• Title/Summary/Keyword: gap k-joint

Search Result 129, Processing Time 0.029 seconds

A Study on Stress Assessment of Standing Gas Pipeline Subjected to Ground-Subsidence (지반 침하를 고려한 도시가스 입상배관의 응력평가)

  • Kil, Seong-Hee;Kim, Byung-Duk;Kwon, Jeong-Rock;Yoon, Kee-Bong
    • Journal of the Korean Institute of Gas
    • /
    • v.17 no.2
    • /
    • pp.1-8
    • /
    • 2013
  • In this study, 120 cases of damage due to ground subsidence of city gas pipeline which is hanging on apartment outer wall were investigated. From the survey results, it was determined to be approximately 100m~200mm ground subsidence occurred and at severe damage, pipeline was cut and the gap was about 50mm between two cut pipeline. Device for measuring the amount of deformation of standing gas pipeline was designed and fabricated. And installed it on apartment outer wall for measuring the deformation due to ground subsidence, after 5 months measurement the amount of ground subsidence was measured to 1.3mm. Stress assessment was conducted based on results of ground subsidence occurred on standing gas pipeline.

A Study of the Relation between Food Habits , Anthropometric and Clinical Data in a Health Promoting Elementary School in Changwon (창원시 건강증진 시범학교 일부 아동의 식습관 , 체격지수 , 혈액성상에 관한 연구)

  • Lee, Gap-Yeon;Ju, Jeong;Lee, Bu-Ok
    • Journal of the Korean Dietetic Association
    • /
    • v.7 no.4
    • /
    • pp.331-348
    • /
    • 2001
  • The purpose of this study was to obtain basic data for nutrition education of the children in a health promoting elementry school. The data was collected by a questionaire of food habits, and anthropometric measurement and biochemical test in comparison with obesity index. The study subjects were boys and girls aged 10 to 12 years who participated in the “99 Children Nutrition Camp”. The average obesity index was 1.7$\pm$21.6% in boys and -11.4$\pm$12.6% in girls. After school, major leisure items were significnatly different by gender but both boys and girls played mainly computer game. In concern for body image and eating habits, girls had more concern and girls had attempted weight control more than boys. 80.2% of subjects had prejudice for special food, especially, all subjects in the severely underweight group had prejudice. But this tendency was significantly decreased with the increasing obesity index. The lowest preferency was for vegetables(64.4%). The tendency of prejudice of subjects was higher whose mother are thirties than those of subjects whose mother are in fourties. The serum GOT and GPT values were significantly higher in overweight and obese group than the other groups. The only serum T-chol was significantly higher in boys than in girls. The number of risk factors related to coronary heart disease(CHD) based on coresponding criteria of TG, T-chol, HDL-chol, and LDL-chol was not increased significantly with the degree of obesity index. The results indicated the need of nutritional management for the children. At a point of view, to educate children early who are able to change food habits and life-styles means to help heathy growth and to deliver up heathy adults. Active nutrition education for both children and mothers will be recommended with joint participation of nutritionists in community public health center and elementary school.

  • PDF

An Experimental Study on GHG Emissions Reduction and Fuel Economy Improvement of Heavy-Duty Trucks by Using Aerodynamics Device Package (공기저항 저감장치 패키지를 이용한 대형화물차량의 연비개선 및 온실가스 저감효과에 관한 실험적 연구)

  • Park, Seungwon;Dong, Lang;Her, Chulhaeng;Yun, Byoeunggyu;Kim, Daewook
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.25 no.2
    • /
    • pp.207-218
    • /
    • 2017
  • Improving fuel consumption, particularly that of commercial vehicles, has become a global concern. The reduction in logistics cost has been a key issue in efforts to improve fuel economy and efficiency of transportation equipment. Typical technologies for reducing reduce fuel usage include air resistance reduction technologies, tire rolling resistance technologies, and idle technologies among others. Air resistance technology is a highly effective method that can be easily applied in a short period. As with air resistance technology, several devices involving side skirt, boat tail and gap fairing have been developed based on an analytical 3-D modeling technique for reducing air resistance attributed to the vehicle configuration. The devices were on a 45 feet tractor-trailer and the emission test was done using PEMS equipment. Fuel economy was evaluated by introducing several devices to reduce outer air resistance. The test was conducted by changing the experimental method of SAE J1321 Joint TMC/SAE Fuel Consumption Test Procedure - Type II test. As a result, air resistance decreased by at least 15 % and fuel economy improved by at least 13 %. This study sought to reduce greenhouse gas and improve fuel economy by applying several devices to a test vehicle to lower air resistance.

