• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.237-237
• /
• 2015

The district of Marlborough has had more than its share of river management projects over the past 150 years, each one uniquely affecting the geomorphology and flood hazard of the Wairau Plains. A major early project was to block the Opawa distributary channel at Conders Bend. The Opawa distributary channel took a third and more of Wairau River floodwaters and was a major increasing threat to Blenheim. The blocking of the Opawa required the Wairau and Lower Wairau rivers to carry greater flood flows more often. Consequently the Lower Wairau River was breaking out of its stopbanks approximately every seven years. The idea of diverting flood waters at Tuamarina by providing a direct diversion to the sea through the beach ridges was conceptualised back around the 1920s however, limits on resources and machinery meant the mission of excavating this diversion didn't become feasible until the 1960s. In 1964 a 10 m wide pilot channel was cut from the sea to Tuamarina with an initial capacity of $700m^3/s$. It was expected that floods would eventually scour this 'Wairau Diversion' to its design channel width of 150 m. This did take many more years than initially thought but after approximately 50 years with a little mechanical assistance the Wairau Diversion reached an adequate capacity. Using the power of the river to erode the channel out to its design width and depth was a brilliant idea that saved many thousands of dollars in construction costs and it is somewhat ironic that it is that very same concept that is now being used to deal with the aggradation problem that the Wairau Diversion has caused. The introduction of the Wairau Diversion did provide some flood relief to the lower reaches of the river but unfortunately as the Diversion channel was eroding and enlarging the Lower Wairau River was aggrading and reducing in capacity due to its inability to pass its sediment load with reduced flood flows. It is estimated that approximately $2,000,000m^3$ of sediment was deposited on the bed of the Lower Wairau River in the time between the Diversion's introduction in 1964 and 2010, raising the Lower Wairau's bed upwards of 1.5m in some locations. A numerical morphological model (MIKE-11 ST) was used to assess a number of options which led to the decision and resource consent to construct an erodible (fuse plug) bank at the head of the Wairau Diversion to divert more frequent scouring-flows ($+400m^3/s$)down the Lower Wairau River. Full control gates were ruled out on the grounds of expense. The initial construction of the erodible bank followed in late 2009 with the bank's level at the fuse location set to overtop and begin washing out at a combined Wairau flow of $1,400m^3/s$ which avoids berm flooding in the Lower Wairau. In the three years since the erodible bank was first constructed the Wairau River has sustained 14 events with recorded flows at Tuamarina above $1,000m^3/s$ and three of events in excess of $2,500m^3/s$. These freshes and floods have resulted in washout and rebuild of the erodible bank eight times with a combined rebuild expenditure of $80,000. Marlborough District Council's Rivers & Drainage Department maintains a regular monitoring program for the bed of the Lower Wairau River, which consists of recurrently surveying a series of standard cross sections and estimating the mean bed level (MBL) at each section as well as an overall MBL change over time. A survey was carried out just prior to the installation of the erodible bank and another survey was carried out earlier this year. The results from this latest survey show for the first time since construction of the Wairau Diversion the Lower Wairau River is enlarging. It is estimated that the entire bed of the Lower Wairau has eroded down by an overall average of 60 mm since the introduction of the erodible bank which equates to a total volume of $260,000m^3$. At a cost of $$0.30/m^3$ this represents excellent value compared to mechanical dredging which would likely be in excess of $$10/m^3$. This confirms that the idea of using the river to enlarge the channel is again working for the Wairau River system and that in time nature's "excavator" will provide a channel capacity that will continue to meet design requirements.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.85-93
• /
• 2016

Convergent education is essential to develop consilient thinking skills, ability to recreate information and knowledge, and problem-solving skills which are demanded in society of convergent knowledge. Accordingly, this study is going to develop a convergent class model of augmented reality and art based on consilient knowledge. Teaching model is designed based on the ADDIE model, which was operated by opening a real class in order to verify the validity. The result showed a high satisfaction of learners showed the ability to adapt to the major areas associated with the cultivation of learners. Characteristics of augmented reality medium were found to enable learners to analyze a new phenomenon and to fuse the necessary knowledge by inducing them to actively interact by the their intention in learning. Therefore, it is possible to cultivate creative and convergent persons of ability equipped with more flexible and creative thinking ability and discernment through deepened education for recognizing and understanding convergent cases between art and scientific technology. There is a study on the validation and the convergence of different subjects in terms of a variety of aspects, left behind of this study.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.1
• /
• pp.23-38
• /
• 2009

