• Title/Summary/Keyword: g-g-g Diagram

검색결과 203건 처리시간 0.028초

리튬함유 폐액으로부터 D2EHPA에 의한 리튬의 회수 (Recovery of Li from the Lithium Containing Waste Solution by D2EHPA)

  • 안효진;안재우;이기웅;손현태
    • 자원리싸이클링
    • /
    • 제23권5호
    • /
    • pp.21-27
    • /
    • 2014
  • 리튬함유 폐액에서 $D_2EHPA$를 추출제로 사용하여 용매추출법에 의해 리튬의 회수에 관한 연구를 실시하였다. 수용액상의 pH, 추출제 농도 및 상비 변화 등 리튬의 추출에 영향을 미칠 수 있는 인자들에 대한 실험을 실시하였다. 실험 결과, 평형 pH가 증가할수록 리튬의 추출율이 증가하였고, pH 6.0에서 20% $D_2EHPA$에 의해 최대 50%의 리튬 추출율을 보였다. McCabe-Thiele diagram 분석으로 부터 리튬은 상비(O/A) 3.0에서 4단으로 95%이상 추출이 가능하였다. 한편 탈거액으로 황산을 사용하였고, 리튬 탈거의 최적 황산 농도는 90 ~ 120 g/L 이었다. 연속탈거 공정을 통하여 리튬이 11.85 g/L까지 농축 가능하였으며, 이 용액으로 부터 침전법에 의해 탄산리튬의 제조가 가능하였다.

미세균열의 간격 분포를 이용한 결의 평가 (III) (Evaluation for Rock Cleavage Using Distribution of Microcrack Spacings (III))

  • 박덕원
    • 암석학회지
    • /
    • 제25권4호
    • /
    • pp.311-324
    • /
    • 2016
  • 거창지역의 쥬라기 화강암에서 발달하는 결의 특성을 분석하였다. 3개 면 및 3개 결에 대한 평가는 (1) 간격의 값 그리고 길이의 값 사이의 감소비율, (2) 미세균열의 간격의 빈도수(N), (3) 총 간격($1mm{\geq}$), (4) 지수의 상수(a), (5) 지수(${\lambda}$)의 크기, (6) 평균 간격($S_{mean}$), (7) 평균 간격과 중앙 간격($S_{median}$) 사이의 차이 값($S_{mean}-S_{median}$) 및 (8) 간격의 밀도(${\rho}$)와 같은 파라미터를 이용하여 수행하였다. 특히 상기 간격의 파라미터 그리고 간격-누적빈도 도표에서 도출한 파라미터 사이의 밀접한 상관성을 도출하였다. 3개 채석면 그리고 3개 결을 대변하는 판별요소들은 이러한 상호 대비를 통하여 획득하였다. 이 연구의 분석 결과를 요약하면 다음과 같다. 첫째, 3개 결에 대한 빈도수, 평균값, 중앙값, 상기 차이값($S_{mean}-S_{median}$) 및 밀도의 감소비율은 G(2번 결, (G1 + G2)/2) < H(3번 결, (H1 + H2)/2) $\ll$ R(1번 결, (R1 + R2)/2), H < G $\ll$ R, H < G $\ll$ R, H < G < R 및 H < G $\ll$ R의 순이다. 3개 면에 대한 상기 5개 파라미터의 값은 R'(1번 면) $\ll$ H'(3번 면) < G'(2번 면), R' $\ll$ G'< H', R' < H' < G', R' < G' < H' 및 R' $\ll$ H' < G'의 다양한 순을 각각 보여준다. 둘째, (I) 파라미터(2, 3, 4 및 5) 및 (II) 파라미터(6, 7 및 8)의 값은 (I) H < G < R 및 (II) R < G < H의 순서이다. 반면에 3개 면에 대한 상기 두 그룹(I~II)의 파라미터의 값은 역순을 보여준다. 셋째, 여섯도표 사이의 전체적인 배열 특성을 살펴보면, 이들 도표들은 관계도에서 R2 < R1 < G2 < G1 < H2 < H1의 순을 보여 준다. 즉, 상기 여섯 도표는 1번 결(R1 + R2) < 2번 결(G1 + G2) < 3번 결(H1 + H2)의 순으로 요약될 수 있다. 이러한 결과는 미세균열의 간격과 관련된 결의 상대적인 강도를 지시한다. 특히 각 도표의 두 파라미터, 상기 차이값($S_{mean}-S_{median}$) 그리고 평균 간격은 도표 사이의 배열 순위의 예측에 대한 사전 정보를 제공할 수 있다. 마지막으로, 3개 면 그리고 3개 결의 종합도를 작성하였다. 관계도에서, 3개 결에 대한 3개 지수 직선의 순서는 R(R1 + R2) < G(G1 + G2) < H(H1 + H2)의 순을 보여준다. 반면에, 3개 면에 대한 3개 지수 직선은 H'(R2 + G2) < G'(R1 + H2) < R'(G1 + H1)의 순을 보여준다. 따라서 관계도로 부터 3개 면 및 3개 결 사이의 상호 역순의 상관성을 도출할 수 있다.