A comparative study on the fit and screw joint stability of ready-made abutment and CAD-CAM custom-made abutment (기성 지대주와 맞춤형 CAD-CAM 지대주의 적합 및 나사 안정성 비교)

  • Kim, Jong-Wook;Heo, Yu-Ri;Kim, Hee-Jung;Chung, Chae-Heon
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.51 no.4
    • /
    • pp.276-283
    • /
    • 2013
  • Purpose: The purpose of this study was to investigate the fit and screw joint stability between Ready-made abutment and CAD-CAM custom-made abutment. Materials and methods: Osstem implant system was used. Ready-made abutment (Transfer abutment, Osstem Implant Co. Ltd, Busan, Korea), CAD-CAM custom-made abutment (CustomFit abutment, Osstem Implant Co. Ltd, Busan, Korea) and domestically manufactured CAD-CAM custom-made abutment (Myplant, Raphabio Co., Seoul, Korea) were fabricated five each and screws were provided by each company. Fixture and abutments were tightening with 30Ncm according to the manufacturer's instruction and then preloding reverse torque values were measured 3 times repeatedly. Kruskal-Wallis test was used for statistical analysis of the preloading reverse torque values (${\alpha}=.05$). After specimens were embedded into epoxy resin, wet cutting and polishing was performed and FE-SEM imaging was performed, on the contact interface. Results: The pre-loading reverse torque values were $26.0{\pm}0.30Ncm$ (ready-made abutment; Transfer abutment) and $26.3{\pm}0.32Ncm$ (CAD-CAM custom-made abutment; CustomFit abutment) and $24.7{\pm}0.67Ncm$ (CAD-CAM custom-made abutment; Myplant). The domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) presented lower pre-loading reverse torque value with statistically significant difference than that of the ready-made abutment (Transfer abutment) and CAD-CAM custom-made abutment (CustomFit abutment) manufactured from the same company (P=.027) and showed marginal gap in the fixture-abutment interface. Conclusion: Within the limitation of the present in-vitro study, in domestically manufactured CAD-CAM custom-made abutment (Myplant abutment) showed lower screw joint stability and fitness between fixture and abutment.

Distributed BS Transmit Power Control for Utility Maximization in Small-Cell Networks (소형 셀 환경에서 유틸리티 최대화를 위한 분산화된 방법의 기지국 전송 전력 제어)

  • Lee, Changsik;Kim, Jihwan;Kwak, Jeongho;Kim, Eunkyung;Chong, Song
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.38A no.12
    • /
    • pp.1125-1134
    • /
    • 2013
  • Small cells such as pico or femto cells are promising as a solution to cope with higher traffic explosion and the large number of users. However, the users within small cells are likely to suffer severe inter-cell interference (ICI) from neighboring base stations (BSs). To tackle this, several papers suggest BS transmit power on/off control algorithms which increase edge user throughput. However, these algorithms require centralized coordinator and have high computational complexity. This paper makes a contribution towards presenting fully distributed and low complex joint BS on/off control and user scheduling algorithm (FDA) by selecting on/off pattern of BSs. Throughput the extensive simulations, we verify the performance of our algorithm as follows: (i) Our FDA provides better throughput performance of cell edge users by 170% than the algorithm without the ICI management. (ii) Our FDA catches up with the performance of optimal algorithm by 88-96% in geometric average throughput and sufficiently small gap in edge user throughput.

