• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2427-2433
• /
• 2015

A high-gain circularly-polarized patch antenna with a double-layered superstrate is proposed operating at a wireless LAN frequency. A superstrate has an array of metallic periodic unit cells and is located above the patch antenna with an air-gap. The designed antenna has a high gain of over 9.59dBi, which is the gain enhancement of 6.48dB compared to the patch antenna without superstrate. And it has a low axial ratio of under 3dB, so that it maintains the circular polarization of the patch antenna. The optimum air-gap height at the superstrate of $4{\times}4$ arrays is 25mm, which is equivalent to about $0.2{\lambda}$ at the frequency of 2.45GHz. We confirmed that the double-layered stacking of a superstrate increases the effective aperture size and hence it leads to enhance a gain of the patch antenna.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.4
• /
• pp.316-321
• /
• 2003

Analysis of breeding gains in grain yield has been intensively conducted in wheat, barley, oat, maize, and soybean. Such information is limited in rice. The objective of this study was to compare the breeding gains and cultural gains contributed to yield gains of Korean rice varieties since early 1900s. Two sets of yield data were used for analysis; the historical yield data of 1908 for old japonica cultivars, and present yield data in the years from 1996 to 1998 for the six cultivars, consisting of previous two old cultivars and four contemporary cultivars. The old cultivars were two native cultivars, Jodongi and Damageum, while contemporary cultivars were two premium quality japonica cultivars, Hwaseongbyeo and Dongjinbyeo, and two Tongil-type cultivars, high yielding cultivars developed from indica/japonica hybridization, Milyang23 and Dasanbyeo. The yield differences of old cultivars between the experiments in 1908 and the experiments from 1996 to 1998 were estimated as cultural gains (1.84 tons $\textrm{ha}^{-1}$) due to the improvement of cultivation technology. Yield differences between the old cultivars and contemporary cultivars were considered total yield gains during the periods. These were 2.51 tons $\textrm{ha}^{-1}$ for japonica cultivars and 3.81 tons $\textrm{ha}^{-1}$ for Tongil-type cultivars. From these data, the genetic gain of 0.67 tons $\textrm{ha}^{-1}$ and 1.97 tons $\textrm{ha}^{-1}$ were estimated for japonica cultivars and Tongil-type cultivars respectively. The ratio between cultural gain and genetic gain appeared to be 2.7:1 for japonica cultivars and 1:1 for Tongil-type cultivars. This analysis clearly showed the higher genetic contribution in Tongil-type cultivars than in japonica cultivars, suggesting a guideline to be used when planning new yield improvement programs. Additional implication has emerged when a better yield response to modem cultivation technology was found in one of the old cultivars, suggesting the combined improvement between breeding and cultural improvement is necessary for attaining the maximum yield capacity of a crop.

• Journal of electromagnetic engineering and science
• /
• v.13 no.3
• /
• pp.178-185
• /
• 2013

This paper introduces a high-efficiency, high-gain, broadband quasi-Yagi antenna, and its four-element array for use in 60-GHz wireless communications. The antenna was fed by a microstrip-to-slotline transition consisting of a curved microstripline and a circular slot to allow broadband characteristics. A corrugated ground plane was employed as a reflector to improve the gains in the low-frequency region of the operation bandwidth, and consequently, to reduce variation. The single antenna yielded an impedance bandwidth of 49 to 69 GHz for $|S_{11}|$ <-10dB and a gain of >12.0 dBi while the array exhibited a bandwidth of 52 to 68 GHz and a gain greater than 15.0 dBi. Both proposed designs had small gain variations (${\pm}0.5$ dBi) and high radiation efficiency (>95%) in the 60-GHz bands. The features of the proposed antenna were validated by designing, fabricating, and testing a scaled-up configuration of the single antenna at the 15-GHz band. The measurements resulted in an impedance bandwidth of 13.0 to 17.5 GHz for $|S_{11}|$ <-10dB, a gain of 10.1 to 13.2 dBi, and radiation efficiency in excess of 88% within this bandwidth. Additionally, the 15-GHz antenna yielded quite symmetric radiation profiles in both E- and H-planes, with a high front-to-back ratio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1855-1861
• /
• 2017

In this paper, the gain enhancement of an SDPA using a director and two parasitic patches is studied. The modified balun is used to increase the bandwidth, whereas the director and two parasitic patches are appended to the SDPA to enhance the gain in the middle and high frequency bands. The effects of the distance between the director and parasitic patches on the antenna performance are analyzed, and the SDPA with a gain over 7 dBi at 1.54-2.99 GHz band is designed. The proposed SDPA is fabricated on an FR4 substrate with a dimension of $90mm(L){\times}135mm(W)$ in order to validate its performance. The fabricated antenna shows a frequency band of 1.56-3.10 GHz for a VSWR < 2, and it is confirmed by measurement that gain maintains over 7 dBi in the frequency range of 1.54-3.00 GHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.2
• /
• pp.252-258
• /
• 2017

