• 한국CDE학회논문집
• /
• 제22권1호
• /
• pp.37-43
• /
• 2017

3D printing techniques can be used in various application fields and many researches have been reported. FDM (Fused Deposition modeling) can make multi-material or multi-color models with the simultaneous use of two or more filaments. In a dual-nozzle FDM printers, while the active nozzle is working, the remaining nozzle will be idle. The remaining molten resins inside an idle nozzle can ooze out unwantedly. The spill over from the resting nozzle produces unwanted remaining on the fabricated product. In this research, we suggest a method for optimizing building position of a model to minimize the unwanted spill-over that could possibly contaminate the final product. The method is based on minimizing the two intersection volumes. The first intersection volume is obtained by intersecting the volume defined by the first material and the Minkowski sum between the volume of the first material and the vector obtained by subtracting the center point of the first nozzle from the center point of the second nozzle. The second intersection volume can be obtained by reversing the role of the first and second volumes and nozzles. Some results obtained from the implementation using the Parasolid (Siemens) geometric modeling kernel is presented.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.62-72
• /
• 2015

Interest in three-dimensional (3D) printing processes has grown significantly, and several types have been developed. These 3D printing processes are classified as Selective Laser Sintering (SLS), Stereo-Lithography Apparatus (SLA), and Fused Deposition Modeling (FDM). SLS can be applied to many materials, but because it uses a laser-based material removal process, it is expensive. SLA enables fast and precise manufacturing, but available materials are limited. FDM printing's benefits are its reasonable price and easy accessibility. However, metal printing using FDM can involve technical problems, such as suitable component supply or the thermal expansion of the heating part. Thus, FDM printing primarily uses materials with low melting points, such as acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA) resin. In this study, an FDM process for enabling metal printing is suggested. Particularly, the nozzle and heatsink for this process are focused for stable printing. To design the nozzle and heatsink, multi-physical phenomena, including thermal expansion and heat transfer, had to be considered. Therefore, COMSOL Multiphysics, an FEM analysis program, was used to analyze the maximum temperature, thermal expansion, and principal stress. Finally, its performance was confirmed through an experiment.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.93-101
• /
• 2018

FDM is one of the popular 3D printing technologies because of an inexpensive extrusion machine and multi-material printing. FDM can use thermoplastics such as ABS and PLA. The 3D-printed ABS parts fabricated by FDM are attractive in the automotive industry because of their weight. A 10% reduction in weight can increase the fuel economy by approximately 7%. To use 3D-printed ABS parts as automotive parts, we should evaluate the 3D-printed parts in terms of automotive reliability. In this study, 3D-printed ABS samples were evaluated using Ono's rotary bending fatigue test. We obtained an S-N curve for the 3D-printed ABS specimen from the finite-element analysis. The S-N curve can be useful in early-stage design decisions for 3D-printed ABS parts.

• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1229-1235
• /
• 2015

3D 프린터를 이한 인공지지체 제작 기술은 손상된 골 조직 재생을 위해 개발되고 있다. 골 조직 재생에 적하기 위해 인공지지체는 생체적합성, 생분해성 그리고 적절한 기계적 특성을 지녀야 하며, 분한 양의 공극과 내부 연결성을 지닌 구조로 제작되어야 한다. 본 연구에서는 3 차원 이중 공극 인공지지체를 제작하기 위해서 열 해 적층법(fused deposition modeling, FDM) 기반의 폴리머 적층 시스템을 이하였다. 사된 재료는 폴리카프로락톤(polycaprolactone, PCL)과 알긴산 나트륨(sodium alginate, SA)이다. 제작된 3 차원 형상의 인공지지체에 이중 공극을 갖기 위해 염 침출법을 이하였다. 완성된 인공지지체는 주사 전자 현미경과 X 선 검출 분광기(scanning electron microscope-energy dispersive spectroscopy, SEM-EDS)를 통해 관찰하였으며, MG-63 세포를 이하여 in-vitro 평가를 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.529-530
• /
• 2012

