• 대한수학회보
• /
• 제47권2호
• /
• pp.433-442
• /
• 2010

$\tilde{G}(P,\;Q)$, a new generalization of the set of gap numbers of a pair of points, was described in [1]. Here we study gap numbers of local subring $R\;=\;\cal{K}\;+\;C$ of algebraic function field over a finite field and we give a formula for the number of elements of $\tilde{G}(P,\;Q)$ depending on pure gaps and R.

• 설비공학논문집
• /
• 제9권3호
• /
• pp.312-322
• /
• 1997

The natural convective flow in a two-dimensional square enclosure with horizontal partitions is investigated numerically. The enclosure was composed of the lower hot and the upper cold horizontal walls and the adiabatic vertical walls, and two identical partitions were positioned perpendicularly at the mid-height of the right and left walls, respectively. The governing equations are solved by using the finite element method with Galerkin method. Calculations are made for different partition lengths, partition conductivites, and Rayleigh numbers based on the temperature difference between two horizontal walls and the enclosure height with water(Pr=4.95). An oscillatory motion of the natural convective flow is affected significantly by the variation of the gap width and Rayleigh number. When the gap width is comparatively short, the heat transfer rate is raised with the increase of the thermal conductivity of partitions. However, for sufficiently large gap widths at higher Rayleigh numbers, the average Nusselt numbers of the conductive partitions are smaller than those of the adiabatic partitions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.116-118
• /
• 1998

This paper describes a basic structure, analysis of characteristics and test method for high speed axial-gap BLDC motor. The newly designed axial-gap BLDC motor has 2-stator disks with 3-rotor disks and is easy to increase power capacity by increasing the numbers of stator/rotor disks. For high speed operating, the rotor is composed of light and strong strength material and has several separated magnets to reduce stress concentraction by centrifugal force.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1075-1081
• /
• 2011

이중벽관 증기발생기에서 전열관의 내관과 외관 사이의 틈새에 채워진 헬륨가스의 압력변동으로 전열관의 파손을 감지하는 방법이 개발되고 있다. 이 현상을 모사하기 위해 압력으로 밀착된 두 평판사이의 미세한 틈새에서의 누설률을 측정하여 실험식을 개발하였다. 이 실험식에서는 틈새의 간격과 유동마찰계수가 표면조도에 의해 상호 결합된 형태로 기술되는데, 간단한 평판접촉 모델을 사용하여 유동마찰계수 식을 분리하였다. 이 실험식과 균열에서의 누설률 예측에 사용되고 있는 기존의 유동마찰계수 관련 실험식들을 상호 비교하였다. 레이놀즈 수의 적용범위가 상이함에도 불구하고 개발한 실험식이 0.1~0.35 에서는 레이놀즈 수가 높은 경우에 적용되는 실험식들과 유사한 값을 보였다.

• 전기의세계
• /
• 제21권4호
• /
• pp.22-26
• /
• 1972

The vibration of power lines in rainy environments was researched using the concentric cylindrical gap to which D.C. voltage was applied. Consequently, it has been solidly conformed that the vibration of power lines begins at threshold voltage of corona, and that the amplitude of the vibration increases as the numbers of falling water drop per unit time increase. The vibration phenomen take place in straight line, elliptic or circular motion as voltage is applied the numbers of vibration nearay accord with the elastic vibrarion theory.

• 대한기계학회논문집B
• /
• 제20권6호
• /
• pp.2046-2056
• /
• 1996

The constrained melting inside an isothermally heated horizontal cylinder has been repeatedly investigated in many studies only for the moderate Rayleigh numbers. This study extends the range of Rayleigh numbers to systematically investigate the transition during melting processes, especially focusing on the complex multi-cellular flow pattern and thermal instability. The enthalpy-porosity formulation, with appropriate source terms to account for the phase change, is employed. For low Rayleigh numbers, initially developed single-cell base flow keeps the flow stable. For moderate Rayleigh numbers, even small disturbances in balance between thermal buoyance force and viscous force result in branched flow structure. For high Rayleight numbers, Benard type convection is found to develop within a narrow gap between thee wall and the unmelted solid. The marginal Rayleigh number and the corresponding wave number are in excellent agreement with those from linear stability theory.

