• Clinical and Experimental Pediatrics
• /
• v.58 no.2
• /
• pp.52-59
• /
• 2015

Purpose: This study aimed to investigate the relative weight gain at 2-week intervals up to 6 weeks after birth to predict retinopathy of prematurity (ROP) requiring treatment among very low birth weight infants. Methods: A total of 211 preterm infants with birth weights <1,500 g and gestational age <32 weeks were retrospectively reviewed. The main outcome was the development of ROP requiring treatment. Body weight measurements were recorded daily. Relative weight gains (g/kg/day) were calculated at the second, fourth, and sixth week after birth. Results: Of the 211 infants, 89 developed ROP, of which 41 spontaneously regressed and 48 with early treatment of ROP type I required laser treatment. The relative weight gain at 2, 4, and 6 weeks postnatal age was significantly lower in infants with ROP requiring treatment than in infants without ROP or those with spontaneous regression (P<0.001, P=0.005, and P=0.004, respectively). On logistic regression, poor relative weight gain in the first 2 weeks was found to be related to ROP requiring treatment (adjusted odds ratio, 0.809; 95% confidence interval, 0.695-0.941; P=0.006). Relative weight gain at 2 weeks postnatal age was significantly lower in infants with ROP requiring treatment compared to that in ROP requiring no treatment (P=0.012). Conclusion: Poor postnatal weight gain in the first 2 weeks of life is an important and independent risk factor for ROP requiring treatment. Postnatal weight gain can predict the development of severe ROP requiring treatment.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.02a
• /
• pp.375-376
• /
• 2006

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.650-657
• /
• 2002

Two experiments were conducted to evaluate the effects of forage:concentrate ratios and feeding principles on milk yield, milk composition, body weight change, postpartum oestrus and feed cost. A total of 36 crossbred F1 cows (Holstein Friesian${\times}$Local Yellow) in the 8th week of lactation were used. In each experiment, animals were divided into three groups using a randomized block design according to the milk yield of the previous eight weeks. Cows were fed 30, 50 and 70% concentrate in the diet based on DM. In experiment 1 (Fc), cows were given the same amount of DM with constant ratios of forage and concentrate within treatments. In experiment 2 (Fa), cows were given the same constant amounts of concentrate as in experiment 1 and ad libitum forage. The forage consisted of a natural grass mixture based on 5 species of grasses with high nutritive values. There was no difference in total DM intake between treatments within experiments. However, cows fed forage ad libitum had higher DM intakes compared to cows fed constant forage (1.6, 4.5 and 9.5% for cows fed 70, 50 and 30% forage, respectively). Daily milk yield of cows fed forage ad libitum was higher than that of cows fed constant forage:concentrate ratio. Within experiment, milk yield was highest for cows fed 30% DM forage, followed by cows fed 50% and then cows fed 70% forage (11.17, 10.98 and 10.71 for the 30Fc, 50Fc and 70Fc cows; 11.73, 11.16 and 10.81 kg for the 30Fa, 50Fa and 70Fa cows, respectively). Decreased forage ratio in the diets resulted in decreased milk fat content and tended to increase milk protein. Increased concentrate ratio in the diet and feeding forage ad libitum increased body weight gain. The effect of forage:concentrate ratio on postpartum oestrus was not significant. The feed cost per kg milk produced was lowest for the cows fed 70% forage. It is concluded that increased ratio of concentrate resulted in increased body weight gain, milk yield, milk protein, and decreased milk fat. Feeding forage ad libitum increased feed intake, milk yield and body weight gain. The ratio of 50% forage is more suitable for milk production and animal condition, but in terms of feed cost and under the conditions of small dairy farmers, the 70% ad libitum forage feeding is recommended.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.4
• /
• pp.383-392
• /
• 2012

This paper reports the active vibration control of plates using a positive position feedback(PPF) controller with moment pair actuators. The equations of motion of the plates under a force and moment pairs are derived and the equations of PPF controllers are formulated. The numerical active control system is then achieved. The effect of the parameters - gain and damping ratio - of the PPF controllers on the open loop transfer function was investigated mainly in terms of the system stability. Increasing the gain of the PPF controller tuned at a mode, the magnitude of the open loop transfer function is increased at all frequencies without changing the phase behavior. The increase of the damping ratio of the PPF controller leads to decrease the magnitude of the open loop transfer function and to modify its phase characteristics, ie, system stability. Based on the behavior of the gain and the damping ratio of the controller, PPF controller for reduction of the plate vibration can be achieved. Two PPF controllers are designed with their connection in parallel to control the two modes simultaneously. Each PPF controller is tuned at the $1^{st}$ and $2^{nd}$ modes, respectively. Their parameters were determined to remain the system to be stable based on the results of the parametric study. A significant reduction in vibration at the tuned modes can be obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.2
• /
• pp.334-343
• /
• 1997

