• KSBB Journal
• /
• 제20권4호
• /
• pp.260-265
• /
• 2005

N-CBZ-L-phenylalanine를 주형분자로 하고 MAA와 4-VPY를 기능성 단량체로 하여 분자각인 고분자를 합성하였다. N-CBZ-L-phenylalanine와 MAA, 4-VPY는 수소결합의 영향을 많이 받고 있으며 이온결합과 소수성결합도 작용하고 있다. 혼합성분을 기능성 단량체로 사용함으로 하여 단량체의 성분들 사이에서 상호작용 효과를 나타냈다. 실험결과에 의하면 혼합 성분인 MAA와 4-VPY를 기능성 단량체로 한 분자각인 고분자에서의 체류인자가 단일성분인 MAA를 사용한 고분자에서의 체류인자보다 컸고 컬럼 효율은 낮았지만 분리도는 높았다. 산성인 MAA와 염기성인 4-VPY를 함께 사용함으로써 거울상 이성질체인 N-CBZ-L-phenylalanine과 N-CBZ-D- phenylalanine의 분리도를 증가시킬 수 있었다. 혼합된 성분의 기능성 단량체로하여 제조된 분자각인 고분자를 키랄 물질의 분리를 비롯한 천연물질의 분리에 더 광범위하게 사용될 수 있을 것이다.

• 미생물학회지
• /
• 제36권2호
• /
• pp.84-90
• /
• 2000

Psudomonas sp. RY-1이 생성하는 extracellular depolymerase system을 이용하여 단위체의 결가지에 서로 다른 탄소 길이와 불포와기를 함유하는 medium-chain-length polyhdroxyalkanoates (MCL-PHAs)의 생분해도를 시럼실 조건에서 조사하였다. 생분애도는 평파내지에서의 clear zone 형성, 효소 처리에 의한 고분자 현탁액의 탁도 감소 및 호흡량의 경시적 변화로 측정하였다. Pseudomonas sp. RY-1은 MCL-PHA depolymerase의 생성을 통하여 조사된 모든 종류의 MCl-PHAs를 분해할 수 있었으나, 이 효소의 생성은 쉽게 이용될수 있는 이차기질에 의해 저해받는 것으로 나타났다. MCl-PHAs의 분해율이 단위체의 탄소수가 홀수개로 구성된 고분자에 비하여 보다 높았다. 곁가지에 분포화기를 함유한 MCl-PHAs는 불포화기를 갖지 아니하는 고분자에 비하여 분해가 빠르게 이루어졌으며, 이들의 분해는 고분자의 결정화도와 밀접한 관련이 있는 것으로 나타났다.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.189-193
• /
• 2003

pH- and temperature-sensitive bifunctional hydrogels composed of N-isopropylacrylamide (NiPAAm) and a sulfadimethoxine monomer (SDM) derived from sulfadimethoxine were prepared. These hydrogels exhibit simultaneous pH- and temperature-induced volume-phase transitions. The pH-induced volume-phase transition behavior is produced by the ionization/deionization of SDM and is very sharp. In the high pH region, the ionization of SDM induces swelling of the hydrogels. In the low pH region, the deionization of SDM induces deswelling of the hydrogels. The temperature-induced volume-phase transition behavior of the bifunctional hydrogels exhibits negative thermosensitivity because of the NiPAAm component. The hydrogels swell even at low pH as the temperature decreases. The hydrogels swell at low temperature and high pH, and deswell at high temperature and low pH. The volume of the hydrogels dependl on the balance of the swelling and deswelling produced by the two competing stimuli, pH and temperature.

