• Journal of Korea Foundry Society
• /
• v.10 no.1
• /
• pp.57-63
• /
• 1990

Continuous casting of the $Al-CuAl_2$ eutectic composite was carried out by the upward continuous casting process. The morphology of the eutectic growth and the stability of solid-liquid interface were investigated under various growth conditions. It was possible to get the planar solid-liquid interface at the condition of $G_L/R$＝$3.6{\times}10^3^{\circ}Csec/mm^2$. And the colony structures were formed at the conditions of $G_L/R$ < $R=0.33{\times}10^3^{\circ}Csec/mm^2$. The inter-lamellar spacing of $Al-CuAl_2$ eutectic composite was decreased with the increase of pulling speed. The reduction of inter-lamellar spacing & value of $G_L/R$ caused the increase of ultimate tensile strength and Rockwell hardness in $Al-CuAl_2$ eutectic composite.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.3
• /
• pp.179-184
• /
• 1982

The behavior of continuous flow culture of Lartobacillus bulgricus was investigated by application of Monod's kinetic model. The parameters obtained from Monod's chemostat theory successfully predicted the behavior of the chemostat. Then, it was found that Monod's kinetics were applicable to the growth rate dependence on glucose concentration. Under steady-state condition, the maximum growth rate, saturation constant, and wash out were found to be 0.62/hr, 7.69 g/1, 0.51/hr of continuous culture. And the optimum condition for the highest cell production was 0.41/hr in dilution rate, and at that point the cell production rate was 0.178g/1 hr.

• The Korean Journal of Pain
• /
• v.9 no.2
• /
• pp.374-379
• /
• 1996

Background: Recently, improvements in drug administration technology have intensified interest in the treatment of postoperative pain. this has resulted in increased use of continuous intravenous infusion of opioid and epidural opioid as alternative to traditional intramuscular administration of opioid. The goal of this study, therefore, was to document the effects of pain control and side effects following continuous intravenous infusion of morphine or meperidine and intramuscular meperidine following cesarean section. Methods: The vital signs, pain score, oxygen saturation and side effects were compared in 150 patients receiving continuous intravenous infusion of morphine, 30 ${\mu}g/kg/hr$ (n=50, group 1); continuous intravenous infusion of meperidine, 150 ${\mu}g/kg/hr$ (n=50, group 2); or intramuscular meperidine, 50mg/every 6hrs (n=50, group 3). Results: VAS (Visual Analogue Scale) was significantly decreased after 30 minutes of administration in all three groups and was significantly lower at 1 hour, but higher at 6 hours in group 3 than two other groups. Severe desaturation episode, defined as $SpO_2$<90%, occurred in the group 3(0.2%). Moderate desaturation episodes, defined as $SpO_2$ 91~95%, occurred more in group 3 than in group 1 and 2 (17.4% vs. 10.4%, 8.2%). The incidence of side effects were similar among three groups. Conclusion: The continuous infusion of opioid was more effective and safe method of postoperative pain control than traditional intramuscular injection.

• Transactions of Materials Processing
• /
• v.8 no.3
• /
• pp.237-244
• /
• 1999

The purpose of this research is for the development of a new type forging equipment. H.C.G.(Hyundai Continuous Grain-Flow), by using two virtual build-up tools, rigid viscoplastic FEM and downsized plasticine experiment. This forging method consists of only vertical pressuree. Therefore, high quality crankshafts can be forged with this method as it can maintain a continuous grain flow. The factors considered in the development of equipment are die geometry for flawless deformed shape, die reaction forces, stress/strain distributions and continuous material flow. We carried out several numerical simulations and downsized plasticine experiments for the proper design of the forging equipment. The validity of those simulation results is confirmed by checking with the actual test results. Based on these simulation results, the proper design of the H.C.G. forging equipment is enabled.

• Journal of the Korean Mathematical Society
• /
• v.51 no.4
• /
• pp.791-815
• /
• 2014

We show amongst other that if $f,g:[a,b]{\rightarrow}\mathbb{C}$ are two functions of bounded variation and such that the Riemann-Stieltjes integral $\int_a^bf(t)dg(t)$ exists, then for any continuous functions $h:[a,b]{\rightarrow}\mathbb{C}$, the Riemann-Stieltjes integral $\int_{a}^{b}h(t)d(f(t)g(t))$ exists and $${\int}_a^bh(t)d(f(t)g(t))={\int}_a^bh(t)f(t)d(g(t))+{\int}_a^bh(t)g(t)d(f(t))$$. Using this identity we then provide sharp upper bounds for the quantity $$\|\int_a^bh(t)d(f(t)g(t))\|$$ and apply them for trapezoid and Ostrowski type inequalities. Some applications for continuous functions of selfadjoint operators on complex Hilbert spaces are given as well.

