• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.33-38
• /
• 1999

In this paper, we combine a generalized analysis-by-synthesis (AbS) structure and an algebraic excitation scheme to propose a new 4kb/s speech codec. This codec partly uses the structure of G.729. We design a line spectrum pair (LSP) quantizer, an adaptive codebook, and an excitation codebook to fit the 4 kb/s bit rate. The codec has a 25㎳ algorithmic delay, which corresponds to a 20㎳ frame size and a 5㎳ lookahead. At the bit rates below 4kb/s, most CELP speech codecs using the AbS principle have a drawback that results a rapid degradation of speech quality. To overcome this drawback we use the generalized AbS structure which is efficient for the low bit rate speech codec. LP coefficients are converted to LSP and quantized using a predictive 2-stage VQ. A low complexity algebraic codebook which uses shifting method is used for the fixed codebook excitation, and gains of the adaptive codebook and the fixed codebook are quantized using the VQ. To evaluate the performance of the proposed codec A-B preference tests are done with the fixed rate 8kb/s QCELP. As the result of the test, the performance of the codec is similar to that of the fixed rate 8kb/s QCELP.

• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.335-341
• /
• 2011

Most sensing and instrumentation systems should have very higher sampling rate than required data rate not to miss important information. This means that the system can be inefficient in some cases. This paper introduces two new research areas about information acquisition with high accuracy from less number of sampled data. One is Compressed Sensing technology (which obtains original information with as little samples as possible) and the other is Super-Resolution technology (which gains very high-resolution information from restrictively sampled data). This paper explains fundamental theories and reconstruction algorithms of compressed sensing technology and describes several applications to geophysical exploration. In addition, this paper explains the fundamentals of super-resolution technology and introduces recent research results and its applications, e.g. FRI (Finite Rate of Innovation) and LIMS (Least-squares based Iterative Multipath Super-resolution). In conclusion, this paper discusses how these technologies can be used in geophysical exploration systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.9
• /
• pp.1513-1527
• /
• 2011

This paper investigates the capacity rate problems for a joint decode-and-forward (JDF) based two-way relaying with network coding. We first characterize the achievable rate region for a conventional three-node network scenario along with the calculation of the corresponding maximal sum-rate. Then, for the goal of maximizing the system sum-rate, opportunistic relay selection is examined for multi-relay networks. As a result, a novel strategy for the implementation of relay selection is proposed, which depends on the instantaneous channel state and allows a single best relay to help the two-way information exchange. The JDF scheme and the scheme using relay selection are analyzed in terms of outage probability, after which the corresponding exact expressions are developed over Rayleigh fading channels. For the purpose of comparison, outage probabilities of the amplify-and-forward (AF) scheme and those of the scheme using relay selection are also derived. Finally, simulation experiments are done and performance comparisons are conducted. The results verify that the proposed strategy is an appropriate method for the implementation of relay selection and can achieve significant performance gains in terms of outage probability regardless of the symmetry or asymmetry of the channels. Compared with the AF scheme and the scheme using relay selection, the conventional JDF scheme and that using relay selection perform well at low signal-to-noise ratios (SNRs).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.3
• /
• pp.168-175
• /
• 2021

