• 원예과학기술지
• /
• 제31권1호
• /
• pp.117-122
• /
• 2013

본 실험은 경실 종자인 잇꽃의 종자구조와 발아특성을 밝히고자 수행하였다. 잇꽃 종자의 외형적 특징은 단단한 종피 표면에 제(hilum)와 주공(micropyle)이 있으며, 제는 종자의 발달과정에서 태좌와 연결되어 있었고, 주공은 암술대와 연결되어 있었던 부분이다. 종자 침종 후 2-3시간 후에 제의 표면이 열렸으며, 발아 시 유아(embryo)가 제를 뚫고 돌출되었다. 잇꽃 종자의 흡습 전에 제와 주공에 파라핀을 처리하여 밀봉한 결과, 제 부위를 밀봉한 처리에서 종자의 발아가 이루어지지 않아 잇꽃 종자의 수분과 산소 교환이 제를 통하여 이루어진다는 것을 확인하였다. 잇꽃 종자의 제가 물에 잠기도록 수분을 공급한 발아실험(top of paper method)에서는 $15^{\circ}C$에서 31.3%, $20^{\circ}C$에서 15.7%, 그리고 $25^{\circ}C$에서 6.0%가 발아하였으며, between-paper method에 의한 실험에서는 $15^{\circ}C$에서 45.5%, $20^{\circ}C$에서 30.0%, $25^{\circ}C$ 14.0%로 발아율이 나타났고, 토양에 파종한 종자는 온도에 관계 없이 80% 내외의 발아율을 보여, 잇꽃 종자의 발아에 수분공급 조건과 온도가 밀접하게 연관되어 있었다. 제(hilum)의 내부 구조를 SEM(scanning electron microscope)을 이용하여 관찰한 결과 도관요소를 구성하는 세포로 이루어져 있었다. 이러한 결과로 볼 때, 잇꽃 종자의 제(hilum)는 발아과정에서 수분흡수와 가스교환 통로가 되는 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.491-497
• /
• 2002

In the present study, a new wood boiler was developed through the performance test. The efficiency of the boiler was obtained up to about 63.7%, which is 67% higher than that of conventional wood boiler, about 38.2%. The structure of the new boiler is more complicated than the conventional boiler. The passage of combustion gas is sufficiently long to exchange heat well with heating water. Therefore, the obtained efficiency is so high, and the temperature of exhaust gas was lower than 200$^{\circ}C$, which is as low as that of light oil boiler. The composition of exhaust gas was measured, and the CO gas concentration was obtained more than 3000 ppm. So, it seems that more study is needed to lower the concentration of CO gas.

• 한국가스학회지
• /
• 제6권1호
• /
• pp.92-97
• /
• 2002

가스흡수식 냉온수기의 작동매체로 사용되고 있는 LiBr 수용액 중에서 열교환기 세관용 재료인 동 세관 및 동합금재인 큐프로니켈 세관의 부식특성에 관한 연두를 하기 위하여 $62\%$ LiBr 수용액 중에서 각 재료에 대한 전기화학적 분극실험을 실시하여 부식특성을 고찰한 결과 다음과 같은 결론을 얻었다 1) 열교환기 세관재의 분극저항은 $30\%$ 큐프로니켈 세관 > $10\%$ 큐프로니켈 세관 > 동 세관의 순으로 높게 나타난다 2) 큐프로니켈 세관의 개로전위는 동 세관보다 귀전위화되면서 부식전류밑도는 더 억제된다 3) $30\%$ 큐프로니켈 세관의 부동태 영역은 $10\%$ 큐프로니켈 세관보다 전위구간이 더 크게. 나타나면서 부동태유지 전류밀도는 더 낮아진다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.96.2-96.2
• /
• 2011

Water transport through the microporous membrane was modeled considering capillary condensation as well as capillary flow in porous media as a function of pore diameter and relative humidity at the surface. The present model was adopted by the numerical simulation of non-isothermal, non-homogenous flow in a shell and tube typed gas to gas membrane humidifier for PEMFC (proton exchange membrane fuel cell) and the result shows good agreement with experimental data.

