• Journal of the Korean Society for Railway
• /
• v.5 no.1
• /
• pp.18-25
• /
• 2002

This paper is to study a comparison of ride stabilities for the guideway vehicle between its three primary steering types; the front-rear wheel steering type, tile independent wheel steering and the front wheel steering. A numerical model were built to investigate various factors to have an influence on the vehicular stability. It was shown that dynamic stabilities of the three types were dependent on the steering gain ratio of front wheel steering to rear. The front-rear wheel steering type was more stable for the value of positive steering gains and the shorter distance between front axle and guide link showed better stabilities. On the contrary, the independent wheel steering was more stable for the value of negative gains and the longer distance between front axle and guide link showed better stabilities. Ride characteristics of he front wheel steering seemed to be found midway. Ride behaviors due to time delay from front steering to rear were very different from steering type to type.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1E
• /
• pp.1-10
• /
• 2008

A noise suppression algorithm is proposed for nonstationary noisy environments. The proposed algorithm is different from the conventional approaches such as the spectral subtraction algorithm and the minimum statistics noise estimation algorithm in that it classifies speech and noise signals in time-frequency bins. It calculates the ratio of the variance of the noisy power spectrum in time-frequency bins to its normalized time-frequency average. If the ratio is greater than an adaptive threshold, speech is considered to be present. Our adaptive algorithm tracks the threshold and controls the trade-off between residual noise and distortion. The estimated clean speech power spectrum is obtained by a modified gain function and the updated noisy power spectrum of the time-frequency bin. This new algorithm has the advantages of simplicity and light computational load for estimating the noise. This algorithm reduces the residual noise significantly, and is superior to the conventional methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.146-154
• /
• 2002

This paper presents a linearization technique up to the saturation region of power amplifiers. The predistorter gain polynomials which have optimum coefficients are introduced. Power amplifiers are most efficient when operated near the saturation region. Compensating the amplifier nonlinearities with these predistorter gain polynomials, the efficiency of the amplifier can be maximized. Simulation results demonstrate that the adjacent channel power ratio (ACPR) is improves by about 63 ㏈ at the band edge. The convergence and reconvergence characteristics of the linearizer are also satisfactory.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.497-500
• /
• 2000

In this paper, we compare the bit-error-rate performance of the fast-frequency-hopped spread-spectrum multiple-access (FFH/SSMA) and direct-sequence code-division multiple access (DS/CDMA) systems in a Rician fading channel. Each system has a same data rate, bandwidth and transmits over a Rician fading channel. The results illustrate tradoffs in performance between the FFH/SSMA and DS/CDMA systems as a function of the parameters such as average signal to noise ratio and processing gain. The performance of the FFH/SSMA system is shown to be less sensitive to the change of fading environments, while the change of processing gain and average signal to noise ratio gives considerable affect to the FFH/SSMA system compared with the DS/CDMA system. Without respect to the change of system parameters, for most of Rician fading channels (except non-fading channel), FFH/SSMA system gives better performance than DS/CDMA system in BBR < 10$\^$-3/.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.2
• /
• pp.105-112
• /
• 2018

This paper manufactured an active GPS antenna for ground vehicles and presented a method to verify the performances of the antenna and component technology of the low noise amplifier (LNA) board manufacturing. The manufactured GPS antenna is an active antenna where microstrip patch and LNA board were combined. The main performances were standing wave ratio, antenna gain, and axial ratio, and all satisfied the target specifications. The proposed component technology can be utilized as a basis data in which the performance of LNA board can be compensated in the mass production process inspection, and employed as a method to verify whether antennas are properly working in environmental tests.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.9-14
• /
• 1993

We chose Bessel beamu[$J_o(ar)}$)l in order to investigate image forming property of the optical system with combined filter of amplitude and phase(CFAP). This paper investigated numerically the influence of number of nodes of these beams on the PSF, encircled energy(E), transmission ratio(TR), gain((;) for an aberrated(1aberration-free) optical system. These results showed that the property of PSF differ considerably from the one of the existing amplitude filter and that Bessel beam has super compensating effect for an optical system with spherical aberration. Particularly, the Bessel beam has less the size of central spot than the radius of Airy disk, this result can therefore be applied to the fabrication of semiconductor device.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.407-408
• /
• 2015

The existing (q)Z-source PWM AC-AC converters have limited voltage gain because of the equivalent series resistance in the Z-source inductor. In order to obtain higher voltage gain than (q)Z-source AC-AC converters, a coupled inductor (or transformer) based Z-source AC-AC converter is proposed in this paper. By increasing turns ratio of the coupled inductor more than 1, the proposed converter can obtain higher output voltage than (q)Z-source converters with the same duty ratio. A 120 W prototype AC-AC converter is built and tested to verify performances of the proposed converter.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2003.05a
• /
• pp.435-442
• /
• 2003

정보 추출(Information Retrieval) 시스템은 거대한 양의 정보들 가운데 필요한 정보의 적절한 탐색을 도와주기 위한 도구이다. 이는 사용자가 요구하는 정보를 보다 정확하고 보다 효과적이면서 보다 효율적으로 전달해주어야만 한다. 그러기 위해서는 문서내의 무수히 많은 속성들 가운데 해당 문서의 특성을 잘 반영하는 속성만을 선별해서 적절히 활용하는 것이 절실히 요구된다. 이에 본 연구는 기존의 한글 문서 분류시스템(CB_TFIDF)[1]의 정확도와 신속성 두 가지 측면의 성능향상에 초점을 두고 있다. 기존의 영문 텍스트 문서 분류시스템에 적용되었던 다양한 속성선택 기법들 가운데 잘 알려진 세가지 즉, Information Gain, Odds Ratio, Document Frequency Thresholding을 통해 선별적인 사례베이스를 구성한 다음에 한글 텍스트 문서 분류시스템에 적용시켜서 성능을 비교 평가한 후, 한글 문서 분류시스템에 가장 적절한 속성선택 기법과 속성 선택에 대한 가이드라인을 제시하고자 한다.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.391-398
• /
• 2023

In this paper, we propose an alternative analysis to regulate DC motors using a PID controller with a gain scaling factor. We start by providing a systematic design method for selecting the PID gains of our proposed controller by seeing the effect of ϵ on damping ratio, overshoot and settling time from the frequency response analysis. With the help of matlab (simulink), We proceed to show that the proposed controller provides robust stability against system parameter uncertainty and the effect of the gain scaling factor on steady-state error. The validity of our control method along with the analysis is verified with the simulation results.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.83-85
• /
• 2019

The use of high voltage gain converters is essential for the distributed power generation systems with renewable energy sources such as the fuel cells and solar cells due to their low voltage characteristics. In this paper, a high voltage gain topology combining cascode Inverting Buck-Boost converter and voltage multiplier structure is introduced. In proposed converter, the input voltage is connected in series at the output, the portion of input power is directly delivered to the load which results in continuous input current. In addition, the voltage multiplier stage stacked in proper manner is not only enhance high step-up voltage gain ratio but also significantly reduce the voltage stress across all semiconductor devices and capacitors. As a result, the high current-low voltage switches can be employed for higher efficiency and lower cost. In order to show the feasibility of the proposed topology, the operation principle is presented and the steady-state characteristic is analyzed in detail. A 380W-40/380V prototype converter was built to validate the effectiveness of proposed converter.