• International Journal of Industrial Entomology and Biomaterials
• /
• v.3 no.2
• /
• pp.149-152
• /
• 2001

Effect of topical application with 10, 20 and 30 ${\mu}g$/ml testosterone propionate and estradiol -17${\beta}$ on the fourth and fifth instar bivoltine NB18 silkworm larvae Bombyx mori, on the glycogen and protein contents of the Fat body and trehalose and protein contents of the haemolymph has been studied. Glycogen content of the fat body was significantly decreased in both testosterone propionate and estradiol -17${\beta}$ treatment groups except in the group treated with 30 ${\mu}g$ testosterone propionate where the increase was not significant when compared with those of carrier controls. The increase/decrease in haemolymph trehalose content did not show any significant difference in all the treated groups. Protein content of the fat body significantly increased in 10 and 20 mg testosterone propionate and estradiol -l7${\beta}$ treated groups but in 30 mg treated groups the increase was not significant when compared with those of carrier controls. There was no significant change in the haemolymph protein content in all the testosterone propionate and estradiol -17${\beta}$ treated groups except in group treated with 10 ${\mu}g$ estradiol -17${\beta}$ where it showed a significant decrease when compared with that of carrier control.

• ANNALS OF ANIMAL RESOURCE SCIENCES
• /
• v.30 no.3
• /
• pp.111-120
• /
• 2019

The objective of this study was to investigate the effect of different feed inoculation method on rumen fermentation in an in vitro. Three experimental treatments were used: control (CON, direct dispersion of feed (2 g) in rumen fluid), combinations of direct dispersion (1 g) and nylon bag (DNB, pore size: 50 ㎛, 1 g), and nylon bag (NB, 2 g). An in vitro fermentation experiment was carried out using strained rumen fluid for 48 h incubation time and timothy was used as a substrate. At the end of the incubation, in vitro dry matter digestibility (IVDMD), in vitro neutral detergent fiber digestibility (IVNDFD), pH, volatile fatty acids (VFA), ammonia nitrogen (NH₃-N), and microbial community were evaluated and gas production was estimated at 3, 6, 12, 24, 48 h incubation periods. Gas production was higher in CON than DNB and NB at 6 and 12 h incubation time (p<0.01). There were no differences in final gas production, pH, NH₃-N concentration, total VFA production, and VFA profiles among treatments. The IVDMD was lowest in CON (p<0.01) but the IVNDFD was not differed by feed distribution methods. There were no significant differences in general bacteria and fungi. Protozoa count was highest in NB treatment among treatments (p<0.01). The abundance of cellulolytic bacteria, Ruminococcus flavefaciens and Fibrobacter succinogenes, was highest in the CON among treatments (p<0.01).

• Progress in Medical Physics
• /
• v.27 no.3
• /
• pp.125-130
• /
• 2016

Dual energy computed tomography (DECT) is used to classify two materials and quantify the mass density of each material in the human body. An energy modulation filter based DECT could acquire two images, which are generated by the low- and high-energy photon spectra, in one scan, with one tube and detector. In the case of DECT using the energy modulation filter, the filter should perform the optimization process for the type of materials and thicknesses for generating two photon spectra. In this study, Geant4 Monte-Carlo simulation toolkit was used to execute the optimization process for determining the property of the energy modulation filter. In the process, various materials used for the energy modulation filter are copper (Cu, $8.96g/cm^3$), niobium (Nb, $8.57g/cm^3$), stannum (Sn, $7.31g/cm^3$), gold (Au, $19.32g/cm^3$), and lead (Pb, $11.34g/cm^3$). The thickness of the modulation filter varied from 0.1 mm to 1.0 mm. To evaluate the overlap region of the low- and high-energy spectrum, Geant4 Monte-Carlo simulation is used. The variation of the photon flux and the mean energy of photon spectrum that passes through the energy modulation filter are evaluated. In the primary photon spectrum of 80 kVp, the optimal modulation filter is a 0.1 mm lead filter that can acquire the same mean energy of 140 kVp photon spectrum. The lead filter of 0.1 mm based dual energy CBCT is required to increase the tube current 4.37 times than the original tube current owing to the 77.1% attenuation in the filter.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1244-1245
• /
• 2008

