• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.124-129
• /
• 2010

The direct injection (DI) diesel engine has become a prime candidate for future transportation needs because of its high thermal efficiency. However, nitrogen oxides (NOx) increase in the local high temperature regions and particulate matter (PM) increases in the diffusion flame region within diesel combustion. Therefore, the demand for developing hybrid system consist of exhaust gas recirculation (EGR) and aftertreatment system as well as diesel particulate filter (DPF) or lean NOx trap (LNT) should be applied. The variation of EGR rate due to the malfunction of EGR valve can affect not only the combustion stability of engine but also the performance of aftertreatment system. In this research, 2.0 liter 4-cylinder turbocharged diesel engine was used to investigate the combustion and emission characteristics for various operating conditions with EGR. While the fuel consumption was increased with increase of EGR rate, NOx emission was improved by maximum 90% at low speed, low load operating condition. To achieve combustion stability and reliability of aftertrearment system with minimum penalty in fuel consumption and emissions, the fault diagnosis of EGR malfunction must be employed.

• Nuclear Engineering and Technology
• /
• 제38권1호
• /
• pp.45-60
• /
• 2006

Presently, the VHTGR (Very High Temperature Gas-cooled Reactor) is considered the most attractive candidate for a GEN-IV reactor to produce hydrogen, which will be a key resource for future energy production. A new concept for a reactor cavity cooling system (RCCS), a critical safety feature in the VHTGR, is proposed in the present study. The proposed RCCS consists of passive water pool and active air cooling systems. These are employed to overcome the poor cooling capability of the air-cooled RCCS and the complex cavity structures of the water-cooled RCCS. In order to estimate the licensibility of the proposed design, its performance and integrity were tested experimentally with a reduced-scale mock-up facility, as well as with a separate-effect test facility (SET) for the 1/4 water pool of the RCCS-SNU to examine the heat transfer and pressure drop and code capability. This paper presents the test results for SET and validation of MARS-GCR, a system code for the safety analysis of a HTGR. In addition, CFX5.7, a computational fluid dynamics code, was also used for the code-to-code benchmark of MARS-GCR. From the present experimental and numerical studies, the efficacy of MARS-GCR in application to determining the optimal design of complicated systems such as a RCCS and evaluation of their feasibility has been validated.

• 한국항행학회논문지
• /
• 제16권4호
• /
• pp.593-601
• /
• 2012

본 논문에서는 미래의 다중 Global Navigation Sattelite System (GNSS) 및 다중 주파수 항법신호 사용자를 위한 새로운 다중 가설 사용자 무결성 감시 기법을 제안한다. 기존의 Weighted Least Squares (WLS) 사용자 무결성 감시 (Receiver Autonomous Integrity Monitoring, RAIM) 기법은 동시에 두 개 이상의 위성이 고장 나지 않는다는 가정 하에 사용자 측정치의 무결성을 감시하므로 동시에 두 개 이상의 측정치 이상이 발생하였을 때 적절한 대응을 할 수 없다는 문제가 있다. 본 논문에서는 여러 epoch의 측정치 잔차와 위성 관측행렬의 변화량을 활용하여 단일 고장 뿐만 아니라 다중 고장을 효율적으로 검출할 수 있는 기법을 제안하였다. 제안된 기법은 반송파 위상 측정치의 변화율을 활용하는 Relative RAIM (RRAIM) 기법을 적용하여 최소 검출가능 바이어스 (Minimum Detectable Bias, MDB)의 크기를 최소화하였고, 시뮬레이션 결과 수 십 m 정도 크기의 다중 고장을 검출할 수 있었다.

• Journal of Information Technology Applications and Management
• /
• 제22권2호
• /
• pp.201-217
• /
• 2015

In this paper, we report computational testing result to examine the validity of firm's bankruptcy risk estimation through quantification of supply chain risk. Supply chain risk in this study refers to upstream supply risk and downstream demand risk, To assess the firm's risk affected by supply chain risk, we adopt unit of analysis as industry level. since supply and demand relationships of the firm could be generalized by the industry input-output table and the availability of various valid economic indicators which are chronologically calculated. The research model to estimate firm's risk level is the linear regression model to assess the industry bankruptcy risk estimation of the focal firm's industry with the independent variables which could quantitatively reflect demand and supply risk of the industry. The publicly announced macro economic indicators are selected as the candidate independent variables and validated through empirical testing. To validate our approach, in this paper, we confined our research scope to steel industry sector and its related industry sectors, and implemented the research model. The empirical testing results provide useful insights to further refine the research model as the valid forecasting mechanism to capture firm's future risk estimation more accurately by adopting supply chain industry risk aspect, in conjunction with firm's financial and other managerial factors.