• Journal of Environmental Health Sciences
• /
• v.30 no.3
• /
• pp.230-238
• /
• 2004

The adverse health effects of a number of environment pollutions are related to the formation of free radicals. Induction of antioxidant defensive system in the response to an oxidative attack is an essential element of the cell to survive. CYP2E1 is easily induced by organic solvents and induces continuous formation of reactive oxygen species (ROS). ${\gamma}$-Glutamyltranspeptidase (${\gamma}$GT) plays an important role in glutathione metabolism and xenobiotic detoxification. To evaluate the characteristic of oxidative stress which induces GGT expression and to understand human antioxidant defensive response against oxidative stress induced by CYP2E1, we studied regulation of ${\gamma}$GT enzyme expression in response to various oxidative stresses in human HepG2 cells. The ${\gamma}$GT activity was not modified after exposure of acute oxidative stress inducing agents (ferric nitrilotriacetate, cumene hydroperoxide, ADP-Fe, O-tetradecanoylphorbol-13-acetate, tumor necrosis factor-alpha). To induce continuous exposure of cells to ROS, HepG2 cells were transfected by human CYP2E1 gene transiently. The CYP2E1 activity was verified with chlorzoxazone hydroxylation. Transfection of CYP2E1 showed continuous 60% increase in intracellular ROS and 240 % increase in microsomal ROS. CYP2E1 overexpressing cells showed increased ${\gamma}$GT activity (2.5-fold). The observed enhancement of ${\gamma}$GT activity correlated with a significant increase of ${\gamma}$GT mRNA (2.1-fold). Treatment with antioxidant strongly prevented the increase in ${\gamma}$GT activity. The CYP2E1 overexpression did not modify toxicity index and increased glutathione levels. These results show that continuous exposure of cells to ROS produced by CYP2E1 up-regulates ${\gamma}$GT; This may be one of the adaptive antioxidant responses of cells to oxidative insult. Present study also suggests that the induction of ${\gamma}$GT could be used as a marker of oxidative stress induced by exposure to organic solvents.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.4
• /
• pp.482-487
• /
• 1999

The Pseudomonas sp. strain NGK1 (NCIM 5120) was immobilized in calcium alginate, agar, and polyacrylamide gel matrices. The salicylic acid-producing capacity of freely suspended cells was compared with immobilized cells in batches with a shake culture and continuous culture system in a packed bed reactor. Freely suspended cells ($4\times10^{10}cfu/ml$) produced 12 mM of salicylic acid, whereas cells immobilized in calcium alginate ($1.8\times10^{11}$cfu/g beads), agar ($1.8\times10^{11}$cfu/g beads), and polyacrylamide ($1.6\times10^{11}$cfu/g beads) produced 15, 11, and 16mM of salicylic acid, respectively, from naphthalene at an initial concentration of 25 mM. The continuous production of salicylic acid from naphthalene was investigated in a continuous packed bed reactor with two different cell populations. The longevity of the salicylic acid-producing activity of the immobilized cells from naphthalene was also studied in semi continuous fermentations. The immobilized cells could be reused 18, 13, and more than 20 times without losing salicylic acid-producing activity in calcium alginate-,agar-, and polyacrylamide-entrapped cells, respectively. The study reveals a more efficient utilization of naphthalene and salicylic acid production by the immobilized Pseudomonas sp. strain NGK1 as compared to the free cells.

• Kyungpook Mathematical Journal
• /
• v.45 no.1
• /
• pp.13-19
• /
• 2005

In this paper we introduce the notions of g-regularity and g-normality in fuzzy topological spaces. We obtain some characterizations and several preservation theorems of such spaces.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.139-143
• /
• 1992

One of the objectives of this work is to obtain information relevant to the industrial production of alcohol from sugar. The fermentation of alcohol by a strain of saccharomycess cerevisiae ATCC 24858 was studied In a continuous single-stage process with recycle of the cells via tangential flow microfiltration membranes. The experimental results reported in this study pertain to continuous cultures with total cell-recycle by varying the dilution rate (D=0.3, 0.5, and 0.7 $hr^{-1}$) and glucose concentration (50, 100, 150, and 200g/l sugar solution). Productivity using a repeated cell recycle system was found extremely high, 1.e., over 10 to 29 times higher than that of a smile batch system. When a sugar concentration of 200g/1 at dilution rate, 0.7 hr-1 was used, 83.9g/l ethanol was formed with an ethanol yield of 0.42(82% of theoretical) based on sugars utilized.

• Microbiology and Biotechnology Letters
• /
• v.19 no.5
• /
• pp.487-490
• /
• 1991

In this study continuous alcohol fermentation of molasses by the recirculation system has investigated. After cultivation of yeast cells in the YPD medium with increasing the medium concentration from 10 to 183.5 g/l stepwisely, the fermentation medium was replaced by molasses. The maximum cell mass was 25 g/l, and the mean cell mass during the operation was 23.5g/1, which was 3.4 times higher compared with a conventional batch system. The optimum fermentation conditions with feeding molasses of 180 g/l were obtained when the fermentation was carried out at 500 rpm and at the dilution rate of 0.037 $h^{-1}$. Under these conditions we could safely operate the fermentor for 645 h without any trouble. The maximum alcohol productivity was 4.9 g$l\cdot h$ with an alcohol concentration of 53.9 g/l at the dilution rate of 0.091$h^{-1}$.