• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.694-706
• /
• 2022

This study focusses on the development of a motion-sensing smart leggings prototype with the help of a module that monitors motion using a fiber-type stretch sensor. Additionally, it acquires data on Electrocardiogram (ECG), respiration, and body temperature signals, for the development of smart clothing used in online exercise coaching and customized healthcare systems. The research process was conducted in the following order: 1) Fabrication of a fiber-type elastic strain sensor for motion monitoring, 2) Positioning and attaching the sensor, 3) Pattern development and three-dimensional (3D) design, 4) Prototyping 5) Wearability test, and 6) Expert evaluation. The 3D design method was used to develop an aesthetic design, and for sensing accurate signal acquisition functions, wearability tests, and expert evaluation. As a result, first, the selection or manufacturing of an appropriate sensor for the function is of utmost importance. Second, the selection and attachment method of a location that can maximize the function of the sensor without interfering with any activity should be studied. Third, the signal line selection and connection method should be considered, and fourth, the aesthetic design should be reflected along with functional verification. In addition, the selection of an appropriate material is important, and tests for washability and durability must be made. This study presented a manufacturing method to improve the functionality and design of smart clothing, through the process of developing a prototype of motion-sensing smart leggings.

• 한국의류학회지
• /
• 제45권4호
• /
• pp.598-611
• /
• 2021

The purpose of this study was to investigate the necessary functions and areas of improvement in bras worn by patients during the initial three-month recovery period after a breast augmentation procedure, and a functional bra that fits properly was designed. In order to analyze the necessary functions, a bra was designed after relevant discussions with medical staff and patients who underwent breast augmentation surgeries and considering the advice from bra designers and clothing and textile experts. This bra was designed to protect the surgical scars and minimize the compression by inserting a nonwoven fabric into the shoulder and front parts. In addition, it was designed in a way that could fit the individual breast volume by using a mesh material partially on the upper side of the molded cups. Underwires that could support the breasts were inserted, and a detachable wire was used to suit the patient's needs and the diagnosis by the medical staff. As the bra designed in this study received excellent scores during the evaluation by research subjects and experts, it can be used for designing the prototype of a functional bra.

• International Journal of Human Ecology
• /
• 제9권1호
• /
• pp.41-51
• /
• 2008

A rapidly aging Korean population highlights the importance of investigating the actual state and needs of clothing for the elderly to provide basic information for a future senior industry. This paper surveyed clothing purchasing behaviors. The sample of this survey consisted of 210 females aged 55 over who live in Dajeoun and Nonsan. The data were analyzed by using SPSS. The major findings are as follows. First, most elderly women have bought the ready-made clothes in local markets. Second, the major consideration of clothing purchasing behavior was the possibility of outdoor wearing and color. They were satisfied with ready-made clothes because of the convenience to buy, design, and the necessity of the clothing brands for aged people. Third, they preferred pure cotton or mixed cotton even though they possessed the mixed cotton or synthetic fiber in clothing materials. Respondents preferred the feeling, heat-retaining property, and absorptiveness in textiles. The result indicates the demand for various material applications of functional textiles for elderly women.

• 패션비즈니스
• /
• 제26권4호
• /
• pp.100-111
• /
• 2022

After the corona pandemic, when consumers choose clothes, the issue of sustainability has become a more important selection criterion. The eco-friendly functional fiber used in the study is a smartcell, which has functions such as UV protection, decomposition of harmful substances, deodorization, antibacterial and biodegradation. This eco-friendly functional fiber was dyed using five kinds of natural dyes to examine the color change according to dyeability and dyeing conditions. As natural dyes, gardenia, turmeric, sappan wood, lac, and indigo were used. For comparison with smartcell, rayon, a cellulose regenerated fiber, and wool fiber, a protein fiber, were dyed under the same conditions to compare dyeability and color. The study results are as follows. It was found that smartcell had superior dyeability compared to rayon and wool in gardenia dye and showed lower dyeability than wool when dyeing turmeric, sappan wood, and lac dyes, but showed superior or similar dyeability than rayon. In case of indigo dyeing, the dyeability of smartcell was the best when dyed once, but it was found that smartcell had a lower effect on repeated dyeing compared to wool or rayon. Therefore, smartcell has superior dyeability compared to rayon fiber in gardenia, turmeric, sappan wood, and lac dyeing, and in case of indigo dyeing, it is suitable for light dyeing. When smartcell is produced as textile fashion products, natural dyeing is actively introduced and commercialized, and it is hoped that this study can be a reference material.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.1-6
• /
• 2017

Recently, the brittle materials such as ceramics, glass, sapphire and textile material have been widely used in semiconductors, aerospace and automobile owing to high functional characteristics. On the other hand, it has the characteristics of difficult-to-cut material relative to all materials. In this study, diamond electro-deposited band-saw machine was developed to operate stably using water-coolant type through relative motion between band-saw tool and $Al_2O_3$ material. High densified $Al_2O_3$ material was manufactured by spark plasma sintering method. The bulk density was observed by the Archimedes law and the theoretical density was estimated to be $3.88g/cm^3$ and its hardness 14.7 MPa. From the dicing sawing test of $Al_2O_3$ specimen, behavior of surface roughness and band-saw wear are dominantly affected by the increase of the band-saw linear velocity. Additionally, an continuous pattern type of diamond band-saw was a very effective due to entry impact as a one-off for brittle material.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.425-440
• /
• 2018

