• KSBB Journal
• /
• v.20 no.4
• /
• pp.260-265
• /
• 2005

In this work, molecular imprinted polymers (MIPs) using the template of the N-CBZ (carbobenzyloxy)-L-phenylalanine, MAA and 4-VPY as a monomer, EGDMA as a crosslinker and AIBN as an initiator were considered. The prepared polymer particles $(Ca.\;25-35\;{\mu}m)$ were packed into a chromatographic column $(3.9\;\times\;150\;mm)$. The chromatographic characteristics of the retention on the MIP were experimented with acetonitrile as a mobile phase at the flow rate of mobile phase, 0.5 ml/min. The retention factors and resolutions of chiral racemate of the N-CBZ-D, L-phenylalanine were measured. The results showed that the retention factor and resolution by the two co-monomer imprinting polymer were higher than the single monomer imprinting polymers, which indicated an increase in the affinity of the MIP with the sample as a result of the cooperation effect of the binding sites.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.84-90
• /
• 2000

Biodegradation of vanous medium-chain-length polyhydroxyalkanoates (MCL-PHAs) by an extracellular depolymerase system from Pseudomonas sp. RY-1 was investigated under laboratoly conditions. The degradation rate of the polymers was determined by quantitative clem zone technique, enzyme (turbidity) assay, and respirometry assay. Although the enzyme system secreted by Pscudomor~as sp. RY-1 was capable of degrading all MCL-PHAs tested. its secretion was influenced by the availability of secondary carbon sources. The rate of enzymatic degradation of MCL-PHAs was dependent upou the monomeric composition of the polyesters and reduced as the chain lengths of the monomer m t s in the polyesters increased. MCL-PHAs containing C-even monomer units showed faster degradation rate than MCL-PHAs containing C-odd monomer units. Respiration rates of MCL-PHAs with C-even monomer uuts were also much faster than those of MCL-PHAs with C-odd monomer units. The degmdation rate of MCL-PHAs bearing unsaturated substituents was faster than that of mcl-PHAs without functional substituents, which is suggesting the correlation between the degradation rate and the crystallinity of MCL-PHAs.

• Macromolecular Research
• /
• v.11 no.3
• /
• pp.189-193
• /
• 2003

pH- and temperature-sensitive bifunctional hydrogels composed of N-isopropylacrylamide (NiPAAm) and a sulfadimethoxine monomer (SDM) derived from sulfadimethoxine were prepared. These hydrogels exhibit simultaneous pH- and temperature-induced volume-phase transitions. The pH-induced volume-phase transition behavior is produced by the ionization/deionization of SDM and is very sharp. In the high pH region, the ionization of SDM induces swelling of the hydrogels. In the low pH region, the deionization of SDM induces deswelling of the hydrogels. The temperature-induced volume-phase transition behavior of the bifunctional hydrogels exhibits negative thermosensitivity because of the NiPAAm component. The hydrogels swell even at low pH as the temperature decreases. The hydrogels swell at low temperature and high pH, and deswell at high temperature and low pH. The volume of the hydrogels dependl on the balance of the swelling and deswelling produced by the two competing stimuli, pH and temperature.

• Elastomers and Composites
• /
• v.11 no.1
• /
• pp.54-62
• /
• 1976

It has been studied the graft copolymerization of glycidyl-methacrylate monomer containing two functional groups (vinyl- & epoxyl-) to chloroprene rubber. The reaction occured in the manner of chain transfer mechanism was carried out by means of solution polymerization in toluene in the presence of benzoyl peroxide as the radical initiator. The graft copolymer obtained from this work was analyzed by using IR spectrum, and the physical properties of the polymer such as the thermal behavior were also studied according to TG-DTA methods, and the potency of adhesiveness for the purpose of commercial application was investigated. Experimental results for the graft copolymerization are summarized as follows. 1) A small amount of initiator (0.5%) and 50% of monomer showed the best result for the grafting of monomer to the polymer chain of rubber while the 15% of rubber solution was found to be most suitable to raise either for the grafting ratio or the polymerization ratio. 2) Optimum temperature for better yield of graft copolymer was proved to he at $75^{\circ}C\sim80^{\circ}C$ while those of reaction time was to be $1\sim2$ hours.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.493-500
• /
• 2004

We have developed a novel method for patterning functional images in thin polymer films. The key materials we utilized for the imaging were dihydroxyanthraquinones protected with acid-labile tert-butoxycarbonyl (t-Boc) blocking groups. Among the tested compounds, 1,4-dihydroxyanthraquinone (quinizarin; 1) underwent the most drastic change in terms of its color and fluorescence upon protection. We prepared the t-Boc-protected quinizarin and polymers bearing the protected quinizarins as pendent groups. To investigate the possibility of a single-component imaging system, we synthesized a styrenic monomer 14 incorporating protected quinizarin and a maleimide derivative 15 bearing a photoacid generating group and subjected them to polymerization. Selective removal of the protecting groups of the quinizarin moieties in the exposed area using photolithographic techniques allowed regeneration of quinizarin and patterned fluorescence images in the polymer films.