Objectives : The purpose of this morphological studies was to investigate the relations between Sanyinjiao(Sp6), Yinlingquan(Sp9) and pancreas of rats using peudorabies virus(PRV). Methods : We observed labeled neurons following the injection of PRV, Bartha strain, into the Sanyinjiao(Sp6), Yinlingquan(Sp9) and pancreas of rats. After survival times of 4 days following the injection of PRV, the rats were perfused, and their spinal ganglia, spinal cord and brain stem were frozen sectioned($35{\mu}m$). These sections were strained by PRV immunohistchemical staining methods and observed with light microscope. Results : The results were as follows. 1. In the spinal ganglia, the overlap areas of PRV labeled neurons projecting to Sanyinjiao(Sp6), Yinlingquan(Sp9) and pancreas were observed in T10-13 dorsal root ganglia. 2. In the spinal cord, the overlap areas of PRV labeled neurons projecting to Sanyinjiao(Sp6), Yinlingquan(Sp9) and pancreas were lamina I, IV, V, VII, IX, X, intermediolateral nucleus(IML), intermediomedial nucleus(IMM) in thoracic segments. In lumbar segments, the overlap areas of PRV labeled neuron were lamina I, IV, V, VI, IX, X and IMM. In sacral segments, the overlap areas of PRV labeled neuron were lamina I, IV, V, VI, VII, IX, X. 3. In the brain, the overlap areas of PRV labeled neurons projecting to Sanyinjiao(Sp6), Yinlingquan(Sp9) and pancreas were area postrema, nucleus tractus solitarius, caudoventrolateral reticular nu., medullary reticular nu., lateral paragigantocellular nu., C3 adrenalin cells, gigantocellular nu., raphe pallidus nu., raphe obscurus nu., ambiguus nu., raphe magnus nu., pontine reticular formation, A5 cell group, subcoeruleus nu., locus coeruleus, Barringnton's nu., $K{\ddot{o}}lliker$-Fuse nu., dorsal raphe nu., Edinger-Westphal nu., central gray matter, perifornical nu., dorsomedial hypothalamic nu., arcuate nu., lateral hypothalamic nu., paraventricular hypothalamic nu., hindlimb area. Conclusions : In conclusion, these results suggest that the interrelationship of meridian(spleen meridian), acupoints(Sp6 and Sp9) and viscera(pancreas) may be related the central autonomic centers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.1-9
• /
• 2020

The manufacturing processes of high-precision parts for PGM (Precision Guided Missiles) have not been improved for decades; they still depend on machining or high-precision casting. These processes have an advantage when making small amounts of high-reliability parts in the usual case of a PGM system. In the case of a PGM system, however, which has been made for striking an extensive area, requires hundreds of bomblet units that require mass productivity. In addition, in the case of a part that is very difficult to machine, mass productivity and quality cannot be satisfied at the same time. In particular, cost reduction is an essential precondition to strengthening the export competitiveness of Korean defense articles. This study examined whether the MIM process is appropriate for manufacturing high-precision parts that require mass productivity. The optimized MIM process condition was determined after carrying out fundamental research. Comparisons of the quality of prototype parts with original parts and a functional test of a fuse that had been made with MIM parts highlighted the application possibility of the MIM process.

• Korean Journal of Plant Resources
• /
• v.30 no.2
• /
• pp.167-175
• /
• 2017

We conducted a total of 28 surveys from March to October 2016 in Gayasan National Park, to identify threatened plants for climate change, as well as for the effective management of biological organisms and resources against climate changes in Korea. Regarding threatened plants for climate change, we identified a total of 39 taxa, with 11 northern, 2 southern, and 26 taxa of concern. Among these taxa, 33 were identified as wild species. The species threatened by climate change located in the subalpine regions of Gayasan National Park were Abies holophylla Maxim., Abies koreana Wilson, Pinus koraiensis Siebold & Zucc., Betula ermanii Cham., Berberis amurensis Rupr., Rhododendron tschonoskii Maxim., Vaccinium hirtum var. koreanum (Nakai) Kitam., Primula modesta var. hannasanensis T.Yamaz., Trientalis europaea var. arctica (Fisch.) Ledeb., Thymus quinquecostatus Celak., Parasenecio firmus (Kom.) Y.L.Chen, and Lilium cernuum Kom. These species are expected to be particularly vulnerable to the effects of global warming, since they were confirmed to have a very narrow vertical distribution range. Moreover, although the following species are not included in the list of plants threatened by climate change, it is assumed that the endemic species that grow at the summit, and Grade V floristics special plants, such as Pedicularis hallaisanensis Hurus., Allium thunbergii var. deltoides (S.O.Yu, S.Lee & W.Lee) H.J.Choi & B.U.Oh, Heloniopsis tubiflora Fuse, N.S.Lee & M.N. Tamura, Aletris glabra Bureau & Franch, and Gymnadenia cucullata (L.) Rich., will also be extremely vulnerable to climate change. Therefore, we believe that measures for the conservation of these species are urgently needed, and also that the definition of species threatened by climate change should be broadened to include more objective and valid taxa through the long-term monitoring of species distributed around the summit area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.400-407
• /
• 2016