Purpose: This study is aimed at developing of the flex resistance testing process at low temperature with the waterproof fabric to suit the military environment, and is designed to fit for the purpose of the waterproof materials in order to optimize the test method by finding out matters to improve from existing the test method and through previous studies. Methods: The test method, which has been applied to flex resistance of existing water-repellent materials, was improved and consequently, differentiated test results could be obtained according to the test temperature, sample size, and flexing method. Results: The testing of the total of 8 samples revealed that performance of the military requirement could hardly be met just by presenting the materials or 2~3 layers when the quality criteria for high functional water repellent fabrics were applied. PTFE(Polytetrafluoroethylene) is preferred to PU(Polyurethane) to be used in the extremely low-temperature environment, but durability under the low-temperature environment may be varied depending on film thickness or laminating technique even if the materials of waterproof films are identical. Therefore, in addition to the material or texture, the test method capable of reflecting durability under the low-temperature environment shall be suggested, and the newly designed test method proposed in this study was shown to suggest differentiated quality criteria by the material. Conclusion: The water resistance measurement and the test method following flex resistance with expanded range of flex will enable the differentiable test of the samples according to the number of repetition. This study is meaningful in that it suggests a differentiable test method capable of establishing a basis of deciding suitable material when selecting military goods made of water repellent material by properly improving the test method.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.583-591
• /
• 2018

This study investigated the current production of women's sportswear tights among a total of 813 yoga, gym and training tights on the market to provide basic data for the development of women's sportswear tight tops. The results found the following: First, according to the analysis of women's sportswear tight tops by brand, polyester, nylon and polyurethane were most used. In addition, elastic, breathable and quick-dry, sweat absorbent products were commonly found. In terms of design, crew neck and sleeveless styles were popular. In addition, mesh was frequently applied to the top of the chest and upper part of the back. The size was mostly marked in S, M and L, and the size range was very large by brand. For color, achromatic color was most common. In terms of price, 'KRW 50,000-100,000' was frequently found. Second, yoga tights were compared to gym & training wear. In the case of yoga tights, elastic, various products in diverse design (e.g., crew neck, sleeveless, long sleeve, etc.) and colors (e.g., red, black, etc.) made of breathable and water-absorbing fabric were most produced. In particular, a combination of mesh materials was common. In gym and training wear, crew neck and short-sleeve styles in achromatic color made of elastic, breathable and quick-dry, seat absorbing fabric were most produced.

• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.337-343
• /
• 2017

The purpose of this study is to investigate the optimal dyeing conditions and human-friendly properties of the extract from the branches of Alnus firma tree which is widely used for forestation and to provide basic information for quantification and commercialization of natural dyeing by discovering such as dye material. The optimal dyeing conditions, as a result, were shown at 100% of dye concentration, $90^{\circ}C$ of dyeing temperature and 40 minutes of dyeing time. In terms of dye uptake depending on the mordanting methods, it showed the best result in order of Fe, Sn, Cu and Al at pre-mordanting while found strong in order of Fe, Cu, Al and Sn at post-mordanting. Color fastness to washing and dry cleaning was found strong at grade 4-5 and fastness to light was rated at 2. The grade of change in color to rubbing and perspiration was good at 4-5. In aspects of functional properties, it showed excellent results of 98% deodorization rate at 120 minutes of dyeing time, 96.1% UV protection rate and 99.9% bacterial reduction against Staphylococcus aureus and Klebsiella pneuminiae. It is considered, therefore, the extract from Alnus firma tree is of great value as an eco-friendly natural dyestuff.

• Macromolecular Research
• /
• 제10권2호
• /
• pp.97-102
• /
• 2002

The mixtures of non-conjugated dienes, 4-methyl-1,4-hexadiene and 5-methyl-1,4-hexadiene (MHD), were successfully synthesized by the reaction of isoprene with ethylene using Fe(III)-based catalyst in toluene. The conversion was over 96 mol% on the basis of the initial amount of isoprene used. The production yield for MHD was nearly 50 mol%, the other was polyisoprene. The mixtures were successfully copolymerized with ethylene by using zirconium-based metallocenes. The products were characterized by the combinations of gas chromatography, high temperature gel permeation chromatography, $^1$H NMR, $^{13}$ C NMR, high temperature $^1$H NMR, UV/visible spectroscopy, and differential scanning calorimetry. It was found that 5-methyl-1,4-hexadiene was active enough to be incorporated into the copolymer chain but the corresponding isomeric material,4-methyl-1,4-hexadiene, was inactive in metallocene-catalyzed copolymerizations. Specifically, in the zirconocene-catalyzed copolymerizations of ethylene with MHD, ansa-structure catalysts seem to be more efficient than non-bridged type zirconocene. The degree of incorporation of MHD in the resulting copolymers was able to be controlled by the amount of non-conjugated dienes used initially.

• 한국의류산업학회지
• /
• 제16권3호
• /
• pp.421-433
• /
• 2014

The aim of this study was to provide compression wear manufacture brands with information needed for product development. 8 tops and 7 bottoms from widely recognized compression wear manufacture brands were selected, and their product structural elements were analyzed, too. The results showed that most compression wear designs were applications of cutting lines designed considering muscle movements of the human body. The average number of cutting lines for patterns and designs were 14 for tops and 15 for bottoms. Different colored material was mainly used on the top for areas that require ventilation or high movement during sports for tops, and for areas that require muscle and joint support during sports for bottoms. The functionality of top materials were found to be stretch, muscle support, moisture absorption and high speed drying, warmth and ventilation for tops, in order of frequency, and stretch, muscle support, moisture absorption and high speed drying, and pressure for bottoms, in order of frequency. Tops were cut in the direction of the lengthwise grain, and bottoms were not only cut in the direction of the lengthwise grain, but also in the direction of the crosswise grain and bias for many products. Tops consisted of an average of 13 organically connected panels, and bottoms consisted of an average of 18 organically connected panels, which was analyzed to improve functionality. The average clothing surface area stretch rate was 85.7% for tops and 70.0% for bottoms, indicating that bottoms were designed to have higher strain rates compared to tops.