• Journal of Adhesion and Interface
• /
• v.11 no.2
• /
• pp.50-56
• /
• 2010

Polyethyleneterephthalate (PET) film is widely used in various industrial fields such as mobile phone, display pannel, notebook etc. Recently PET film attached on indium tin oxide (ITO) surface has a role of high pencil hardness, high refractive index etc. So we synthesized two types of multi-functional monomer which are epoxy modifed acrylate and unmodified acrylate type using recyclable resource like phloroglucinol, derived from trinitrotoluene. We studied the effect of multi-functional monomer's chemical structure on the various properties such as refractive index, optical transmittance, and pencil hardness. We characterized synthesized multi-functional monomer by qualitative analysis through H NMR. We observed that pencil hardness of 1,3,5-triepoxide benzene and 1,3,5-triacrylate benzene they have the range of 2~3 H at high UV dosage of 300 mW. Refractive index appeared the value of 1.54~1.57. Transmittance of all multi-functional monomers has more than 93%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.87-92
• /
• 2002

At present, the polymer-modified mortars are used as high-performance as well as multi-functional materials in the construction industry. The purpose of this study is to synthesize polymer to modify in cement mortars and make test samples to understand pore size distribution. This paper deals with the effect of monomer ratio on the typical properties of polymer-modified mortars using Methylmethacrylate-Butyl Acrylate(MMA/BA) latexes synthesized through emulsion polymerization. From the results, we knew that the pore volume of polymer-modified mortars using Methylmethacrylate-Butyl Acrylate latexes at bound MMA contents of 70 and 60 percent is 7.5-75cm$^3$/g and the fine pore volume is increased with an increase in the polymer-cement ratio. The total pore volume of polymer-modified mortars using MMA/BA latexes is linearly reduced with an increase in the bound MMA content and increased in the polymer-cement ratio.

• Journal of Environmental Science International
• /
• v.13 no.3
• /
• pp.319-325
• /
• 2004

An experimental study on the preparation of monolithic porous polymers by environmentally friend process in supercritical carbon dioxide has been carried out. Polymerization mixture composed of a cross-linking monomer, initiator and functional co-polymer was charged in the reactor with sapphire window. After the system was purged with a flow of $CO_2$ for 15 min, the reactor was pressurized with liquid $CO_2$ up to 100 bars. The reactor was isolated from and placed back to the system via quick connector for shaking until the mixture had become fully homogeneous. The reactor was then heated and pressurized to the required reaction conditions and left overnight. After cooling and $CO_2$ evacuation, the polymer was removed from the reactor as dry, white, continuous monoliths. The effect of experimental conditions on the physical properties of porous polymer was systematically examined, and it was found that monomer content had a major effect on the physical properties of the polymers.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.174-174
• /
• 2006

By condensing two different functional monomers, highly fluorescent aromatic polymers were prepared to produce a conjugated- conjugated spacer-type copolymer or conjugated-non-conjugated spacer-type copolymer. As synthesized polymers were soluble in an organic solvent and showed significantly enhanced optical properties compared to its monomer. Variation in the monomer composition afforded polymers having multifunctionaility such as photochromic-fluorescent polymers. Transparent thin films of the polymer as a solid medium were prepared using spin coating method and fabricated as a photoswitch, which showed photo-induced conductivity switching properties depending on the core monomeric unit in the polymers.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.2
• /
• pp.292-294
• /
• 1993

Three derivatives of poly(ethylenimine) (PEI) are prepared by Ni(II)-template condensation with glyoxal(GO): PEI[Ni(II)-GO]$_{0.08}$ (1), PEI[Ni(II)-GO]$_{0.03}$ (2), and lau$_{0.18}$PEI[Ni(II)-GO]$_{0.03}$ (3). The contents of Ni(II)-macrocyclic center of 1-3 are 8%, 3%, or 3%, respectively, of the monomer residues, and 18% of monomer residues for 3 are laurylated. The pH profiles for k$_{cal}$ and k$_m$ for the deacylation of 4-carboxy-2-nitrophenyl acetate are measured. The relative magnitude of the parameters for 1-3 and different shapes of the pH profiles for 1-3 are explained in terms of the electrostatic and the hydrophobic effects exerted by the metal centers and lauryl groups. For the artificial metalloenzymes built on PEI, therefore, the ionization of functional groups and the affinity toward counter-anions can be controlled by adjusting charge density and the content of hydrophobic groups.