In this paper, the bandwidth and gain enhancement of a double-dipole quasi-Yagi antenna (DDQYA) using a modified balun and two directors is studied. The proposed DDQYA consists of two strip dipoles with different lengths, a ground reflector, which are connected through a coplanar strip line, and two directors. The modified balun is used to increase the bandwidth, whereas two directors are appended to the DDQYA to enhance the gain in the middle and high frequency band. The effects of the length and width of the first director on the antenna performance are analyzed, and final design parameters to obtain a gain over 7 dBi at 1.60-2.90 GHz band are obtained. A prototype of the proposed DDQYA is fabricated on an FR4 substrate, and the experimental results show that the antenna has a frequency band of 1.57-3.00 GHz for a VSWR < 2, and measured gain ranges 7.1-7.8 dBi at 1.60-2.90 GHz band.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.12
• /
• pp.1725-1733
• /
• 2016

Recent findings have shown that microbial nitrogen flow and digestible energy of diets are increased when urea is combined with a slow-release urea (SRU) in diets with a starch to acid detergent fibre ratio (S:F) 4:1. This affect is attributable to enhanced synchrony between ruminal N availability for microbial growth and carbohydrate degradation. To verify the magnitude of this effects on lamb performance, an experiment was conducted to evaluate the effects of combining urea and a SRU in diets containing S:F ratios of 3:1, 4:1, or 5:1 on performance, dietary energetics and carcass characteristics of finishing lambs. For that, 40 Pelibuey${\times}$Katahdin lambs ($36.65{\pm}3kg$) were assigned to one of five weight groupings in 20 pens (5 repetition/treatments). The S:F ratio in the diet was manipulated by partially replacing the corn grain and dried distiller's grain with solubles by forage (wheat straw) and soybean meal to reach S:F ratios of 3:1, 4:1 or 5:1. An additional treatment of 4:1 S:F ratio with 0.8% urea as the sole source of non-protein nitrogen was used as a reference for comparing the effect of urea combination vs. conventional urea at the same S:F ratio. There were no treatment effects on dry matter intake (DMI). Compared the urea combination vs urea at the same S:F ratio, urea combination increased (p<0.01) average daily gain (ADG, 18.3%), gain for feed (G:F, 9.5%), and apparent energy retention per unit DMI (8.2%). Irrespective of the S:F ratio, the urea combination improved the observed-to-expected dietary ratio and apparent retention per unit DMI was maximal (quadratic effect, $p{\leq}0.03$) at an S:F ratio of 4:1, while the conventional urea treatment did not modify the observed-to-expected net energy ratio nor the apparent retention per unit DMI at 4:1 S:F ratio. Urea combination group tended (3.8%, p = 0.08) to have heavier carcasses with no effects on the rest of carcass characteristics. As S:F ratio increased, ADG, G:F, dietary net energy, carcass weight, dressing percentage and longissimus thoracis (LM) area increased linearly ($p{\leq}0.02$). Combining urea and a slow-release urea product results in positive effects on growth performance and dietary energetics, but the best responses are apparently observed when there is a certain proportion (S:F ratio = 4:1) of starch to acid detergent fibre in the diet.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.8
• /
• pp.1236-1242
• /
• 2007

