• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.73-80
• /
• 1991

Air/fuel ratio control system for gasoline engines has been analyzed to determine the control gain of the system. In this analysis the engine is modelled to be a simple time delaying element and the ramp-and-jump method is used to control air/fuel ratio. The result shows that it is necessary to measure the air flow rate accurately to enhance the control performance. And also it is shown that the control gain must be determined in some bounded region to meet the fast dynamic response and high catalyst conversion efficiency together.

• Asia-Pacific Journal of Business
• /
• v.11 no.4
• /
• pp.65-81
• /
• 2020

Purpose - This research aims to investigate how consumers' eco-friendly product choice ratio changes as the benefits of eco-friendly products are framed as (1) non-monetary benefits, (2) monetary gain integrated with the loss or (3) monetary gain segregated from the loss. Design/methodology/approach - A mixed-design, scenario-based choice experiment was conducted. A series of chi-square tests and residual analyses were conducted to analyze the data. Findings - When the monetary gain was larger or slightly smaller than the loss, the participants' eco-friendly product choice ratio was higher when the monetary gain was integrated with the loss than those in the other two conditions. When the monetary gain was significantly smaller than the loss, the participants' eco-friendly product choice ratio was lower when the monetary gain was integrated with the loss than those in the other conditions. The ratio did not differ between the latter two conditions. Research implications or Originality - This research shows that marketers should frame the benefits of eco-friendly products and their costs in different manners depending on the relative magnitudes of them. This research also complements the existing literature by comparing the effectiveness of non-monetary framing of eco-friendly product benefits with that of monetary framing following hedonic editing hypothesis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.9
• /
• pp.1305-1309
• /
• 2005

Experiments were conducted to determine the efficacy of modified montmorillonite nanocomposite (MMN) to reduce the toxic effects of aflatoxin (AF) in growing/finishing pigs. 96 weaned pigs were assigned to four dietary treatment groups (0 g of MMN and 0 mg of AF/kg feed, 3 g of MMN/kg feed, 0.1 mg of AF/kg feed, and 3 g of MMN plus 0.1 mg of AF/kg feed). Body weight gain (BW gain), feed/gain ratio, serum biochemical values and enzyme activities were evaluated. Compared with the control, AF alone markedly reduced BW gain and resulted in a significantly higher feed/gain ratio. There were no differences in BW gain and feed/gain ratio between 0.3% MMN or 0.3% MMN plus AF and the control. These results suggested that the deleterious effects of AF were ameliorated by MMN addition. AF intake markedly increased relative organ weights of liver, kidney, spleen and pancreas, and resulted in significant alterations of serum parameters. However, these parameters for pigs fed diets containing MMN and AF returned to normal values, indicating that MMN had the ability to recover the AF-decreased performance, organ damage and to correct aberrations in serum parameters. These findings in our study suggested that MMN can effectively modulate the toxicity of AF in growing/finishing pigs and may offer a novel approach to the preventive management of aflatoxicosis in animals.

• Journal of Environmental Science International
• /
• v.31 no.12
• /
• pp.1135-1138
• /
• 2022

This study was conducted to evaluate the effects of sipjeondaebo-tang by-product powder on the growth performance of broilers. A total of 120 broiler chicks (Arbor acres) at 0 days old were assigned to one of two treatments with three replications: control and 1% sipjeondaebo-tang by-product powder. Weight gain at 3 weeks and feed intake at 5 weeks were significantly (p<0.05) influenced by the sipjeondaebo-tang by-product powder treatments. However, there were no significant differences in the feed conversion ratio between treatments as a function of treatment time (p>0.05). Overall, weight gain and the feed conversion ratio were slightly greater for the sipjeondaebo-tang by-product powder treatment than the control treatment. It was concluded that sipjeondaebo-tang by-product powder may be an appropriate source of feed additive, without any negative effects on the growth performance of the broilers.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.7
• /
• pp.19-26
• /
• 2018

This study tested 25 lightweight aggregate concrete (LWAC) mixtures using the expanded bottom ash and dredged soil granules to examine the compressive strength gain of such concrete with different ages. The test parameters investigated were water-to-cement ratios and the natural sand content for the replacement of lightweight fine aggregate. The compressive strength gain rate in the basic equation specified in fib model code was experimentally determined in each mixture and then empirically formulated as a function of the water-to-cement ratio and oven-dried density of concrete. When compared with 28-day compressive strength, the tested LWAC mixtures exhibited relatively low gain ratios (0.49~0.82) at an age of 3 days whereas the gain ratios (1.16~1.41) at 91 days were higher than that (1.05~1.15) of the conventional normal-weight concrete. Thus, the fib model equations tend to overestimate the early strength gain of LWAC but underestimate the long-term strength gain. The proposed equations are in good agreement with the measured compressive strength development of LWAC at different ages, indicating that the mean and standard deviation of the normalized root mean square errors determined in each mixture are 0.101 and 0.053, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1777-1781
• /
• 2003