Recently, piezoelectric transformer is applied to wide fields. Multi layer piezoelectric transformer has the advantage of high step up ratio, electromechanical coupling coefficient(Kp) and mechanical quality factor(Qm), but is indicated of peeling-phenomenon of electrode, rising sintering temperature made price of costly electrode. So in this study, it discuss on method for fabrication of rosen type piezoelectric transformers. For the fabrication as rosen type piezoelectric transformers, synthesized the powder using 0.01Pb$(ni_{1/3}Nb_{2/3})O_3$ - 0.08Pb$(Mn_{1/3}Nb_{2/3})O_3$ - 0.91Pb$(Zr_{0506}Ti_{0496})O_3$ (abbreviated as PNN-PMN-PZT) ceramics. The density, microstructure, dielectric and piezoelectric properties as a function of sintering temperature were investigated. The results indicated that the optimized properties of ceramics were obtained at sintering temperature of 1200$^{\circ}C$, showed the value of $d_{33}$=273pC/N, $K_p$=0.60 $Q_m$=1585, ${\varepsilon}_r$=1454, density=7.917$g/cm^3$ and $tan{\delta}$=0.0064.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.210-211
• /
• 2005

[ $(K_{0.5}Na_{0.5})NbO_3$ ](KNN) 세라믹스의 소결 특성과 압전 특성을 높이기 위해 B-site에 Sb를 치환하여 Sb함량에 따른 특성을 측정 하였다. Sb 의 함량을 0mol $\sim$ 0.1mol 까지 첨가한 결과 소결 밀도는 Sb의 첨가량이 많아질수록 증가하다 Sb-0.08mol에서 4.40g/$cm^3$으로 가장 높은 밀도를 가졌으며, 여기서의 전기기계 결합 계수가(Kp) 0.45로 높은 값을 나타내었다. 상전 이 온도는 375$^{\circ}C$로 순수한 KNN 의 420$^{\circ}C$ 보다 약 45$^{\circ}C$정도 떨어졌으나 orthorhombic에 서 tetragonal 로 바뀌는 전이 온도는 KNN이 220$^{\circ}C$, KNNS 가 225$^{\circ}C$로 크게 변하지 않았다.

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.293-299
• /
• 2004

Transition metal ions doped $TiO_2$ nanostructured powders were prepared with simply heating aqueous $TiOCl_2$ solutions, contained various metal ions (Ni, Al, Fe, Zr, and Nb) of 1.47 mol% added as metal-chlorides, at $100^{\circ}C$ for 4 hrs by homogeneous precipitation process under suppressing conditions of water vaporization. The characterizations for prepared $TiO_2$ powders were carried out to observe doping of metal ions, their concentrations and microstructures using XRD, UV-VIS (DRS), XPS, SEM, TEM and ICP. Also, photo-oxidative abilities were evaluated by decomposition of 4-chlorophenol (4CP) under ultraviolet light irradiations. No secondary oxide phases were formed in all the $VTiO_2$ powders, showing doping with various transition metal ions. When adding ions ($Ni^{2+}$ or$ Al^{3+ }$ and $Zr^{4+}$ ) having valance states or ionic radii greatly different from those of $Ti^{4+}$ , the $TiO_2$ powders of mixed anatase and rutile phases were formed, whereas in the case of additions of $^Fe{3+ }$ and $Nb^{ 5+}$ as well as no addition of metal ion the powders with pure rutile phase alone were formed. Among the prepared $TiO_2$ powders, Ni$^{2+}$ doped $TiO_2$ powders, containing a small amount of anatase phase, showed excellent photo-oxidative ability in 4CP decomposition because of relative decreases in electron-hole recombination and poisoning of $TiO_2$ surface during the photoreaction.n.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.5
• /
• pp.417-421
• /
• 2006

In this study, in order to develop low temperature sintering piezoelectric ceramics for LTCC (Low-Temperature Cofired Ceramic) multilayer piezoelectric actuator, PMW-PMN-PZT ceramics using $0.2wt%\; Li_2CO_3$ and $0.25wt%\;CaCO_3$ as sintering aids were investigated according to the varation of PMW substution. Composition ceramics could be sintered at $900^{\circ}C$ by adding sintering aids. As the amount of PMW substitution increased, the crystal structure of PMW-PMN-PZT ceramics moved from tetragonal phase to rhombohedral phase gradually, and MPB(Morphotrophic Phase Boundary) region appeared at 2 mol% PMW substitution. At the sintering temperature of $900^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}r$), piezoelectric constant(d33) and Curie temperature(Tc) of 2 mol% PMW substituted PMW-PMN-PZT ceramics showed the optimal values of $7.88g/cm^3$, 0.58, 1002, 1264, 352 pC/N and $336^{\circ}C$, respectively, for LTCC multilayer piezoelectric actuator application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.126-130
• /
• 2008