• 한국환경농학회지
• /
• 제27권4호
• /
• pp.389-394
• /
• 2008

The ecophysiological changes occurring upon cold stress were studied using cold tolerant transgenic and wild-type tobacco plants. In a previous study, cold tolerance in tobacco was induced by the introduction of a gene encoding the zinc finger transcription factor, PIF1. Gas-exchange measurements including net photosynthesis and stomatal conductance were performed prior to, in the middle of, and after a cold-stress treatment of $1{\pm}2^{\circ}C$ for 96 h in each of the four seasons. In both transgenic and wild-type plants, gas-exchange parameters were severely decreased in the middle of the cold treatment, but had recovered after 2-3 h of adaptation in a greenhouse. Most t-test comparisons on gas-exchange measurements between the two plant types did not show statistical significance. Wild-type plants had slightly more water-soaked damage on the leaves than the transgenic plants. A light-response curve did not show any differences between the two plant types. However, the curve for assimilation-internal $CO_2$ in wild-type plants showed a much higher slope than that of the PIF1 transgenic plants. This means that the wild-type plant is more capable of regenerating Ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco) and has greater electron transport capacity. In conclusion, cold-resistant transgenic tobacco plants demonstrated a better recovery of net photosynthesis and stomatal conductance after cold-stress treatment compared to wild-type plants, but the ecophysiological recoveries of the transgenic plants were not statistically significant.

• 한국토양비료학회지
• /
• 제43권2호
• /
• pp.242-251
• /
• 2010

이 논문은 장기간에 걸쳐 논 생태계에서 측정된 이산화탄소와 메탄의 순교환량 과 이와 동시에 모니터링된 다양한 환경요소들과의 상관관계들을 살펴보고, 이들 플럭스와 환경 요소 및 생태계 요소들이 어떻게 교환된 이산화탄소와 메탄의 동위원소비에 영향을 미치는 지를 파악하고자 하였다. 생육기간 동안 관측된 이산화탄소 및 메탄의 순교환량은 는 담수기에는 각각 일사량과 토양온도의 변화에 따라 경시적인 변화를 보였으나, 낙수기를 전후해서는 토양에 저장되어 있던 가스들이 낙수 후 확산장벽이 사라짐으로 인해 급격히 대기 중으로 대량 방출되는 경향을 보였다. 이러한 플럭스의 변화는 토양 중에 저장되어 있는 이산화탄소와 메탄의 저장량 감소와 직접적으로 연결되었고, 이에 상응하는 순교환량 중 토양의 기여분 증가와 대기 중 이산화탄소 및 메탄의 농도 증가 및 동위원소비 변화가 관찰되었다. 이러한 변화는 환원상태에서 진행되는 메탄생성의 결과로, 기질인 이산화탄소는 상대적으로 무거운 $^{13}C$ 동위원소가 축적되는 반면, 생성물인 메탄은 가벼운 $^{12}C$ 동위원소가 축적되기 때문으로 판단된다. 따라서, 토양 유래 이산화탄소는 식물체 호흡 유래 이산화탄소와 구분되는 동위원소 특성을 지내게 된다. Keeling plot 혼합 모델로 추정된 이산화탄소와 메탄의 가스교환 동위원소 지문은 담수기와 낙수기에 걸쳐 매우 뚜렷한 변화를 보였으며, 그 변화 정도는 토양 중 가스 저장량, 교환된 플럭스의 크기 및 방향, 이동 경로, 부분적인 방출 이산화탄소의 재흡수도, 메탄의 산화정도 등에 의해 크게 달랐다. 본 연구의 결과들은 자연상태에서 관측된 플럭스와 결합된동위원소 기술이 생태계 내 다양한 가스 교환 메커니즘을 이해하는데 매우 유용한 도구가 될 수 있음을 보여주였다.

• Journal of the korean society of oceanography
• /
• 제38권3호
• /
• pp.135-142
• /
• 2003

Gas flux across the air-sea interface is often determined by the product of gas transfer velocity k) and the difference of concentrations in water and air. k is primarily controlled by wind stress on the air-sea interface, thus all parameterizations ofk involve wind speed, a rough indicator of wind stress, as one of the independent variables. We attempted to explore the spatial and temporal variations of k in the East (Japan) Sea using a database from Naet al. (1992). Three different parameterizations were employed: those of Liss and Merlivat (1986), Wanninkhof(1992), and Wanninkhofand McGillis (1999). The strong non-linear dependence of k on wind speed in all parameterizations leads us to examine the effect of time resolution, in which the binned wind speeds are averaged, on the estimation ofk. Two time resolutions of 12 hours (short-term) and one month (long-term) were chosen. The mean wind speeds were fed into the given parameterizations, resulting in six different transfer velocities of $CO_2$ ranging from 12 to 32 cm/h. In addition to the threefold difference depending on the choice of parameterization, the long-term average of wind speed results in a value ofk up to 20% higher than the short-term (12 hours) average of wind speed due to the non-Rayleigh wind distribution in the East (Japan) Sea. While it is not known which parameterization is more reliable, this study proposes that the time-averaged wind speed should not be used in areas where non-Ralyleigh wind distribution prevails such as the East (Japan) Sea. The net annual $CO_2$ flux was estimated using the value of k described above and the monthly ${\Delta}fCO_2$ of Oh et al. (1999); this ranges from 0.034 to 0.11 Gt-C/yr.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3377-3382
• /
• 2007