• 한국산업보건학회지
• /
• 제32권2호
• /
• pp.153-162
• /
• 2022

Objectives: Fused deposition modeling (FDM) 3D printer which is one of the material extrusion (MEX) technologies is an additive manufacturing (AM) process. 3D printers have been distributed widely in Korea, particularly in school and office, even at home. Several studies have shown that nanoparticles and volatile organic compounds (VOCs) were emitted from an FDM 3D printing process. The objective of this study was to identify types of chemicals possibly emitted from FDM 3D printing materials such as PLA (polylactic acid), ABS (acrylonitrile butadiene styrene), nylon, PETG (polyethylene terephthalate glycol), PVA (polyvinyl alcohol), PC (polycarbonate) filaments. Methods: 19 FDM 3D printing filaments which have been distributed in Korea were selected and analyzed VOCs emitted of 3D printing materials by headspace gas chromatography mass spectrometry (headspace GC-MS). Subsamples were put into a vial and heated up to 200℃ (500 rpm) during 20 minutes before analyzing FDM 3D printing filaments. Results: In the case of PLA filament, lactide and methyl methacrylate, the monomer components of one, were detected, and the volume ratio ranged 27~93%, 0.5~37% respectively. In the case of ABS filaments, styrene (50.5~59.1%), the monomer components of one, was detected. Several VOCs among acetaldehyde, toluene, ethylbenzene, xylene, etc were detected from each FDM 3D printing filaments. Conclusions: Several VOCs, semi-VOCs were emitted from FDM 3D printing filaments in this study and previous studies. Users were possibly exposed to ones so that we strongly believe that we recommend to install the ventilation system such as a local exhaust ventilation (LEV) when they operate the FDM 3D printers in a workplace.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.1037-1041
• /
• 2001

Competitive power is rapidly manufacture product required consumers. Therefore, modern industry have changed from small item many production to many item small production, rapid production is necessary thing at the product development. Thus, rapid prototyping is appeared. If the graphic model was made by CAD, the production can be made in short term. That provide what the part was directly tested by the worker. It provide believable data. This study is Imfluence of Surface roughness on Rapid prototyping by FDM(Fused deposition modeling).

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.68-74
• /
• 2002

The FD process is analogous to the direct piston extrusion process where the cold feed filament acts as a piston extruding the molten filament from the heated liquefier through a nozzle. The extruded filament is deposited on top of futureless platform, where the liquefier and the nozzle move in X and Y direction control by computer based on the part geometry. After the first layer, the Z platform indexes down and the next layer get deposited on top of the first layer. the layer by layer building process introduces surface problem. This paper describes effect of slice interval of the parts built by fused deposition modelling rapid prototyping system.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권3호
• /
• pp.337-344
• /
• 2016

본 연구에서는 3차원(3-dimensional, 3D) 프린팅 기술로 출력된 팬톰에 대한 X선 투과성을 평가하고자 하였다. 3D 프린팅 방식은 용융적층조형(fused deposition modeling, FDM) 방식을 이용했으며 소재는 아크릴로나이트릴 뷰타다이엔 스타이렌(acrylonitrile butadiene styrene, ABS)을 사용하였다. 팬톰은 원통 모양으로 설계하였으며 전산화단층영상장비(computed tomography, CT)에서 획득한 단면영상으로 균일도를 측정하였다. X선 투과성 평가는 3D 출력된 팬톰 내부에 이온챔버를 삽입하여 실시하였다. 그 결과, 평균 균일도가 2.70 HU이었으며 기존 폴리메틸 메타크릴레이트(poly methyl methacrylate, PMMA) CT 팬톰과 3D 프린터로 출력된 팬톰에서 측정된 X선 투과성의 상관관계는 0.976로 높은 상관관계가 있는 것으로 나타났다. 향후 3D 프린팅 기술을 이용한 방사선정도관리 팬톰 제작에 기초자료로 활용할 수 있으리라 기대한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.591-596
• /
• 2002

Fused deposition(FD) modeling by Stratasys Inc., is one of the material deposition subfamilies of solid freefrom fabrication(SFF) technologies. In this process, build material in the form of a flexible filament, is heated to a semi-liquid state and extruded from a controlled deposition head onto a fixtureless table in a temperature controlled environment. The position of nozzle is computer controlled relative to the base, which allows geometric complex models to be made to precise dimensions. FDM provide what the part was directly tested by the worker. It provide believable data. This Study is identify to surface roughness by build orientation adjustment. So, the paper is the study on surface roughness by build orientation at FDM.