• KSBB Journal
• /
• 제27권2호
• /
• pp.121-126
• /
• 2012

In order to explore structural features of minoxidil analogs with a view of enhancing lysyl hydroxylase (LH) inhibitory activity, molecular holographic QSAR (HQSAR) and CoMSIA (comparative molecular similarity indices analysis) were performed. The results from the atomic contributions with optimized the HQSAR 6-2 model indicated that, in case of pyrimidine-1-N-oxide substituent, C2 atom of pyrimidine ring and C'3-C'4 bond of 4-piperidinol group showed the highest impact on the inhibitory activity towards LH enzyme. It was also evident from the information of the optimized CoMSIA F5 model that the inhibitory activity mainly depended on the hydrophobic field contribution (36%) and the hydrogen bond (H-bond) field contribution (49.2%) of substrate molecule. Particularly, it is predicted that the functional groups which disfavor H-bond acceptors in large space around the piperidinol group and also the functional groups which favor the H-bond acceptors at C'4 (& C'5) atom in $R_5$ group play a role for increased inhibitory activity. With this in mind, it is likely that a novel candidate having more improved inhibitory activity on hair growth could be designed in the future.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.27-35
• /
• 2013

SCR (Selective Catalytic Reduction) on DPF (Diesel Particulate Filter) is a multi-functional after-treatment device which integrates soot filtration and DeNOx function into a single can. Because of its advantage in package and cost, the SCR on DPF is considered as a potential candidate for future application. It inherently employes wall flow type monolithic reactor so ash included in exhaust gas may deposit inside the inlet channel of this device. This study is intended to identify the impact of ash deposit on SCR reaction under wall flow type monolithic reactor. Simulation approach is used so relevant species transport equations for wall flow type monolith is derived. These equations can be solved together with momentum conservation equations and give solution for conversion performance. Both ash deposit and clean catalyst case are simulated and comparison of these two cases gives an insight for the impact of ash deposit on conversion performance. Ash deposit can be classified as ash layer and ash plug. and impact of ash deposit is described along with different morphology of ash deposit.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.142-148
• /
• 2009

The direct injection(DI) diesel engine has become a prime candidate for future transportation needs because of its high thermal efficiency. However, nitrogen oxides(NOx) increase in the local high temperature regions and particulate matter (PM) increases in the diffusion flame region within diesel combustion. Therefore, the demand for developing a suitable after treatment device has been increased. NOx absorbing catalysts are based on the concept of NOx storage and release making it possible to reduce NOx emission in net oxidizing gas conditions. This De-NOx system, called the LNT(Lean NOx Trap) catalyst, absorbs NOx in lean exhaust gas conditions and release it in rich conditions. This technology can give high NOx conversion efficiency, but the right amount of reducing agent should be supplied into the catalytic converter at the right time. In this research, a performance characteristics of LNT with a hydrogen enriched gas as a reductant was examined and strategies of controlling the injection and rich exhaust gas condition were studied. The NOx reduction efficiency is closely connected to the injection timing and duration of reductant. LNT can reduce NOx efficiently with only 1 % fuel penalty.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.262-263
• /
• 2011

Flexible electronics, a future technology of electronics, require a low cost integrated circuit that can be built on various types of the flexible substrates. As a potential candidate for this application, a single walled carbon nanotube network is studied as an active device with a scheme of thin film transistor. Transistors are formed on a plastic foil by the Roll-to-Roll (R2R) and the Roll-to-Device (R2D) printing method. For both printing methods, electrical transports for the transistors are presented with the temperature dependence of threshold voltage (V_Th) and mobility from the measured transfer curves at temperatures ranging from 10 K to 300 K. It is observed that ${\mu}=0.044cm^2/V{\cdot}sec$ and V_Th=7.28V for R2R and ${\mu}=0.025cm^2/V{\cdot}sec$ and V_Th=3.10V for R2D, both for the temperature at 300K. Temperature dependence of mobility and V_Th is observed. However for R2R, the temperature dependence of V_Th is constant. It is the difference between, R2R and R2D.

• 방사성폐기물학회지
• /
• 제21권1호
• /
• pp.149-164
• /
• 2023

As part of the safety case development for generic disposal sites in Korea, it is necessary to develop generic assessment models using various geosphere-biosphere interfaces (GBIs) and potentially exposed groups (PEGs) that reflect the natural environmental characteristics and the lifestyles of people in Korea. In this study, a unique modeling strategy was developed to systematically construct and select Korean generic biosphere assessment models. The strategy includes three process steps (combination, screening, and experts' scoring) for the biosphere system conditions. First, various conditions, such as climate, topography, GBIs, and PEGs, were combined in the biosphere system. Second, the combined calculation cases were configured into interrelation matrices to screen out some calculation cases that were highly unlikely or less significant in terms of the exposure dose. Finally, the selected calculation cases were prioritized based on expert judgment by scoring the knowledge, probability, and importance. The results of this study can be implemented in the development of biosphere assessment models for Korean generic sites. It is believed that this systematic methodology for selecting the candidate calculation cases can contribute to increasing the confidence of future site-specific biosphere assessment models.

• 대한조선학회논문집
• /
• 제61권3호
• /
• pp.185-199
• /
• 2024

Global warming impacts every corner of human life. Maritime transportation and shipbuilding industries are no exception. Recent counteraction in maritime industries is accelerating to meet the zero emission by 2050. Various alternative energy sources have been studied, and recent developments in Europe show that the windship, as a proven technology, can be an attractive candidate to solve the problem. In this paper, as the alternative transportation option, to infer the performances of modern windships, the non-dimensional ratios of past tall ships and windships are studied and reviewed. In addition, the ratios are compared to estimate the position of current and future windships under consideration. It is found that regarding the ratio distributions, the current windships being planned can be either wind-assisted propulsion ships or less fully functional windships than the past tall ships.