In this study, in order to develop low loss multilayer piezoelectric actuator, PZN-PZT ceramics were fabricated using $Li_2CO_3,\;Bi_2O_3$, CuO and ZnO as sintering aids, their structural, piezoelectric and dielectric characteristics were investigated according to the amount of ZnO addition, At the sintering temperature of $870^{\circ}C$, the density, electromechanical coupling factor(kp), mechanical quality factor(Qm), dielectric constant(${\epsilon}_r$) and piezoelectric constant($d_{33}$) of 0.4 wt% ZnO added specimen (sintered at $870^{\circ}C$) showed the optimum value of $7.812g/cm^3$, 0.535, 916, 1399, 335 pC/N respectively. Taking into consideration above piezoelectric properties of the specimen sintered at low temperature, it was concluded that PZN-PZT ceramics using 0.4 wt% ZnO as additive showed the optimum characteristics as the composition ceramics for low loss multilayer piezoelectric actuator application.

• Korean Journal of Materials Research
• /
• v.29 no.10
• /
• pp.586-591
• /
• 2019

This study describes the doping effect of $Yb_2O_3$ on microstructure, electrical and dielectric properties of $ZnO-V_2O_5-MnO_2-Nb_2O_5$ (ZVMN) ceramic semiconductors sintered at a temperature as low as $900^{\circ}C$. As the doping content of $Yb_2O_3$ increases, the ceramic density slightly increases from 5.50 to $5.54g/cm^3$; also, the average ZnO grain size is in the range of $5.3-5.6{\mu}m$. The switching voltage increases from 4,874 to 5,494 V/cm when the doping content of $Yb_2O_3$ is less than 0.1 mol%, whereas further doping decreases this value. The ZVMN ceramic semiconductors doped with 0.1 mol% $Yb_2O_3$ reveal an excellent nonohmic coefficient as high as 70. The donor density of ZnO gain increases in the range of $2.46-7.41{\times}10^{17}cm^{-3}$ with increasing doping content of $Yb_2O_3$ and the potential barrier height and surface state density at the grain boundaries exhibits a maximum value (1.25 eV) at 0.1 mol%. The dielectric constant (at 1 kHz) decreases from 592.7 to 501.4 until the doping content of $Yb_2O_3$ reaches 0.1 mol%, whereas further doping increases it. The value of $tan{\delta}$ increases from 0.209 to 0.268 with the doping content of $Yb_2O_3$.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.959-964
• /
• 2022

Lead is an important material, both for fusion or fission reactors. The cross sections of natural lead should be validated because lead is a main component of lithium-lead modules suggested for fusion power plants and it directly affects the crucial variable, tritium breeding ratio. The presented study discusses a validation of the lead transport libraries by dint of the activation of carefully selected activation samples. The high emission standard ²⁵²Cf neutron source was used as a neutron source for the presented validation experiment. In the irradiation setup, the samples were placed behind 5 and 10 cm of the lead material. Samples were measured using a gamma spectrometry to infer the reaction rate and compared with MCNP6 calculations using ENDF/B-VIII.0 lead cross sections. The experiment used validated IRDFF-II dosimetric reactions to validate lead cross sections, namely ¹⁹⁷Au(n, 2n)¹⁹⁶Au, ⁵⁸Ni(n,p)⁵⁸Co, ⁹³Nb(n, 2n)^92mNb, ¹¹⁵In(n,n')^115mIn, ¹¹⁵In(n,γ)^116mIn, ¹⁹⁷Au(n,γ)¹⁹⁸Au and ⁶³Cu(n,γ)⁶⁴Cu reactions. The threshold reactions agree reasonably with calculations; however, the experimental data suggests a higher thermal neutron flux behind lead bricks. The paper also suggests ²⁵²Cf isotropic source as a valuable tool for validation of some cross-sections important for fusion applications, i.e. reactions on structural materials, e.g. Cu, Pb, etc.