The optimal determination of seeding rate is critical to minimizing uncertainties about the large variations observed in forage quality and productivity when alfalfa is cultivated under different geographical areas and growing conditions. The objective of this investigation was to provide information about the proper seeding rate according to harvest timing for alfalfa cultivation in the Northern regions of Korea. Alfalfa was sown in September 2018 at a seeding rate of 20, 30 or 40 kg/ha and harvested four times in 2019: May 3, July 2, September 11, and October 13. Regardless of seeding rate, alfalfa plant height was longest at the third harvest (113 cm) and the shortest in the last annual harvest (43.8 cm). However, seeding rate had no effect on alfalfa plant height at any harvest. Forage relative feed value was increased in the first cutting but decreased in the third cuttings as seeding rate increased. However, seeding rate had slight effect on alfalfa forage quality components at the second and fourth cuttings. Total annual DM and crude protein production (in 4 harvests) was greater at higher seeding rates. Plots seeded at a rate of 40 kg/ha produced on average 1,257 and 2,620 kg/ha more forage (DM basis) than those seeded at a rate of 30 or 20 kg/ha, respectively. Forage DM production at the first, second, third, and fourth harvests accounted for 36.1, 24.0, 27.1, and 12.8 % of total annual DM production, respectively. Overall, small differences were seen when alfalfa seeding rate was different but maximum forage DM production (in four harvests) was detected when seeding rate was 40 kg/ha. These data could be useful to the alfalfa growers by allowing them to make more accurate trade-offs between seed price and the expected magnitude of forage yield gains in order to select the best seeding rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1149-1155
• /
• 2003

OFDM/SFH(orthogonal frequency division multiplexing/slow frequency hopping) system is the combination of OFDM communication system with frequency hopping(FH) method and OFDM/DS(orthogonal frequency division multiplexing/direct sequence) system combines the OFDM communication system with direct sequence(DS) method in terms of PN(pseudo noise) sequence. These two systems are also can be used for anti-jamming. In this study we analyze performances of OFDM/SFH system and OFDM/DS system with the equal information rate in partial band jamming and tone jamming channel. We find BER(bit error rate) in the variation of JFR(jamming fractional ratio) and JSR(jamming to signal power ratio) of the partial band jamming. Also, BER is found in the several JSR of the single tone or multi tone jamming. OFDM/DS system shows better performance than OFDM/SFH system in partial band jamming environment. OFDM/DS system has about 2.5 ㏈ SNR(signal to noise power ratio) gains than OFDM/SFH system when JFR=4/16 and JSR=0 ㏈ to meet BER=10$\^$-3/. However, OFDM/SFH system has about 3 ㏈ SNR gains than OFDM/DS system at single tone jamming of JSR=5 ㏈. In multi tone jamming, performance of OFDM/SFH system is considerably degraded than OFDM/DS system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.10
• /
• pp.1183-1188
• /
• 2015

The FM-QCSK(: Frequency Modulated Quadrature Chaos Shift Keying) system is one of the most efficient systems in chaotic literature. One of the problems in this system is that half the bit duration is used for sending a chaotic reference signal which leads to increase the energy losses and reduces the data rate. In this paper, a novel scheme to enhance the performance of FM-QCSK system has been proposed. With the proposed scheme, FM-QCSK would be able to operate at higher data rates with reduced BER(: Bit Error Rate) and energy consumption. The basic modification introduced by the proposed scheme is the use one reference chaotic signal to transmit multi information signals in both in-phase and quadrature-phase channels. The results showed that the proposed scheme have achieved more than 3 dB gains in SNR for AWGN channels respectively at $BER=10^{-3}$ over the conventional one. The results also showed that the optimum number information signals can be send per reference signal is 8.

• Korean Journal of Oriental Medicine
• /
• v.16 no.2
• /
• pp.143-157
• /
• 2010

