• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.997-1005
• /
• 2008

The purpose of this study was to provide the available date to improve the uniform e of the woman employee of the department more aesthetical and functional on the base of the former studies on their situation of uniform wearing. The process of the study was to compare and evaluate the studied uniforms made of elastic material with the one two times after pattern amendment. The nine subjects composed of threes of 20s, 30s and 40s of age and the evaluators were 5 clothing experts. The 5 scored scale of sensory evaluation method was used to evaluate the appearance and the moving function. The data were analysed with mean and t-test. The results were as flowers: 1.The material of blouse was changed with Poly-span to improve the appearance and the moving function. 2.The new uniform got far more good evaluations in the appearance and the moving function showing the significant difference in p<.001 level. 3.The improved uniform blouse pattern was presented fig2 and fig3.

• 한국염색가공학회지
• /
• 제34권2호
• /
• pp.102-108
• /
• 2022

The physicochemical properties of stainless steel fibers which were modified by oxygen plasma treatment were analyzed through microscopy and XPS analysis. The wettability of the surface of the stainless steel fiber was observed by measuring water contact angle to find out the effect of the plasma treatment time on the surface characteristics of the stainless steel fiber. In addition, in order to understand the effect of oxygen plasma treatment on the deterioration of the stainless steel fiber properties, the physical properties due to plasma treatment was investigated by measuring the weight reduction, tensile strength, elongation, tensile modulus of the stainless steel fibers according to the treatment time. As a result, the stainless steel fiber surface was etched by the oxygen plasma and the surface became more wettable by the introduction of hydrophilic functional groups. However the physical properties of the stainless steel fiber were not significantly deteriorated even if the surface of the stainless steel fiber made hydrophilic.

• 감성과학
• /
• 제13권3호
• /
• pp.467-474
• /
• 2010

최근 생체 신호 측정을 위한 기능성 의류는 동작 잡음에 의한 노이즈를 최대한 줄여 정확한 생체 신호를 측정 가능케 하는 것의 중요성에 대한 논의가 이루어지고 있다. 이에 본 연구는 영향 요인별 고려 사항을 반 영하여 3-리드(lead)방식의 은사 자수의 직물 전극을 개발하고, '일자형 절개 타입', '십자형절개 타입', '엑스형 절개 타입', '곡선 엑스형 절개 타입'의 총 네 가지 타입의 생체신호 센싱 스마트 의류의 시안을 설계하고 제작하였다. 디자인 시안은 민소매형태의 남성용 티셔츠로 신축성 있는 소재를 사용하여 인체 굴곡을 따라 의복과 전극이 밀착될 수 있도록 하였으며, 트랜스미터를 이용하여 메인 컴퓨터로 데이터가 무선 전송되게 하였다. 각 재모듈화형 의류 타입별 인체 동작에 의한 영향과 정지 및 동작 상태에서의 심전도 센싱 성능을 평가하기 위해 동작에 따른 전극의 변위를 측정하고, 심전도 측정 평가를 실시하여 SNR을 분석하였다. 본 실험 결과를 반영하여 의류 디자인 시안의 수정 및 보완 과정을 거친 후, 최종적으로 '연속-부착형', '삽입-분리형'의 두 가지 타입의 생체신호 센싱 스마트의류 디자인 모형의 모듈화 방안을 제시하였다.

• 한국의상디자인학회지
• /
• 제24권4호
• /
• pp.101-116
• /
• 2022

The purpose of this study is to understand the trends of fashion mask designs as a fashion item with characteristics to protect individual health and safety from harmful environments. To this end, the concept, the trend analysis of the domestic and foreign mask markets, the type, characteristics of functional masks, and the design trend of fashion masks were analyzed. Research methods included case studies and literaturte on mask design, fashion magazines, fashion brand websites, fashion collections, and promotional material. First, masks for personal safety were classified as protective function masks from the natural environment, functional masks by industrial groups, masks for protective functions from biohazards, and masks for protective functions from various external activities. Through this analysis, the design trends of fashion masks were analyzed. The functional orientation of structure and functionality, the environmental orientation of sustainable eco-friendly methods, the fashion orientation of individual fashion styling, and the social functional orientation tend to transmit social messages. In the harmful environment of everyday life, items such as fashion masks with functionality and fashion characteristics should be continuously studied to integrate functional and design characteristics that can contribute to the future fashion industry and the fashion market as a sense of unity and responsibility.

• 한국의류산업학회지
• /
• 제18권4호
• /
• pp.498-508
• /
• 2016

The purpose of this study is to develop an aesthetic and functional bicycle wear for new senior women in their 50s and 60s. Based on the results of the survey, we developed bicycle wear that is friendly to bicycling posture and reflects the preference of new senior women. The results are as followed: First, emphasis is placed on the simple and functional design of the experimental wear consisting of jacket and pants. Jacket is different from the color scheme with the armhole princess line in order for the waistline to look slim. Pants are designed to hold the leg muscles tightly in order to help reduce the muscle fatigue on the bicycle ride. Second, cutting lines and coloring materials are used for the wearer to look slim and the safety of the wearer is planned to secure by inserting the reflective material along the cutting lines on the bicycle ride. Third, the pattern of the experimental wear is designed in consideration of the riding motion of the bicycle. Jacket is designed to have back length longer than front length as compared to the bicycle wears available on the market. Sewing lines in the armpit are designed to be eliminated in order to move the arms smoothly on the ride. Pants are designed to minimize the seam line in consideration of the movement of muscles and ligaments and the experimental wear is produced by combining the material with the functions of cool comfort and stretch.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.1-9
• /
• 2009

A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700$\sim$1,400d (width;1.5$\sim$3mm, thickness;0.01$\sim$0.5mm). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.