Reference white in color television receiver can be achieved by adjusting the RGB gun current ratio and it is necessary to provide additional gain ratio adjustment for the RGB video signal. Generally, the gun current density profile has a gaussian distribution and the gain-bandwidth product of RGB channel amplifieris constant. Therefore brightness and spatial resolution are changed with variations in reference white of receiver. In this paper, the effect of RGB gun current and channel gain ratios on brightness and resolution of CPT is analyzed. Brightness is increased with the color temperature of referenc white because of Helmholtz-kohlrausch effect. The change in ligh output is more abrupt and spatial resolution is improved with unity current ratio. For more bright and improved ressolution we also present the range of color temperature of reference white for P22 phosphors.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.202-209
• /
• 2014

In this paper, we analyzed the effects by multi-stacking superstrates over the circular-polarized patch antenna. The previous works considered a single-layered superstrate or a superstrate with multiple layers, and did not almost consider the axial ratio at the performance analysis. First, the effect of center frequency shift is analyzed by the variation of air-gap height between patch antenna and superstrate. The center frequency is down-shifted at the smaller air-gap height and has almost the same frequency as patch antenna at the air-gap height of $005{\lambda}_0$. Second, the antenna performance is analyzed by multi-stacking superstrates with the air-gap height of $005{\lambda}_0$. As the number of multi-stacked superstrates increase, antenna gain has a linear increase and axial ratio is exponentially deteriorated. In addition, it has also been observed that the antenna performance has the same trend with the number of multi-stacked superstrates as the thickness of superstrate increases. Finally, we confirmed that it is possible to design the CP patch antenna with the scalable gain and less than 3dB axial ratio by stacking the superstrate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.24-38
• /
• 2006

In this paper, we investigate the design and fabrication of a conical spiral antenna suitable for satellite TT&C applications. The shape of the spiral is optimized using a commercial electromagnetic software for good gain and axial ratio performances over $2.0{\sim}2.3\;GHz$ frequencies. A coaxial infinite balun feeding the spiral is designed using experimental methods. A method for precision fabrication of the spiral is presented. Measurements of the fabricated antenna show satisfactory performances over $2.0{\sim}2.3\;GHz$ such as a reflection coefficient less than -18 dB, a maximum gain greater than 4 dB, a gain greater than 0 dB over angles ${\pm}75^{\circ}$ from the antenna boresight, an axial ratio less than 5 dB over angles ${\pm}90^{\circ}$ from the antenna boresight, a front-back ratio greater than 15 dB.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.1
• /
• pp.39-47
• /
• 2014

Solar applications analysis and building energy performance depend on the quality of the solar resource data available. Unfortunately, most of the weather stations do not measure solar radiation data in Korea, as a reason many researchers have studied different solar radiation estimation models and suggested to apply them to various locations in Korea. In addition, they also studied the impact of hourly global solar radiation on energy performance of an office building by comparing the simulated building energy consumptions using four different weather files, one using measured, and three estimated solar radiation from different models, which are Cloud-cover Radiation Model (CRM), Zhang and Huang Model (ZHM), and Meteorological Radiation Model (MRM), and concluded that there was some impact on energy performance of the building due to the using different solar radiation models. However, the result cannot be applied to all other buildings since the simulated office building for that study only used limited building characteristics such as using fixed values of solar heat gain coefficient (SHGC) and window-to-wall ratio (WWR), which are significant parameters related to solar radiation that affect to the building energy consumptions. Therefore, there is a need to identify how the building energy consumption will be changed by varying these building parameters. In this study, the impact of one measured and three estimated global solar radiation on energy performance of the office building was conducted taking account of SHGC and WWR. As a result, it was identified that the impact of four different solar radiation data on energy performance of the office building was evident regardless SHGC and WWR changes, and concluded that the most suitable solar models was changed from the CRM/ZHM to the MRM as SHGC and WWR increases.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.647-651
• /
• 1992

Two experiments involving comparative slaughter procedures were conducted to see if the decrease in total energy retention (ER) resulted from the decreased food intake in growing chicks fed on a diet containing tryptophan less than the requirement. Ad libitum-feeding a diet containing 50% of tryptophan of a control diet (1.5 g/kg) decreased body weight gain, apparent metabolizable energy intake (AMEI), ER and ER : AMEI ratio. When both the control diet and the 0.75 g/kg tryptophan diet were tube-fed at the two levels of food intake, body weight gain was significantly lower in chicks on the low tryptophan diet than in the control chicks at each level of intake. AME : gross-energy ratio decreased only when the low tryptophan diet was tube-fed at the higher level of intake. Energy retained as protein was significantly decreased by the low tryptophan level and reduction of food intake. Energy retained as fat was affected by food intake. ER and ER : AMEI ratio were unaffected by dietary tryptophan level and were proportional to AMEI. Heat increment of feeding was affected by neither tryptophan nor food intake. These results indicate that the decreased ER in chicks fed on the low tryptophan diet was due mainly to the decreased food intake and not to the decreased efficiency of ME utilization.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.47-52
• /
• 2012

This paper is in regard to design and experiment about the radar's circular polarization antenna operating in the Ku band. By using the Post to manufacture the circular polarization antenna using the linear antenna, it could reduce the structural size of an antenna. 3 Posts were used in order to broaden the Axial ration Bandwidth of the circular polarization antenna. The distance and length between Posts and Post were appropriately selected for the axial ratio optimization and applied in the design. It was verified that the designed antenna has the impedence bandwidth of 12.7%, axial ratio performance less than 2dB and gain of 7.8dBi.