파라쿼트 농도에 따른 HepG2 세포의 물리적 특성 변화와 실시간 모폴로지 관찰 (Physical Property and Morphology Observation of HepG2 Cells by Various Concentration of Paraquat)

  • 이동윤;강현욱;;권영수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.1232_1233
    • /
    • 2009
  • Paraquat is well-known to cause hepatotoxic responses in human and other mammal species. In solution, it forms free radicals and charge-transfer complex of which formation plays an important role in determination of its biological activity in the presence of various anions. The HepG2 cells were cultured onto a quartz crystal sensor which is possible to detect the density and a viscosity changes using the resonance frequency (F) and the resonance resistance (R). The plot of F-R diagram is able to explain the rheological change of cells onto the surface of the quartz crystal sensor. In this paper, we investigated the physical properties of the HepG2 cells cultured onto a ITO electrode of the quartz crystal sensor according to the paraquat injection at various concentrations (100 mM, 10 mM, 1 mM). We also observed the morphological changes with a micro CCD camera, simultaneously. The HepG2 cells were cultured onto the ITO electrode surface of the quartz crystal modified a collagen film in $CO_2$ incubator. After the paraquat injection, we observed the changes of the morphologies by the micro CCD camera depending on time and analyzed the physical changes of cells on the electrode surface of quartz crystal using F-R diagram. From all results, we proved the effect of paraquat at various concentrations which is led to an apoptosis such as weakening and death of the cells by oxidation and reduction reaction that were produced the superoxide anions and other free radicals.

  • PDF

Epoxy Molding Compound의 경화거동에 관한 연구 (A Study on the Cure Behavior of Epoxy Molding Compound)

  • 윤상영;오명숙;박내정
    • 폴리머
    • /
    • 제24권6호
    • /
    • pp.837-844
    • /
    • 2000
  • 본 연구에서는 반도체 봉지제로 사용되는 상용 EMC중 가속제의 함량이 다른 두 종류의 프리프레그에 대하여 그 경화거동을 등온 및 승온조건에서 시차 주사 역량계, 점도계 및 유전율 측정계를 이용하여 분석하였다. 경화반응 속도변수는 Kamal의 자동촉매 반응식을 이용하여 m+n을 2로 가정한 후 Ryan Dutta의 방법에 따라 계산에 의한 경화반응 속도의 예측 치와 실제 실험 데이터가 10$0^{\circ}C$를 제외한 나머지 온도에서는 잘 일치하는 경향을 나타내었다. 경화과정 중 겔화와 유리화와 같은 상 전이를 관찰하였으며 각각의 등온 경화온도에서 경화시간에 따른 유리전이 온도 ($T_{g}$ )를 측정하여 경화온도와 유리전이 온도가 같아지는 유리화점을 구할 수 있었고 절대온도와의 사이에 Arrhenius관계가 성립함을 확인하였다. 또한 평판형 전극을 이용한 DEA는 EMC의 경화 과정을 동정하는데 효과적으로 이용될 수 있음을 알 수 있었다. 같은 종류의 수지 시스템에서는 TTT diagram상에서 $_{gel}$$T_{g}$ 가속제의 농도에 상관없이 일정한 온도에서 나타남을 확인하였다.

  • PDF

붕소함유 냉간단조용 비조질강의 경화능 및 기계적 특성평가 (Characterization of Hardenability and Mechanical Properties of B-Bearing Microalloyed Steels for Cold Forging)

  • 박현균;김남규;최회진
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2004년도 춘계학술대회 논문집
    • /
    • pp.395-399
    • /
    • 2004
  • Four microalloyed steels containing B were investigated in terms of hardenability, mechanical properties and microstructure depending upon the cooling rates in order to develop the steel grade for the cold forged fasners. The alloy with the largest DI value among 4 alloys, which contains $0.12\%\;C,\;1.54\%\;Mn,\;0.65\%\;Cr,\;0.11\%V,\;0.040\%Ti\;and\;0.0033\%B$, showed the larest shift to the right hand side in the TTT diagram, implying the wide allowable cooling rate range subsequent to hot rolling in long bar processing, Mechanical tests indicated that yield strength are dependent upon the DI value in water quenched specimens but other properties showed almost the same values. In the same grade of steel, the increase in cooling rates causes the decrease in elongation but the increase in strength, reduction of area and Charpy impact values. Microstructural examination in steel grade with the larest DI values revealed martensitic structure In the water quenched state, a mixture of martensite and bainite in the oil quenched, and ferrite + pearlite in the air cooled and the forced air cooled but the latter showed finer microstructure.