Effect of strengthening and elongation exercises of upper extremity muscle to forward head posture correction

  • Lee, Jun Cheol
    • International journal of advanced smart convergence
    • /
    • v.7 no.1
    • /
    • pp.33-41
    • /
    • 2018
  • This study was designed to provide basic data for developing exercise program that helps correcting posture by knowing the effect of strengthening and elongation exercises of upper extremity muscle to forward head posture correction. In this study determined subjects whether they had forward head posture or not. On the basis of the New York state posture rating, if a subject's posture is match up with the normal standard posture, gives 5 points and if the posture is slightly get out of the normal standard posture, gives 3 points and if the posture is apparently get out of the standard, gives 1 points. When determining the forward head posture, if talus, humerus and outer ear center are on the same line, it is determined as normal and if outer ear center is off the line less than 1.0cm, it is a slight deformation and if outer ear center is off the line more than 1.0cm, it is a high deformation. In the study selected people who have more than 1 cm gap between two vertical lines start from outer ear center and acromion separately as subjects. Length between the ideal alignment line measured by using goniometer and temporal region showed statistically significant decrease as $2.36{\pm}1.07cm$ before the intervention and $1.06{\pm}0.88cm$ after the intervention. After 4 weeks of neck and chest extensor muscle exercise, the group who exercised both showed increase in range of neck joint motion and neck flexion of the forward head posture. Meanwhile the group who only exercised neck extensor muscle only and the group who only exercised chest extensor muscle didn't showed statistically significant result. That only the group who exercised both muscles showed significant result is the different with studies before. Because this study didn't target patient who had a lesion, couldn't compare effect of the conservative manner and exercise. However, this study provides the fact that the group who exercised both neck and chest muscle had more effect than the control group.

CLINICAL STUDY ON THE ETIOLOGY, DIFFERENTIAL DIAGNOSIS AND TREATMENT OF TRISMUS (개구장애 환자의 병인, 감별진단 및 치료방식에 대한 임상연구)

  • Kang, Hee-Jea;Hwang, Dae-Seok;Kim, Yong-Deok;Shin, Sang-Hun;Kim, Uk-Kyu;Kim, Jong-Ryoul;Chung, In-Kyo
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • v.32 no.6
    • /
    • pp.544-558
    • /
    • 2006
  • Trismus is a common problem to most people experiencing at once in his or her life and to most dental practitioners experiencing frequently. It has a number of potential causes which are single factor or complex factors. Its treatment will depend on the cause. The purpose of this study was to discuss the causes of trismus condition and the various treatments available. This study was made by reviewing of collected data from 86 patients complained of trismus among patients who were diagnosed by TMD, tumor, infection including tetanus, soft tissue anomalies, bony fracture and ankylosis from Jan 2002 to Dec 2004 on department of oral and maxillofacial surgery at Pusan National University Hospital, South Korea. The clinical reviews regarding chief complaints, clinical characteristics, diagnostic examination, treatments and the results on the patients were given as follows. 1. The etiology of trismus commonly were derived from temporomandibular joint(TMJ) disorder, TMJ ankylosis, TMJ tumor, odontogenic maxillofacial infection, mandibular condylar fracture, tetanus. 2. The chief complaints of trismus patients were progressive mouth opening limitation, TMJ pain, malocclusion, facial asymmetry, retrognathic state. 3. Especially, for the differential diagnosis between the fibrous ankylosis and true bony ankylosis, computed tomogram (CT) was useful. Surgical gap arthroplasty on bony ankylosis patients was applied and the gain of mouth opening after operation was average 35.8 mm during 19 months. 4. The tetanus, rarely, also induced the trismus with the range of mouth opening less than 10 mm. The average serum level of tetanus anti-toxin was 0.02-0.04 IU/mL. The limitation of mouth opening was improved into average 38 mm on 4 weeks after injection of 10,000 units of tetanus immune globulin. 5. In the treatment of osteochondroma, TMD, odontogenic infection and fracture, and the others inducing trismus, to obtian the maximum result and decreased inadequate time and effort, it is important to finding the causes from the exact clinical examination and diagnosis.

