• The Journal of Fisheries Business Administration
• /
• v.33 no.1
• /
• pp.69-85
• /
• 2002

Reduction of fishing grounds, which was caused by the recent fisheries agreements between Korea, Japan, and China, Is Increasing the important of coastal fisheries. Korea's coastal fisheries, however, need special management measures owing to the following problems. First, there are too many fishing fleets even though fisheries resources are continuously decreasing. Despite the fact that some of the fishing vessels have been scrapped, there still remain too many vessels and especially approximately 27,000 vessels increased during 1997-1998. Second, as the condition of fisheries resources changed radically, many fishermen are fishing by methods which they were not permitted to. These fishing methods cannot be legally supported and so there is a huge gap between the system and the reality, Third, two or three licenses are given to each coastal fishing vessel because a single license cannot give sufficient income, but some of these are formally acquired. So under such circumstances, efficient management of fisheries is impossible. Fourth, absence of demarcation among regions and industries is causing frequent conflicts and there are concerns about the decreasing fisheries resources due to competitive fishing practices. Therefore, considering the above mentioned problems Korea's coastal fisheries management should be developed as the following: First, new licenses should be limited while expanding the buy-back program. The government is currently planning to limit new licenses by introducing the fixed license number system in coastal fisheries but is somewhat passive about the buy-back program. Second, fisheries management which is based on self-regulation should be established. In order to increase the effect of fisheries management, the fishermen should decide by themselves the fish and fishing methods they would be exploiting and directly regulate them. Third, it is necessary to integrate the licenses of coastal fisheries. Since coastal fisheries management through the license system has distinct limitations, it is preferable to unify risking licenses and let the fishermen decide specific matters on their own. Finally, it is necessary to establish boundaries among the regions and industries. Joint fishing areas among regions(cities and provinces) should be established and fishing in other areas should be permitted on condition of paying the required fees. On the other hand, it is also necessary to permit coastal fishing only within certain distances.

• International journal of advanced smart convergence
• /
• v.7 no.1
• /
• pp.33-41
• /
• 2018

This study was designed to provide basic data for developing exercise program that helps correcting posture by knowing the effect of strengthening and elongation exercises of upper extremity muscle to forward head posture correction. In this study determined subjects whether they had forward head posture or not. On the basis of the New York state posture rating, if a subject's posture is match up with the normal standard posture, gives 5 points and if the posture is slightly get out of the normal standard posture, gives 3 points and if the posture is apparently get out of the standard, gives 1 points. When determining the forward head posture, if talus, humerus and outer ear center are on the same line, it is determined as normal and if outer ear center is off the line less than 1.0cm, it is a slight deformation and if outer ear center is off the line more than 1.0cm, it is a high deformation. In the study selected people who have more than 1 cm gap between two vertical lines start from outer ear center and acromion separately as subjects. Length between the ideal alignment line measured by using goniometer and temporal region showed statistically significant decrease as $2.36{\pm}1.07cm$ before the intervention and $1.06{\pm}0.88cm$ after the intervention. After 4 weeks of neck and chest extensor muscle exercise, the group who exercised both showed increase in range of neck joint motion and neck flexion of the forward head posture. Meanwhile the group who only exercised neck extensor muscle only and the group who only exercised chest extensor muscle didn't showed statistically significant result. That only the group who exercised both muscles showed significant result is the different with studies before. Because this study didn't target patient who had a lesion, couldn't compare effect of the conservative manner and exercise. However, this study provides the fact that the group who exercised both neck and chest muscle had more effect than the control group.

• Transactions of Materials Processing
• /
• v.28 no.3
• /
• pp.145-153
• /
• 2019

The objective of this study is to analyze the mechanical splicing characteristic of the threaded bar according to the contact conditions of the transverse rib. In order to consider the contact conditions of the rib, selection of the main variables including the gap of the core diameter ($l_c$), rib angle (${\theta}$), and the number of contacts ($C_N$) of transverse rib was done. So as to analyze the splicing characteristic of the D51 threaded bar, a finite element (FE) simulation of the tensile test was conducted using the designed D51 threaded bar and coupler. Through FE simulation results, it was verified that the mechanical slicing characteristics varied based on the main design variables ($l_c$, ${\theta}$, and $C_N$). It was further confirmed that it was important to determine the $C_N$ in consideration of $l_c$. Additionally, the tensile test results of the D25 and D51 threaded bar combined with the couplers were similar to FE simulation results. Furthermore, to quantitatively evaluate FE simulation and test results, the calculation equation for the contacted projection area ratio (R) of the transverse rib was proposed. To secure a mechanical splicing joint of the threaded bar, it was established that the R calculated using the proposed equation had to be greater or equal to 40%.