  • PDF

겨울철 부산항 주변해역의 수질과 표층퇴적물 환경특성 (Environmental Characteristics of the Seawater and Surface Sediment in the vicinity of Pusan Harbor Area in Winter)

  • 박영철;양한섭;이필용;김평중
    • 한국수산과학회지
    • /
    • 제28권5호
    • /
    • pp.577-588
    • /
    • 1995
  • 부산항 주변 해역의 이화학적 특성을 파악하기 위하여 1992년 12원에 해수 및 표층 퇴적물중 오염지표 항목들을 측정하였다. 염분과 영양염류, AOU와 영양염류의 상관관계로 보아 겨울철 부산항에서 영양염류의 농도는 주로 도시하수의 유입에 의해 좌우되며, 수주내의 유기물 분해와 같은 생화학적 과정에 의한 영양염 재생에 따른 영향도 다소 나타나고 있다. 부영양화 지수 (TSI)는 평균 33.6 (범위 0.5-258.1)이고, 북외항, 북내항, 남항 및 감천항에서 각각 평균 19, 50, 56 및 5로 남항에서 가장 높은 부영양화 지수를 보인다. 표층퇴적물중의 총강열감량, COD 및 총황화물의 평균 농도는 각각 $12.1\%$, 17.5mg/g.dry 및 1.18mg/g.dry 였으며 북내항에서 가장 높다 그리고, Ro(1975)의 자료에 비해 총강열감량과 COD는 북내항에서 2-3배정도 높은 농도를 보인다. 표층 퇴적물중 총유기탄소와 총유기 질소 및 총인의 평균 농도는 각각 24.9, 1.3 및 0.69mg/g.dry 였으며, 총유기탄소와 총인의 농도는 남항에서 가장 높은 농도를 보인 반면에, 총유기질소의 농도는 북내항에서 가장 높은 농도를 보였다. 특히 부산항 퇴적물중 TOC/TON 비값은 평균 22.5 (범위 10.2-60.2)로서 육상기원 유기물질의 퇴적이 우세하였다.

  • PDF

POLYNOMIAL INVARIANTS FOR VIRTUAL KNOTS VIA VIRTUALIZATION MOVES

  • Im, Young Ho;Kim, Sera
    • East Asian mathematical journal
    • /
    • 제36권5호
    • /
    • pp.537-545
    • /
    • 2020
  • We investigate some polynomial invariants for virtual knots via virtualization moves. We define two types of polynomials WG(t) and S2G(t) from the definition of the index polynomial for virtual knots. And we show that they are invariants for virtual knots on the quotient ring Z[t±1]/I where I is an ideal generated by t2 - 1.

Establishing CCT Diagrams for Sinter Hardening Grade Cr-Mo Prealloyed Steels

  • Stetina, G.;Kalss, G.;Gierl, C.;Danninger, H.;Orth, P.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.836-837
    • /
    • 2006
  • A CCT diagram for Cr-Mo prealloyed sintered steels suitable for sinter hardening was established by combining dilatometry data, microstructural studies and microhardness measurements of the material. CCT diagrams deepen the understanding of material properties after sinter hardening and support the design of materials on an industrial scale by providing information about required cooling rates for successful sinter hardening of these materials.

  • PDF

우리나라 국민학생의 스트레스에 관한 연구 (A Study on Stress of Primary Students in Korea)

  • 김무채;김정근;김지주
    • 한국학교보건학회지
    • /
    • 제6권1호
    • /
    • pp.78-92
    • /
    • 1993
  • The purpose of this study is to find out the stress causes of the primary students in Korea, through the three major methods, life event score, multiple regression about stress causes and G.H.Q. path-diagram. A survey was made of 889 students who were selected among students of six primary schools in seoul and Ka-pyeng, from Sep. 28 to Oct. 2. 1992. The results of this study are summarized as follows : 1. Life event score Among the children's life events, (deaths of family) (degrade of school record) (the increase of absence days) (divorce of parents) (trouble with relationship) are high ranking in life event score. Besides, (scolded by teacher and parents) (beginning of extracurricular work) are spread stress causes. In conclusion, these stress causes are shown by two aspects, home, school, and so children are under stress circumstance in both places. These stress causes vary with area and sex. 2. Multiple regression about stress causes and G.H.Q. This study analysed how a stress caused by home life affects the children's health of mind and body. The most influential factors are , and these factors vary with area and sex. 3. Path-diagram This study proved that socio-psychological school environment raises children to secede from school, and this secession that operates as a stress cause affects children's health of mind and body. This serial process is analysed by path analysis, and made out a path-diagram. In conclusion, as expected socio-psychological,school environment affects the children's health of mind and body. This is shown by two aspects : positive, negative. This stress causes vary with area and sex.

  • PDF