Effect of Anteromedial Cortex Oblique Angle on Change of Tibial Posterior Slope Angle in High Tibial Osteotomy Using Computer Assisted Surgery (CAS) (Computer Assisted Surgery(CAS)를 이용한 개방형 근위경골절골술 시 전내측피질골경사각이 경골후방경사각에 미치는 영향)

  • Lee, Ho-Sang;Kim, Jay-Jung;Wang, Joon-Ho;Kim, Cheol-Woong
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.36 no.3
    • /
    • pp.351-361
    • /
    • 2012
  • The leading surgical method for correcting the misalignment of the varus and valgus in the knee joint is the high tibial osteotomy (HTO). In the opening wedge HTO (OWHTO), there is no concern about damaging the peroneal nerve on the lateral tibia of the proximal fibula. OWHTO has been the preferred choice, as the opening of the correction angle can be modulated during the operation. The correction of the varus and valgus on the coronal plane are performed adroitly. Nevertheless, there have been numerous reports of unintended changes in the medial tibial plateau and posterior slope angle (PSA). The authors have developed an HTO method using computer-assisted surgery with the aim of addressing the abovementioned problems from an engineer's perspective. CT images of the high tibia were reconstructed three-dimensionally, and a virtual osteotomy was performed on a computer. In addition, this study recommends a surgical method that does not cause changes in the PSA after OWHTO. The results of the study are expected to suggest a clear relationship between the anteromedial cortex oblique angle of each patient and the PSA, and an optimal PSA selection method for individuals.

The Impingement of The Posterior Elbow in The Heavy Workers (중노동자에서 발생된 주관절 후방부의 충돌 병변)

  • Moon, Young-Lae;Lee, Chul-Gap;Kim, Dong-Hui;Lee, Young-Kwan
    • Journal of the Korean Arthroscopy Society
    • /
    • v.9 no.1
    • /
    • pp.60-64
    • /
    • 2005
  • Purpose: To describe the impingement of the osteophyte between the olecranon process and olecranon fossa and to understand the effect of removing the lesion on the elbow extension in heavy workers. Materials and Methods: Arthroscopy was performed to elbow of heavy industrial workers who complained painful limitation of elbow extension.6 patients(Teases) with average age of 43 year were selected. The average ROM showed flexion contracture of $17^{\circ}$ and further flexion of $87^{\circ}$. Results: In all cases, after the operation two months follow up, mean flexion contracture improved from $17^{\circ}\;to\;2^{\circ}$ with further flexion from$87^{\circ}\;to\;122^{\circ}$. After the operation 1 year follow up, the mean flexion contracture was $3^{\circ}$ and further flexion was $113^{\circ}$. Pain relief within acquired range of motion was achieved in all cases and there was no complication in this series. Conclusion: Selective removal of the impingement bony spur for treatment of flexion contracture in the patient with chronic cumulative trauma disorder patients appear to be effective method to control pain, recover joint movement and at] ow early rehabilitation.

  • PDF

Reduction Loss after Extension Block Kirschner Wire Fixation for Treatment of Bony Mallet Finger (골성 추지 신전제한 K 강선 고정술 시행 후 정복소실)

  • Kim, Byungsung;Nho, Jae-Hwi;Jung, Ki Jin;Yun, Keonhee;Park, Eunseok;Park, Sungyong
    • Archives of Hand and Microsurgery
    • /
    • v.23 no.4
    • /
    • pp.239-247
    • /
    • 2018
  • Purpose: We investigated occurrence of reduction loss after extension block (EB) Kirschner wire fixation or additional interfragmentary fixation (AIF) and clinical results including extension lag of the distal interphalangeal joint for treating bony mallet finger. Methods: Forty-six patients were included with a mean follow-up of 28 months (range, 12-54 months). Twenty-seven patients were treated with EB K-wire fixation (Group A) while 19 patients were treated with AIF (Group B). We checked radiologic factors, such as amount of articular involvement, volar subluxation, mallet fragment angle, reduction loss, range of motion including extension lag, and functional outcomes using Crawford's criteria. Results: Reduction loss occurred in eight patients (17%). Differences in mean extension lag, age, preoperative volar subluxation and mallet fragment angle between patients with reduction loss and those with reduction maintaining were significant. However, there were no significant differences in gender, hand dominance, amount of articular involvement, AIF, or further flexion between reduction loss and reduction maintaining. As for patterns of displacement, there was a significant relationship between gap or step-off and extension lag. Using Crawford's evaluation criteria, functional outcomes were excellent in 31, good in 10, fair in 3, and poor in 2 patients. Conclusion: Reduction loss should be careful in older age, smaller mallet fragment angle and preoperative volar subluxation.