluated in experimental animal for the analysis of it`s efficiency. The Oxygenator has low priming volume with high flow rate up to 6 L/rain, and efficiency of heat exchanger was excellent as 1-$1.5^{\circ}C.$ using total cardiopulmonary bypass method under moderate to deep hypothermia. Average priming volume of 1317 ml with 30% hemodilution method was perfused with an average of 1.1-3.0 L/min.$M^2$of arterial blood and pure oxygen at a rate of 2-3.4 L/min for 49.6 minutes continuously in average. During total cardiopulmonary bypass, average $PaO_2$ was $159.8{\pm}60$mmHg, $PaCO_2$ $41.0{\pm}3$mmHg respectively under $SaO_2$ over 96% with systolic arterial pressure of 70 mmHg and CVP of 5-10 cm$H_2O$. Plasma free Hemoglobin was $7.0{\pm}4$ mg/dl with 25% drop of hemoglobin and hematocrit at the end of cardiopulmonary bypass. This KKV Oxygenator was observed to have excellent capabillty of oxygen and carbon dioxide gas transfer with small amount of blood trauma, and the efficiency of heat exchanger was satisfactory during cooling and rewarming of the bubbled blood. Disadvantages have included the somewhat poor deforming effect due to loose PVC fiber mesh, the extracompact character of Teflon filters, and the rough inner surface of the heat exchanger copper pipes.