Objectives : The objective of this study was to access the effect of Artemisiae capillaris herba Extracts on the organogenetic reproductive toxicity of New Zealand White rabbits when administered by oral gavage. Methods : Gestational New Zealand White rabbits were dosed from 6 days of gestation to 18 days of gestation. It was conducted in accordance with the recommendations of the KFDA Guideline for Detection of Toxicity to Reproduction for Medicinal Products. In addition, serum AST, ALT, LDH and ALP levels were detected with their necropsy and histopathological observation Results: No significant changes of body weights, gains and food consumption were demonstrated in all dosed groups compared to those of vehicle control group except for 2,000mg/kg-dosing group, which showed significantly increase of body weight compared to that of vehicle control group. Normal gross findings were demonstrated in all tested groups. No significant changes of number of corpora lutea, implantation, implantation rate, number of fetal death, loss rate of post-implantation, number of live youngs at C-section, survival rate of post-implantation, number of male live youngs at C-section, number of female live youngs, sex ratio of live young, external anomalies of live youngs and body weight of live youngs were demonstrated in all dosed groups compared to those of vehicle control group. Although some visceral variations such as thymic reminant in the neck, dilation of renal pelvis, dilated ureter and malpositioned left common carotid artery, no significant changes were demonstrated in all dosed groups compared to that of vehicle control group. Some malformations and variation were demonstrated with retardations. However, no significant changes were demonstrated in all dosed groups compared to that of vehicle control group. In addition, similar ossification numbers were detected in sternebrae, metacarpals, metatarsals, phalanges, cervical vertebrae, and sacral and caudal vertebrae. No Artemisiae capillaris herba Extracts treatment-related changes of serum AST, ALT, LDH and ALP levels were demonstrated in all dosed levels in this study. Conclusions : We could conclude that oral administration of Artemisiae capillaris herba Extracts hasn't an influence on the organogenetic reproductive toxicity.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.15 no.4
• /
• pp.9-16
• /
• 2007

Tilt rotor aircraft can take off and land vertically and cruise faster than any other helicopter. A scaled flight demonstration model of a tilt rotor aircraft has been developed by KARI. Because the flight characteristics of tilt rotor are not well known, the developed scaled model would be helpful to evaluate flight control algorithm of a full scale aircraft. The tethered hover test has been performed in order to improve hover flight characteristics of tilt rotor aircraft prior to flight test of the small scaled model. During the tethered hover test, the performance of rotor speed governor, rate SAS (Stability Augmentation System) and control surface mixers have been evaluated. We expect that the results of real flight hover test would be quite same as tethered hover test. Therefore the tethered hover test results will reduce the risk of flight test properly by fixing some of hidden problems which might occur during the flight test. This paper presents the results of tethered hover test in detail and shows how it could be final ground test before flight test. The control mixer gain and rate SAS feedback gains were modified in order to get higher controllability and stability during the tethered hover flight. The rotor governor showed that it could keep rotor RPM constant with very small deviation even during severe pilot collective input change. The tethered hover test results gave pilot and engineers confirmation and experience about the scheduled flight test.

• Journal of Digital Contents Society
• /
• v.18 no.1
• /
• pp.141-147
• /
• 2017

Scalable extension of High Efficiency Video Coding (SHVC) standard uses the up-sampled residual data from the base layer to make a residual data in the enhancement layer. This paper describes an efficient algorithm for improving coding gain by using the filtered residual signal of base layer in the Scalable extension of High Efficiency Video Coding (SHVC). The proposed adaptive filter selection mechanism uses the smoothing and sharpening filters to enhance the quality of inter-layer prediction. Based on two filters and the existing up-sampling filter, a rate-distortion (RD)-cost fuction-based competitive scheme is proposed to get better quality of video. Experimental results showed that average BD-rate gains of 1.5%, 2.1%, and 1.7% for Y, U and V components, respectively, were achieved, compared with SHVC reference software 5.0, which is based on HEVC reference model (HM) 13.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.762-768
• /
• 2005

This paper proposes new space-time block codes achieving full rate and full diversity for QAM and quasi-static Rayleigh fading channels when using any number of transmit antennas larger than 3 transmit antennas. These codes are constructed by serially concatenating the constellation rotating $precoders^{[4,5]}$ with the Alamouti scheme$3^{[3]}$ Bike the conventional A-ST-CR code$^{[6,7]}$. Computer simulations show that the proposed codes achieve approximately 1.3dB, 1.4dB and 1.5dB larger coding gains than the ST-CR $codes^{[4,5]}$ for QPSK with 3, 4 and 5 transmit antennas, respectively, and about 3dB for 16QAM with 3 transmit antennas.