• Structural Engineering and Mechanics
• /
• v.81 no.3
• /
• pp.281-292
• /
• 2022

This study aimed to analyze the dynamic punching shear performance of slab-column joints under cyclic loads with the use of double-hooked end (5D) steel fibers. Structural systems such as slab-column joints are widely found in infrastructures. The susceptibility to collapse of such structures when submitted to seismic loads is highly dependent on the structural performance of the slab-column connections. For this reason, the punching capacity of reinforced concrete (RC) structures has been the subject of a great number of studies. Steel fibers are used to achieve a certain degree of ductility under seismic loads. In this context, 5D steel hooked fibers provide high levels of fiber anchoring, tensile strength and ductility. However, only limited research has been carried out on the performance under cyclic loads of concrete structural members containing steel fibers. This study covers this gap with experimental testing of five different full-scale subassemblies of RC slab-column joints: one without punching reinforcement, one with conventional punching reinforcement and three with 5D steel fibers. The subassemblies were tested under cyclic loading, which consisted of applying increasing lateral displacement cycles, such as in seismic situations, with a constant axial load on the column. This set of cycles was repeated for increasing axial loads on the column until failure. The results showed that 5D steel fiber subassemblies: i) had a greater capacity to dissipate energy, ii) improved punching shear strength and stiffness degradation under cyclic loads; and iii) increased cyclic loading capacity.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.2
• /
• pp.149-155
• /
• 2017

In this research, the surface covered curing method using the double-layered bubble sheet was evaluated. This double-layered bubble sheet has outstanding insulating performance with its low heat conductivity and high economic feasibility with its high durability. However, in the case of wall-typed building construction, the area of exposed rebar is curious on curing performance with the double-layered bubble sheet in spite of the double-layered bubble sheet showed favorable performance for slab. Therefore, in this research, regarding the actually constructed wall-typed apartment building, the most efficient curing method was suggested based on the evaluation of curing performance depending on temperature distribution depending on various location of covered or exposed rebar. As a result, the D method was determined as the most efficient curing method without any concern of early-age frost damage. However, by considering easiness of construction, the B method of covering the pieced double-layered bubble sheet on gap between rebars can be another option of desired result.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.4 no.1
• /
• pp.75-88
• /
• 2003

Objectives : The purpose of this study is to find out the effects of Catalpa Ovata on the collagen-induced arthritis in the lewis rats. and we infere the effects of Catalpa Ovata on the rheumatoid arthritis in the human body. Methods : We investigated the effect of Catalpa Ovata on the Collagen-induced arthritis in Lewis rats via morphology, histology and serology as an experimental group, a control group, and a normal group. We feed Catalpa Ovata. only to an experimental group. Results : According to this research, the abnormal finding In Moire topography was 53.7% (1,018 students), and students needed X-ray re-examination were 11.2% (213 students). Students diagnosed scoliosis by X-ray re-examination were 1.8%. According to statistical analysis, interval between vertical base line of pelvis and vertical base line of neck, gap between left distance and right distance to the vertical base line of pelvis and difference of contour lines have strong correlations with deformity degree of the body surface examined by Moire. Conclusions : 1. The weight of an experimental group were lower than control group with statistically significant at 15 days later. 2, The paw edema volume of an experimental group were lower than control group at 10 days, 15 days later. but couldn't be found meaning. 3. The size of the tarsal joint of an experimental group were lower than control group at 5 days, 10 days, 15 days later, but couldn't be found meaning. 4. The volume of tumor necrosis factor-a at an experimental group were lower than control group with statistically significant. 5. The volume of interleukin-$1{\beta}$ at an experimental group were lower than control group with statistically significant. 6. An experimental group and a control group were showed ankylosing osteoarthritis, but an experimental group compared with a control group, alleviated In the fibrous ankylosis, destruction of articular cartilage and destruction of subchondral bony tissue. According to the above results, it might be considered that Catalpa Ovata has the suppression of the advance of the Collagen-induced arthritis and that result were presumed to bo connected with suppression of volume of the tumor necrosis $factor-{\alpha}$ and $interleukin-1{\beta}$ in the blood.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.351-361
• /
• 2012

The leading surgical method for correcting the misalignment of the varus and valgus in the knee joint is the high tibial osteotomy (HTO). In the opening wedge HTO (OWHTO), there is no concern about damaging the peroneal nerve on the lateral tibia of the proximal fibula. OWHTO has been the preferred choice, as the opening of the correction angle can be modulated during the operation. The correction of the varus and valgus on the coronal plane are performed adroitly. Nevertheless, there have been numerous reports of unintended changes in the medial tibial plateau and posterior slope angle (PSA). The authors have developed an HTO method using computer-assisted surgery with the aim of addressing the abovementioned problems from an engineer's perspective. CT images of the high tibia were reconstructed three-dimensionally, and a virtual osteotomy was performed on a computer. In addition, this study recommends a surgical method that does not cause changes in the PSA after OWHTO. The results of the study are expected to suggest a clear relationship between the anteromedial cortex oblique angle of each patient and the PSA, and an optimal PSA selection method for individuals.