In proton exchange membrane fuel cell, the heat is generated at the catalyst layer as result of exothermic electrochemical reaction. This heat increases temperature of gas diffusion layer and membrane whose conductivity is very sensitive to humidity, function of temperature. So it is very important to analysis heat transfer through fuel cell to maintain temperature at specified range. In this paper numerical simulation was done including reversible, irreversible, ionic resistance, water formation loss to source term of energy equation. Results show that irreversible and water formation loss contributes mainly to energy source term and as current density increases, all of energy source terms become increased and Nusselt number is increased as results of more heat generation. Particularly irreversible loss is found to be predominant among the all energy source and water formation at cathode channel influences the temperature distribution of fuel cell greatly.

• 센서학회지
• /
• 제25권3호
• /
• pp.213-217
• /
• 2016

The superhydrophobic and superoleophobic meshes surfaces have been used in various applications such as self-cleaning, anti-icing, gas exchange, oil-water separation, sound-wave penetrable anti-wetting structures, etc. In particular, there are many studies for oil-water separation with environmental issues. Because of high pressure and dynamic environment, oil-water separation filters must have stable surface properties as super-hydrophobicity and superoleophobicity. The oleophobicity of surface depends on the surface chemistry and roughness of the surface. The roughness of oleophobic surface enhances its static contact angle and stability. The multi-scale hierarchical structure provides a stable superhydrophobic state by maintaining a Cassie state. In this research, we fabricated a superoleophobic mesh with a multi-scale hierarchical structure to increase the pressure resistance and adjusted a size of the mesh hole.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.239-239
• /
• 2017

The enhancement of leaf photosynthetic capacity can have the potential to improve the seed yield of soybean. Key targets for the increase of leaf photosynthetic capacity remains unclear in soybean. Peking, Chinese local variety, has been the useful material for soybean breeding since it shows various resistances against biotic and abiotic stress. Sakoda et al., 2017 reported that Peking had the higher capacity of leaf photosynthesis than Enrei, Japanese elite cultivar. They identified the genetic factors related to high photosynthetic capacity of Peking. The objective of this study is to elucidate the physiological basis underlying high photosynthetic capacity of Peking. Peking and Enrei were cultivated at the experimental field of the Graduate School of Agriculture, Kyoto University, Kyoto, Japan. The sowing date was July 4, 2016. Gas exchange parameters were evaluated at the uppermost fully expanded leaves on 43, 49, and 59 days after planting (DAP) with a portable gas exchange system, LI-6400. The leaf hydraulic conductance, $K_{leaf}$, was determined based on the water potential and transpiration rate of the uppermost fully expanded leaves on 60 DAP. The morphological traits related to leaf photosynthesis were analyzed at the same leaves with the gas exchange measurements. The light-saturated $CO_2$ assimilation rate ($A_{sat}$) of Peking was significantly higher than that of Enrei at 43 and 59 DAP while the stomatal conductance ($g_s$) of Peking was significantly higher at all the measurements (p < 0.05). It suggested that high $A_{sat}$ was mainly attributed to high $g_s$ in Peking. $g_s$ is reported to be affected by the morphological traits and water status inside the leaf, represented by $K_{leaf}$, in crop plants. The tendency of the variation of the stomatal density between two cultivars was not consistent throughout the measurements. On the other hand, $K_{leaf}$ of Peking was 59.0% higher than that of Enrei on 60 DAP. These results imply that high $g_s$ might be attributed to high $K_{leaf}$ in Peking. Further research is needed to reveal the mechanism to archive high $g_s$ on the basis of water physiology in Peking. The knowledge combining the genetic and physiological basis underlying high photosynthetic capacity of Peking can be useful to improve the biomass productivity of soybean.