• Journal of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.139-148
• /
• 1977

The rate of oxime formation of 2-furfural and 5-substituted-2-furfurals such as 5-methyl-2-furfural, 5-isopropyl-2-furfural, 5-tert-butyl-2-furfural, 5-isoamyl-2-furfural and 5-nitro-2-furfural have been measured at 15∼$45^{\circ}C$ in aqueous solution buffered at pH 7. Oxime formation for all the compounds investigated is second-order reaction and their activation energies observed are 5.50, 7.22, 7.03, 7.49, 7.78 and 4.97 kcal/mole, respectively. Hammett equation is obtained for 5-alkyl-2-furfurals and the reaction constants (${\rho}$) calculated at 15, 25, 35 and $45^{\circ}C$ are 2.010, 1.756, 1.541, and 1.311 respectively.

• Journal of the Korean Chemical Society
• /
• v.16 no.5
• /
• pp.290-297
• /
• 1972

We have obtained the results of Cannizzaro reaction of furfural, 5-methylfurfural and 5-bromofurfural by using alcoholic potassium hydroxide solution in 95% (V/V) methanol solvent at $0{\sim}40^{\circ}C$. The results are as follows: 1) Their Cannizzaro reaction is fourth-order reaction, and the reaction of furfural proceeds 3 times as rapid as that of 5-methylfurfural and 10 times as slow as that of 5-bromofurfural. 2) Their activation energies of furfural, 5-methylfurfural and 5-bromofurfural in the reaction are 10.46Kcal/mole, 16.27Kcal/mole, and 9.62Kcal/mole respectively, and the calculated activation parameters, and ${\Delta}S^{\neq}$, increase in the order of 5-bromofurfural, furfural and 5-methyl-furfural.

• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.10-15
• /
• 2016

In this new energy economy era, the importance of renewable energy resource needs to be highly addressed, as the demand of energy dramatically increases and fossil fuel is being exhausted. Lignocellulosic biomass is considered as the sustainable and renewable feedstock to produce biochemicals and biofuels that are the alternative for petroleum derived products. Furfural is a natural precursor for the range of furan based chemicals and solvents such as methylfuran, tetrahydrofuran, methyltetrahydrofuran, ethyltetrahydrofuryl ether, ethyl levulinate, levulinic acid, and alkanes. Thus, furfural should be a renewable platform chemical for biochemicals and renewable biofuels. In this paper, the concept of biorefinery, furfural production and its applications are briefly reviewed.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2162-2164
• /
• 2014

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.12-12
• /
• 2023

Plant biomass, or lignocellulose, is one of the most abundant natural resources on earth. Lignocellulosic biomass, such as agricultural and forestry residue, serves as a renewable feedstock for microbial cell factories due to its low price and abundant availability. However, the recalcitrance of lignocellulosic biomass requires a pretreatment process prior to microbial fermentation, from which fermentable sugars including xylose and glucose are generated along with various inhibitory compounds. The presence of furan derivatives, such as 5-hydroxymethyl-2-furaldehyde and 2-furaldehyde (furfural), hampers the microbial conversion of lignocellulosic biomass into value-added commodities. In this study, furfural tolerance was improved by investigating the detoxification mechanism in non-model yeast. The genes encoding aldehyde dehydrogenases were overexpressed to enhance furfural tolerance and resulted in improving cell growth and lipid production that can be converted into biofuel. Taken together, this approach contributes to the understanding of the reducing toxicity mechanism of furfural by the aldehyde dehydrogenases and provides a promising strategy that the use of microorganism as an industrial workhorse to treat efficiently lignocellulosic biomass as sustainable plant derivatives.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.166-172
• /
• 2000

The life expectation of power transformers is basically dependent on the aging deterioration of insulating paper which can not be obtained from operating transformers. Therefore, it will be very useful if we can manage transformers by indirect analysis of degradation products. "Furan derivatives" are known the decomposition products which are generated by the degradation of cellulose in insulating paper. We proved that 2-furfural is the only measurable product from our transformers, and determined easily the concentration of 2-furfural by HPLC without any specific pretreatments, Compared to concentration of $CO_2$ and CO by GC, the concentration of 2-furfural by HPLC can estimate more accurately aging characteristics of transformers. We expect that these results can be utilized to predict the aging characteristics and life diagnosis of power transformers.