• Asia pacific journal of information systems
• /
• v.18 no.2
• /
• pp.73-94
• /
• 2008

When individuals collaborated in virtual settings, communication is medicated through a variety of communication technologies, and is associated not only with communication effectiveness but also with socio-emotional interactions among group members. In this regards, scholars have examined how technology-mediated communication systems can be designed and used to facilitated communication interaction. However, the empirical results of the previous studies have revealed inconsistencies in the effects of communication media on users' behavioral or attitudinal responses, and on their viable effectiveness in organizations. Some studies claim that computer-mediated communication(CMC) is task-oriented but not suitable for emotional expression since it hinders close interpersonal interaction. On the other hand, some studies argue that individuals are able to develop interpersonal relationships more effectively in a CMC environment than in an FtF-environment. Due to the different perspectives, a theoretical gap exists, and it leads to the inconsistent research findings. The purpose of this paper is to combine the two different perspectives into single unified model, thereby providing a more realistic and comprehensive understanding about virtual collaboration. The present study here sought to answers the following questions with organizational communication perspective: What are the major components of virtual collaboration? What factors affect the performance of virtual collaboration? And what kind of managerial efforts should organization make in order to facilitate CMC media effectiveness in virtual collaboration? Although there is a certain belief that new media, namely technology-mediated communication support would create new opportunities, the problem of "how" or "why" has been an important question that is still not fully addressed. In this regards, we collectively reexamined previous literatures with major issues which are still controversial and integrated various theoretical activity within computer-mediated communication domain: task-oriented approach, socio-emotional approach, and evolutionary psychological approach. Our first contribution is to develop a framework for virtual collaboration by combining two different perspectives into a single unified model, providing a more realistic and comprehensive understanding. The second main contribution is the joint modeling of both social presence and cognitive effort, and the effects on two distinct but important communication outcomes(i.e., take performance and relational development). We tested the research hypotheses which were developed based on the various CMC theories using data gathered through a self-administered mail survey of 127 individuals of 69 virtual workgroups. The proposed model was supported, providing preliminary evidence that the tension between two opposite view should be integrated. The results show that the individual's psychological processes(social presence and cognitive effort) in a virtual environment significantly mediated the effect of CMC inputs (media richness, user adaptation, and shared contest) on the CMC outputs (task performance and relational development). Furthermore, this study shows that the lack of perceived media richness of CMC media can be complemented by user adaptation and shared context. Based on the results, we discuss how communication system should be designed and implemented so as to promote virtual interaction as well as how a virtual workgroup should be composed to complement the lack of media richness. A virtual collaboration using CMC media may create new value by overcoming the logistical constraints. On the other hand, it may also generate various managerial risks such as communicational depersonalization, process dissatisfaction, and low cohesion. Therefore, this study suggests that organization managers should carefully choose the CMC mediums and monitor individual member's cognitive and affective psychological processes during virtual collaboration to reduce potential risks in virtual collaboration.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.128-138
• /
• 2010

In this paper, we propose a new bit assignment scheme for Wyner-Ziv video coding. Distributed video coding (DVC) is a new video coding paradigm which enables greatly low complexity encoding because it does not have any motion prediction module at encoder. Therefore, it is very well suited for many applications such as video communication, video surveillance, extremely low power consumption video coding, and other portable applications. Theoretically, the Wyner-Ziv video coding is proved to achieve the same rate-distortion (RD) performance comparable to that of the joint video coding. However, its RD performance has much gap compared to MC-DCT-based video coding such as H.264/AVC. Moreover, Transform Domain Wyner-Ziv (TDWZ) video coding which is a kind of DVC with transform module has difficulty of exact bit assignment because the entire image is treated as a same message. In this paper, we propose a feasible bit assignment algorithm using adaptive quantization matrix selection for the TDWZ video coding. The proposed method can calculate suitable bit amount for each region using the local characteristics of image. Simulation results show that the proposed method can enhance coding performance.

• Journal of the Korean Arthroscopy Society
• /
• v.9 no.1
• /
• pp.60-64
• /
• 2005

Purpose: To describe the impingement of the osteophyte between the olecranon process and olecranon fossa and to understand the effect of removing the lesion on the elbow extension in heavy workers. Materials and Methods: Arthroscopy was performed to elbow of heavy industrial workers who complained painful limitation of elbow extension.6 patients(Teases) with average age of 43 year were selected. The average ROM showed flexion contracture of $17^{\circ}$ and further flexion of $87^{\circ}$. Results: In all cases, after the operation two months follow up, mean flexion contracture improved from $17^{\circ}\;to\;2^{\circ}$ with further flexion from$87^{\circ}\;to\;122^{\circ}$. After the operation 1 year follow up, the mean flexion contracture was $3^{\circ}$ and further flexion was $113^{\circ}$. Pain relief within acquired range of motion was achieved in all cases and there was no complication in this series. Conclusion: Selective removal of the impingement bony spur for treatment of flexion contracture in the patient with chronic cumulative trauma disorder patients appear to be effective method to control pain, recover joint movement and at] ow early rehabilitation.