Sixty healthy growing pigs ($Duroc{\times}Landrace{\times}Yorkshire$ with an average BW of 21.4 kg) were used to determine the true digestible phosphorus (TDP) requirement of growing pigs on the basis of growth performance and serum biochemical indices. Pigs were assigned randomly to one of five dietary treatments (12 pigs/diet), representing five levels of TDP (0.16%, 0.20%, 0.23%, 0.26% and 0.39%). There were three replications per treatment, with four pigs (2 barrows and 2 gilts) in each replication (2 pigs/pen) A randomized-block design was used, with pen as the experimental unit. Experimental diets were formulated to provide the 5 TDP levels with a total calcium (Ca) to TDP ratio of 2:1, and offered to pigs at 5% BW for 28 d. The total Ca contents of the five diets were 0.33, 0.38, 0.45, 0.51 and 0.79%, respectively. During the 28-d experimental period, the ADG of pigs was affected by dietary TDP levels as described by Equation 1: y = $-809,532x^4+788,079x^3-276,250x^2+42,114x-1$,759; ($R^2$ = 0.99; p<0.01; y = ADG, g/d; x = dietary TDP, %). The feed:gain ratio for pigs was affected by dietary TDP levels as described by Equation 2: y = $3,651.1x^4-3,480.4x^3+1,183.8x^2-172.5x+10.9$ ($R^2$ = 0.99; p<0.01; y = feed:gain ratio; x = dietary TDP, %). Total P concentrations in serum were affected by dietary TDP levels as described by Equation 3: y = $-3,311.7x^4+3,342.7x^3-1,224.6x^2+195.6x-8.7$ ($R^2$ = 0.99; p<0.01; y = total serum P concentration and x = dietary TDP, %). The highest ADG (782 g/d), the lowest feed:gain ratio (1.07), and the highest total serum P concentration (3.1 mmol/L) were obtained when dietary TDP level was 0.34%. Collectively, these results indicate that the optimal TDP requirement of growing pigs is 0.34% of the diet (e.g., 5.1 g/day for a 30-kg pig that consumed 1.5 kg feed daily) at a total Ca to TDP ratio of 2:1.

• Korean Journal of Poultry Science
• /
• v.39 no.4
• /
• pp.305-310
• /
• 2012

This work was carried out to investigate performance and carcass yield of large-type broilers at different stocking densities. Treatments were T1 (9.1 birds/$m^2$), T2 (10.3 birds/$m^2$) and T3 (11.5 birds/$m^2$) by the stocking density. Four hundred eight 1-day-old Arbor Acre broiler chicks were used for six weeks (starter, 0~1 wks; earlier, 1~3 wks; finisher, 3~6 wks) and divided into 3 treatments (4 replications/treatment, 30, 34 or 38 birds/replication). Research indexes were rearing viability ratio, body weight, body weight gain, feed intake, feed conversion ratio, production efficiency factor and carcass ratio. Rearing viability ratio (%) was 89% or more for all treatments and there was no significant difference on weekly rearing viability ratio (%). Body weight of T2 was the greatest and that of T3 was the lowest at 1 weeks old (P<0.05). Body weight gain of T2 was the greatest and that of T3 was the lowest at 0~1 weeks old (P<0.05). However, body weight gain of T3 was the greatest and that of T1 was the lowest at 1~2 weeks old (P<0.05). Body weight gain of T2 was the greatest as 3,031 g among treatments at 0~6 weeks old (P<0.05). Feed intakes of T1, T2 and T3 were 1,417 g, 1,265 g and 1,355 g, respectively, and that of T1 was the greatest among treatments (P<0.05). There was no significant difference on body weight, body weight gain and feed intake. Feed conversion ratio of T1 was the greatest among treatments at 1~2 wks, 3~4 wks and 0~6 wks old (P<0.05). Production efficiency factors of T1, T2 and T3 were 363.5, 388.3 and 358.3, respectively, and there was no significant difference among treatments. Wing meat ratio of T1 was the higher compared to other treatments at the age of 4 wk (P<0.05). There was no significant difference on carcass ratio and partial meat ratio among treatments. Neck meat ratio of T2 was the lowest among treatments (P<0.05). This result may provide the standard data of different stocking densities for large-type broiler and the further research is needed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.5
• /
• pp.23-30
• /
• 2000

To compensate the nonlinearity of electroabsorption modulator(EAM) resulting from its near exponential transfer function, a semiconductor optical amplifier(SOA) that has a log transfer function is used. Since the transfer function of SOA is inverse to that of EAM, the intermodulation distortion(IMD) of EAM can be reduced by cascading SOA to EAM. Also, the RF gain can be increased by the optical gain of SOA. For these reasons, spurious free dynamic range(SFDR) of EAM is enhanced by connecting SOA to EAM in series and operating in gain salutation region. To improve the nonlinearity compensation of EAM, the increased gain of SOA is required and the slope of gain saturation, the ratio of gain to input SOA power, needs to be steep. However, signal spontaneous beat noise that is the dominant system noise increases in proportion to the gain such that the SFDR of EAM is reduced. The higher the gain of SOA is, the more ASE is increased. Thus the noise level of system is increased and the following SFDR of EAM is decreased. The slope of gain saturation region and ASE of have trade-off relation and the optimization is achieved at 8㏈ optical gain. 9㏈ enhancement of SFDR of EAM is obtained. This scheme is easy to embody the linear EAM and the integration with three components (DFB-LD, EAM and SOA) offers many merits, such as low insertion loss, low chirping and low polarization sensitivity.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.37-42
• /
• 2010