• ETRI Journal
• /
• 제39권4호
• /
• pp.546-557
• /
• 2017

In a long term evolution-advanced (LTE-A) system, the traffic overload of machine type communication devices is a challenge because too many devices attempt to access a base station (BS) simultaneously in a short period of time. We discuss the challenge of the gap between the theoretical maximum throughput and the actual throughput. A gap occurs when the BS cannot change the number of preambles for a random access channel (RACH) until multiple numbers of RACHs are completed. In addition, a preamble partition approach is proposed in this paper that uses two groups of preambles to reduce this gap. A performance evaluation shows that the proposed approach increases the average throughput. For 100,000 devices in a cell, the throughput is increased by 29.7% to 114.4% and 23.0% to 91.3% with uniform and Beta-distributed arrivals of devices, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.62-70
• /
• 2009

In this paper, the fluid flow behavior past a pair of rectangular cylinders placed in a two dimensional horizontal channel has been investigated using Lattice-Boltzmann Method(LBM). The LBM has built up on the D2Q9 model and the single relaxation time method called the Lattice-BGK(Bhatnagar-Gross-Krook)model. Streamlines, velocity, vorticity and pressure contours are provided to analyze the important characteristics of the flow field for a wide range of non dimensional parameters that present in our simulation. Special attention is paid to the effect of spacing(d) between two cylinders and the blockage ratio A(=h/H), where H is the channel height and h is the rectangular cylinder height. for different Reynolds numbers. The first cylinder is called upstream cylinder and the second one as downstream cylinder. The downstream fluid flow fields have been more influenced by its blockage ratios(A) and Reynolds numbers(Re) whereas the upstream flow patterns(in front of downstream cylinder) by the gap length(d) between two cylinders. Moreover, it is observed that after a certain gap, both upstream and downstream flow patterns are almost similar size and shape. The simulation result has been compared with analytical solution and it is found to be in excellent agreement.

• The Korean Journal of Ecology
• /
• 제23권1호
• /
• pp.1-8
• /
• 2000

충북 제천시 소재 월악산 문수봉의 신갈나무림에서 gap연령이 다른 3개 지소와 성숙림인 1개 지소로 나누어 gap내 신갈나무의 재생과정을 밝혀 다음과 같은 결과를 얻었다. 식생조성은 gap형성 초기 에 관목층에서는 조록싸리, 물푸레나무, 미역줄나무, 신갈나무, 국수나무 등의 우점도가 높았다 특히, 관목층 전체를 볼때 gap형성 초기에는 개체수가 상당히 많으나 gap 연령이 증가할 수록 교목층을 형성 할 수 있는 신갈나무와 물푸레나무 등의 기저면적의 증가에 의한 피음으로 관목층의 개체수는 감소하였다. gap내에는 어린 개체가 많고 점차 감소하는 역 J자형의 분포를 나타내고 gap 연령이 증가하면서 gap내에서 급속한 성장으로 교목층을 형성하는 신갈나무의 피음에 의해 부분적으로 고사된 개체가 나타나는 것 을 볼 수 있.었다. 성숙림 에서는 어린 개체가 거의 없었으나 수령이 130년 이상인 개체가 주로 나타났고 이 들 중 한개 또는 그 이상의 개체가 어떤 교란요인에 의해서 Gap이 형성되면 이곳에 어린개체가 침입되어 재생이 이루어질 것으로 생각된다. 본 신갈나무림은 gap형성 후 gap 내에 침입한 신갈나무가 교목층을 형성하는 연령인 약 35∼40년 이후 부터 수령이 130∼330년 되는 성숙림까지 다른 신갈나무 유묘의 침입은 없지만 다른 수종으로 대치되는 것이 아니라 성숙림의 gap형성에 의해 불연속적인 재생으로 계속 유지되는 것으로 생각된다.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1262-1275
• /
• 1993

본 연구에서는 가동형 분할판을 실린더 후단부로 부터 일정간격 이격시켜 설 치하여, 실린더 바로 후방의 압력에 의한 불안정한 모멘트가 분할판에 직접 작용하지 않도록 하되 와동의 상호 작용은 계속 억제할 수 있도록 설계된 가동형 분할판을 이용 하여 이의 항력 저감효과를 풍동실험을 통하여 조사하였다.