• Journal of the Korean Chemical Society
• /
• v.52 no.2
• /
• pp.124-132
• /
• 2008

effect of some furfural hydrazone derivatives (I -V) as corrosion inhibitors for C-steel in 3M H3PO4 solution in which M indicates mol/l has been studied using weight-loss and galvanostatic polarization techniques. A significant decrease in the corrosion rate of C-steel was observed in the presence of the investigated compounds. This study revealed that, the inhibition efficiency increases with increasing the inhibitor concentration, and the addition of iodide and thiocynate ions enhances it to a considerable extent. The effect of temperature on the corrosion behavior of C-steel was studied in the range from 30-60oC with and without 510-6 M investigated compounds using weight-loss method. Apparent activation corrosion energy (Ea*) and other thermodynamic parameters for the corrosion process were calculated and discussed. The polarization measurements show that the investigated compounds act as mixed-type inhibitors, but the cathode is more polarized when an external current was applied. The adsorption of these compounds on the surface of C-steel in 3M H3PO4 obeys Frumkins adsorption isotherm. The mechanism of inhibition was discussed in the light of the chemical structure of the investigated compounds.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.1
• /
• pp.90-98
• /
• 2003

In vivo $^31p$ Nuclear Magnetic Resonance ($^31p$NMR) and metabolic studies were carried out on an acetic acid tolerant mutant, Zymomonas mobilis $ZM4/Ac^R$, and compared to those of the parent strain, Z. mobilis ZM4, to evaluate possible mechanisms of acetic acid resistance. This investigation was initiated to determine whether or not the mutant strain might be used as a suitable recombinant host far ethanol production from lignocellulose hydrolysates containing various inhibitory compounds. $ZM4/Ac^R$ showed multiple resistance to other lignocellulosic toxic compounds such as syringaldehyde, furfural, hydroxymethyl furfural, vanillin, and vanillic acid. The mutant strain was resistant to higher concentrations of ethanol or lower pH in the presence of sodium acetate, compared to ZM4 which showed more additive inhibition. in vivo $^31p$ NMR studies revealed that intracellular acidification and de-energization were two mechanisms by which acetic acid exerted its inhibitory effect. For $ZM4/Ac^R$, the internal pH and the energy status were less affected by sodium acetate compared to the parent strain. This resistance to pH change and de-energization caused by acetic acid is a possible explanation for the development of resistance by this strain.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.3
• /
• pp.371-380
• /
• 2023

This study aimed to present data for the industrialization of Omija added onion fermented beverage (OOFB) development by analyzing the volatile flavor components. A total of 55 compounds, including 4 terpene derivatives, 9 esters, 5 aromatic compounds, 6 alcohols, 7 ketones, 3 aldehydes, 11 acids, 1 sulfur-containing compound, 8 furans and 1 other, were identified in OOFB. The content of fragrance components was high with 37.8% of acids and 29.0% of furans. 2,5-dimethyl thiophene, a sulfur compound, is a compound produced during the acetic acid fermentation of onion, and is thought to affect the onion flavor of OOFB.

• YAKHAK HOEJI
• /
• v.18 no.4
• /
• pp.255-258
• /
• 1974

The insecticidal activity of six lately synthesized carbamate derivatives of furfural oxime N-methylcarbamate (I), 5-methyljural oxime N-methylcarbamate (II), methyl p-(methylcarbamoyl) oxybenzoate (IV), ethyl p-(methylcarbamoyl) oxybenzoat(V), n-propyl p-(methyl carbamoyl)oxybenzoate(VI) and n-butyl p-(methyl carbamoyl)oxybenzoate examined using o.2w/v% acetone solutions of each compound. Among them, alkyl p-(methyl carbamoyl) oxybenzontes exerted slightly insecticidal effects on Sogata furcifera H$_{ORVATH}$, Delphacodes stria striatella FALLEN, wherease no significant effects were observed on Mil-aparvata Iugens Stal, Inazuma dorsolis Moischiulsky, and Naphotettix apicalis cincticeps U$_{HLER}$.