• 한국의류산업학회지
• /
• 제22권6호
• /
• pp.752-761
• /
• 2020

This study analyzes the type of preferred shopping items based on tourism shopping value pursued by tourists through shopping at travel destinations as well as verifies their impact on satisfaction. A survey on 310 adult men and women aged 20 to 69 collected data samples representing tourism shoppers in Korea. Based on the collected data, a factor analysis and a structural model equation analysis were performed using SPSS 25.0 and AMOS. Tourism shopping value was divided into functional value, emotional value, exploratory value, and shared value. In addition, shopping items were categorized as physical materials and experience materials to identify the difference in preferred item types according to the value that tourists perceive. It also confirmed the adjustment effect of tourism motivation that affects tourism shopping behavior. According to the analysis results, the more tourists perceive functional and emotional values when shopping, the more physical material they prefer, and the more they perceive exploratory values, the higher the preference for experience goods. However, the shared value affected both physical materials and experience materials. Based on escape-seeking motivation, the adjustment effect of tourism motivation (a major variable to understand the behavior of tourists) on tourism shopping behavior was confirmed. Based on the academic and practical implications of this study, we hope to broaden our understanding of tourism shopping and revitalize research on tourism shopping.

• 한국의류산업학회지
• /
• 제24권6호
• /
• pp.744-755
• /
• 2022

This study sought to verify the shopping values that tourists pursue by purchasing at travel destinations based on tourists' motivation and identify the effects of these values on the types of fashion items preferred by tourists. Furthermore, this study verified the tourist shopping behavior of three Asian countries-Korea, China, and Japan-from a cross-cultural perspective. To obtain a sample that represents tourist shoppers in each country, a survey was conducted on adult men and women in their 20s to 60s, and 986 subjects were collected: 300 Koreans, 385 Chinese, and 301 Japanese. Factor analysis, structural equation modeling, and multigroup SEM were performed on the collected data using SPSS Statistics and AMOS. Based on escaping-seeking theory, tourist intentions were divided into escaping and seeking motivations, and tourist shopping values were divided into functional, emotional, and social. The shopping items were divided into materials and experiential goods to understand the difference between the types preferred by tourists according to the perceived value. In addition, differences in tourist shopping behaviors according to the three nationalities were identified. The findings illustrate that the escaping motive affects emotional and social values, whereas the seeking motive affects all three. Moreover, it was confirmed that functional and emotional values affect preference for material and experiential goods, but social value only affects preference for material goods. For the cross-cultural study, differences in tourist shopping behavior according to nationality were identified.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제10권2호
• /
• pp.174-188
• /
• 2004

제품의 품질 및 가격뿐만 아니라 물질적 풍요로움과 더불어 다변화 되어가는 생활 환경 속에서 소비자의 감성과 선호도를 파악하는 것은 제품 판매 전략의 중요한 성공요소가 되고 있다. 이를 위하여 제품의 기능적 측면뿐만 아니라 개개인의 정서적 감정과 선호도가 반영된 제품의 설계나 디자인 또한 요구되고 있다. 본 연구에서는 사용자의 감성과 선호도를 중심으로 소재를 개발하는 방법의 하나로 협력적 필터링 개인화 기법을 응용하여 패션 디자인 추천 에이전트 시스템(FDRAS-pro)을 제안한다. 텍스타일 기반의 협력적 필터링 기술에서, 예측에 사용될 이웃의 수를 결정하기 위해서 Representative Attribute-Neighborhood 방법을 사용한다. 사용자들간의 유사도 가중치를 계산하기 위해서 피어슨 상관계수(Pearson Correlation Coefficient)를 사용한다. 소재에 대한 사용자의 감성이나 선호도에 대한 텍스타일의 대표 감성 어휘를 추출함으로써 소재 개발을 위한 감성 어휘 데이타베이스를 구축한다. FDRAS-pro는 구축된 감성 어휘 데이타베이스를 기반으로 성향이 비슷한 사용자에게 텍스타일 디자인을 추천한다. 디자인 요소에 따른 감성 분석을 하기 위해서, 텍스타일 디자인을 9가지 디자인 요소(디자인 소재, 모티브대 배경비율, 모티브의 변화도, 해석법, 모티브의 배열, 모티브의 명료성, 명도차, 색상차, 채도차)에 따라 분석하였다. 패션 디자인 추천 시스템으로 개발하여 시스템의 논리적 타당성과 유효성을 검증하기 위해 실험적인 적용을 시도하고자 한다.

• 한국염색가공학회지
• /
• 제28권1호
• /
• pp.14-22
• /
• 2016

The objective of this study is to develop eco-friendly, functional towel material utilizing cotton-Modal-chitosan blended(C-M-CH) yarn and natural dyeing with mugwort colorants. Dyeing properties of towels with mugwort colorants were studied by investigating the effect of dyeing conditions including concentration of mugwort colorants, dyeing temperature, and dyeing time, and the effects of mordants on dye uptakes were investigated. The C-M-CH towel showed better dye uptake than 100% cotton towel with mugwort colorants. The shade of towels got darker and red-yellowish tint increased by mordanting. Comparing with 100% cotton towel, the colorfastness of dyed C-M-CH towel was satisfactory showing above 3 grade which is the lowest grade to washing fastness. The antibacterial activity against Staphylococcus aureus and deodorization performance of towels were excellent and improved by dyeing with mugwort colorants. From the results obtained, it is concluded that the cotton-Modal-chitosan blended towel dyed with mugwort colorants can be used practically for an eco-friendly and multi-functional towel materials with excellent absorbance and drying properties.