The lysine requirements of juvenile yellowtail flounder (Pleuronectes ferrugineus) having 19.5 g initial body weight were estimated by feeding six practical-type diets containing graded levels of lysine (1.21 to 2.69% of dry diet). Dietary amino acid profile simulated that of whole body of yellowtail flounder. Most of amino acids in the diets were provided by corn gluten meal, herring meal and gelatin. Protein efficiency ratio (PER) improved significantly until lysine level increased up to 2.1% (4.3% of protein). Same trend was observed in feed:gain ratio (FGR) which maintained constant in fish groups fed diets containing lysine above 2.1%. The highest nitrogen gain (0.34 g/fish) in whole body was found in fish fed 2.1% lysine, though the value was not different from those of fish fed above the level of lysine. Fish fed 2.1% lysine also showed the best nitrogen retention efficiency of 24.6%. The broken-line analysis of protein efficiency ratio and body nitrogen gain against dietary lysine level yielded an estimated lysine requirement of 2.2% (4.5% of protein) and 2.3% (4.7% of protein), respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.816-822
• /
• 2001

The thermoforming process is widely used in the plastics industry to produce articles for the packaging, automotive, domestic construction and leisure industries. The microcellular foaming process appeared at M.I.T. in 1980s to save a quantity of polymer materials and increase their mechanical properties. The glass transition temperature of polymer materials is one of many important process variables in appling the microcellular foaming process to the conventional thermoforming process. The goal of this research is to evaluate the relation between gas absorption and glass transition temperature in batch process using microcellular foaming process. The weight gain ratio of polymer materials has a conception of gas absorption. Polymers such as acrylonitrile-butadiene-styrene(ABS), polystyrene(PS) have been used in this experiment. According to conventional Chows model and Cha-Yoon model, it was estimated with real experimental result to predict a change of glass transition temperature as a function of the weight gain ratio of polymer materials in batch process to gain microcellular foamed plastic products.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.8
• /
• pp.1172-1180
• /
• 2013

Two experiments were conducted to determine the standardized ileal digestible (SID) lysine (Lys) requirement and the ideal SID threonine (Thr) to Lys ratio for finishing barrows. In Exp. 1, 120 barrows with an average body weight of $72.8{\pm}3.6$ kg were allotted to one of six dietary treatments in a randomized complete block design conducted for 35 d. Each diet was fed to five pens of pigs containing four barrows. A normal crude protein (CP) diet providing 15.3% CP and 0.71% SID Lys and five low CP diets providing 12% CP with SID Lys concentrations of 0.51, 0.61, 0.71, 0.81 and 0.91% were formulated. Increasing the SID Lys content of the diet resulted in an increase in weight gain (linear effect p = 0.04 and quadratic effect p = 0.08) and an improvement in feed conversion ratio (FCR) (linear effect p = 0.02 and quadratic effect p = 0.02). For weight gain and FCR, the estimated SID Lys requirement of finishing barrows were 0.71 and 0.71% (linear broken-line analysis), 0.79 and 0.78% (quadratic analysis), respectively. Exp. 2 was a 26 d dose-response study using SID Thr to Lys ratios of 0.56, 0.61, 0.67, 0.72 and 0.77. A total of 138 barrows weighing $72.5{\pm}4.4$ kg were randomly allotted to receive one of the five diets. All diets were formulated to contain 0.61% SID Lys (10.5% CP), which is slightly lower than the pig's requirement. Weight gain was quadratically (p = 0.03) affected by SID Thr to Lys ratio while FCR was linearly improved (p = 0.02). The SID Thr to Lys ratios for maximal weight gain and minimal FCR and serum urea nitrogen (SUN) were 0.67, 0.71 and 0.64 using a linear broken-line model and 0.68, 0.78 and 0.70 using a quadratic model, respectively. Based on the estimates obtained from the broken-line and quadratic analysis, we concluded that the dietary SID Lys requirement for both maximum weight gain and minimum FCR was 0.75%, and an optimum SID Thr to Lys ratio was 0.68 to maximize weight gain, 0.75 to optimize FCR and 0.67 to minimize SUN for finishing barrows.

• Proceedings of the KIEE Conference
• /
• 1989.11a
• /
• pp.235-239
• /
• 1989

This paper investigated the effect of right half plane zero on the transient response in the buck-boost DC-DC converter. And it is clarified that the damping ratio decreases gradually by increases of the feedback loop gain and the regulation system of the converter becomes unstable. From the result, we obtained the stability region about the duty ratio and the output current by evaluating the feedback loop gain.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.303-308
• /
• 2008

Directly modulated fiber-optic links generally suffer higher link loss and larger signal distortion than externally modulated links. These result from the electron-photon conversion loss and laser modulation dynamics. As a method to overcome the drawbacks, we have experimentally demonstrated the RF performance of directly modulated, ultra-strong injection-locked gain-lever distributed Bragg reflector (DBR) lasers. The free-running DBR lasers exhibit an improved amplitude modulation efficiency of 12.4 dB under gain-lever modulation at the expense of linearity. By combining gain-lever modulation with ultra-strong optical injection locking, we can gain the benefits of both improved modulation efficiency from the gain-lever effect, plus improved linearity from injection locking. Using an injection ratio of R=11 dB, a 23.4-dB improvement in amplitude response and an 18-dB improvement in spurious-free dynamic range have been achieved.