The purpose of this study is to propose a useful method of solving the problem of thermal stability in surge protection devices (SPDs). First of all, the existence of the problem in the developed SPDs was confirmed by experiment. After analyzing the problem, a useful method of solving it is proposed and implemented. An experiment is performed to verify the performance of the implemented device. The results of this study are as follows; it is revealed that the problem of the thermal stability results from the varistor, one of the components in the SPD. A varistor with a built-in thermal fuse is applied to the SPD for the purpose of solving the problem. The experimental results confirmed that the thermal stability was improved by replacing the varistor. As a result of this study, the reliability of radar control units is enhanced and the probability of malfunction is reduced.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.26-34
• /
• 2008

The information of traversability and path planning is essential for UGV(Unmanned Ground Vehicle) navigation. Such information can be obtained by analyzing 3D terrain. In this paper, we present the method of 3D terrain modeling with color information from a camera, precise distance information from a 2D Laser Range Finder(LRF) and wheel encoder information from mobile robot with less data. And also we present the method of 3B terrain modeling with the information from GPS/IMU and 2D LRF with less data. To fuse the color information from camera and distance information from 2D LRF, we obtain extrinsic parameters between a camera and LRF using planar pattern. We set up such a fused system on a mobile robot and make an experiment on indoor environment. And we make an experiment on outdoor environment to reconstruction 3D terrain with 2D LRF and GPS/IMU(Inertial Measurement Unit). The obtained 3D terrain model is based on points and requires large amount of data. To reduce the amount of data, we use cubic grid-based model instead of point-based model.

• Journal of Life Science
• /
• v.17 no.9 s.89
• /
• pp.1197-1203
• /
• 2007

A genomic DNA library of the bacterium Paenibacillus sp. DG-22 was constructed and the ${\beta}-xylosi-dase-positive$ clones were identified using the fluorogenic substrate $4-methylumbelliferyl-{\beta}-D-xylopyr-anoside$ $({\beta}MUX)$. A recombinant plasmid was isolated from the clone and 4.3-kb inserted DNA was sequenced. The ${\beta}-xylosidase$ gene (xylA) was comprised of a 2,106 bp open reading frame (ORF) en-coding 701 amino acids with a molecular weight of 78,710 dalton and a pI of 5.0. The deduced amino acid sequence of the xylA gene product had significant similarity with ${\beta}-xylosidases$ classified into family 52 of glycosyl hydrolases. The xylA gene was subcloned into the pQE60 expression vector to fuse with six histidine-tag. The recombinant ${\beta}-xylosidase$ $(XylA-H_6)$ was purified to homogeneity by heat-treatment and immobilized metal affinity chromatography. The pH and temperature optima of the $XylA-H_6$ enzyme were pH 5.5-6.0 and $60^{\circ}C$, respectively.

• Journal of Global Scholars of Marketing Science
• /
• v.8
• /
• pp.61-87
• /
• 2001

Internet, which has been developed as a new exchange revolution, forms a huge virtual exchange market, and the innovative electronic commerce has completely broken off the way of existing goods distribution. This study begins with an awareness of the importance of customer retention to keep winning over the competition in internet shopping mall. In order to explain of the customer retention between individual and internet shopping mall, the study introduces first a satisfaction on shopping followed by an awareness of the importance of customer retention, and looks into a formation process of trust, satisfaction, and relationship orientation occurred by the offer of valuable convenience to customers. The study also explores the influence on shopping value by the characteristics with which internet shopping mall can bear, unfold by a cause and effect relationship the degree of shopping satisfaction, trust, and relationship orientation, and inquires a question to find out how to fuse the characteristics for internet retention. Therefore, this study has the following purposes: After examining prior research for the characteristics of internet shopping mall, it presents a possibility to connect shopping value with customer retention in light of theoretical system on characteristic elements derived from emotional and utilitarian perspectives. In order to achieve the purposes, the characteristics of internet retailing shop included site design, virtual reality, web awareness, customer concern, merchandise search, information supply, product value, and transaction system. Hypotheses were set up for the relationship with these characteristics and substantially analyzed. To prove this research, we analyzed collected data in which customers had experienced in shopping at internet shopping mall and discussed strategic current issues about its analytic results.

• Journal of the Korean Institute of Gas
• /
• v.21 no.5
• /
• pp.83-88
• /
• 2017

The purpose of this paper is to study for a failure examples producing in electronic control air conditioner in vehicle. The first example, it looked for the repetitive fuse cutting phenomenon that the diode using for a surge voltage prevention of inner A/C relay damaged because of no absorbing the surge voltage by short of diode when the A/C is off. The second example, it knew the icing phenomenon of evaporator that the A/C ECU didn't control the A/C because of inner cutting of fin thermo sensor. The third example, it verified the operation trouble phenomenon because of the A/C switch and for sensor burned in flames by short phenom enon when the sheath of the cable has peeled off. Therefore, the driver have to manage the optimism system of a car by thoroughgoing inspection and improvement the failure phenomenon.