• Elastomers and Composites
• /
• 제11권1호
• /
• pp.54-62
• /
• 1976

It has been studied the graft copolymerization of glycidyl-methacrylate monomer containing two functional groups (vinyl- & epoxyl-) to chloroprene rubber. The reaction occured in the manner of chain transfer mechanism was carried out by means of solution polymerization in toluene in the presence of benzoyl peroxide as the radical initiator. The graft copolymer obtained from this work was analyzed by using IR spectrum, and the physical properties of the polymer such as the thermal behavior were also studied according to TG-DTA methods, and the potency of adhesiveness for the purpose of commercial application was investigated. Experimental results for the graft copolymerization are summarized as follows. 1) A small amount of initiator (0.5%) and 50% of monomer showed the best result for the grafting of monomer to the polymer chain of rubber while the 15% of rubber solution was found to be most suitable to raise either for the grafting ratio or the polymerization ratio. 2) Optimum temperature for better yield of graft copolymer was proved to he at $75^{\circ}C\sim80^{\circ}C$ while those of reaction time was to be $1\sim2$ hours.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.493-500
• /
• 2004

We have developed a novel method for patterning functional images in thin polymer films. The key materials we utilized for the imaging were dihydroxyanthraquinones protected with acid-labile tert-butoxycarbonyl (t-Boc) blocking groups. Among the tested compounds, 1,4-dihydroxyanthraquinone (quinizarin; 1) underwent the most drastic change in terms of its color and fluorescence upon protection. We prepared the t-Boc-protected quinizarin and polymers bearing the protected quinizarins as pendent groups. To investigate the possibility of a single-component imaging system, we synthesized a styrenic monomer 14 incorporating protected quinizarin and a maleimide derivative 15 bearing a photoacid generating group and subjected them to polymerization. Selective removal of the protecting groups of the quinizarin moieties in the exposed area using photolithographic techniques allowed regeneration of quinizarin and patterned fluorescence images in the polymer films.

• 접착 및 계면
• /
• 제11권2호
• /
• pp.50-56
• /
• 2010

PET 필름은 핸드폰이나 디스플레이 패널, 노트북 등과 같은 산업전반에 걸쳐 널리 사용 된다. 최근 PET 필름 표면에 부착되는 ITO 표면은 높은 연필 경도와 높은 굴절도 등을 필요로 하기에 본 연구에서는 터치패널용 소자에 쓰이는 PET 필름의 코팅소재로 사용하기 위한 코팅소재를 개발하기 위하여 폐 TNT로부터 추출한 플로로글루시놀(phloroglucinol)을 이용하여 아크릴과 에폭시 형태의 다관능성 모노머를 합성하였다. 다관능성 모노머는 $^1H$ NMR과 FT-IR을 이용하여 구조확인을 하였으며, 다관능성 모노머의 화학구조에 따른 광굴절도, 광투과도, 그리고 표면 경도를 평가하였다. 합성된 다관능성 모노머는 연필 경도 1~3 H의 높은 특성을 나타내었으며, 광굴절도는 1.54~1.57, 광투과도는 93% 이상을 나타내었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.87-92
• /
• 2002

At present, the polymer-modified mortars are used as high-performance as well as multi-functional materials in the construction industry. The purpose of this study is to synthesize polymer to modify in cement mortars and make test samples to understand pore size distribution. This paper deals with the effect of monomer ratio on the typical properties of polymer-modified mortars using Methylmethacrylate-Butyl Acrylate(MMA/BA) latexes synthesized through emulsion polymerization. From the results, we knew that the pore volume of polymer-modified mortars using Methylmethacrylate-Butyl Acrylate latexes at bound MMA contents of 70 and 60 percent is 7.5-75cm$^3$/g and the fine pore volume is increased with an increase in the polymer-cement ratio. The total pore volume of polymer-modified mortars using MMA/BA latexes is linearly reduced with an increase in the bound MMA content and increased in the polymer-cement ratio.

• 한국환경과학회지
• /
• 제13권3호
• /
• pp.319-325
• /
• 2004

An experimental study on the preparation of monolithic porous polymers by environmentally friend process in supercritical carbon dioxide has been carried out. Polymerization mixture composed of a cross-linking monomer, initiator and functional co-polymer was charged in the reactor with sapphire window. After the system was purged with a flow of $CO_2$ for 15 min, the reactor was pressurized with liquid $CO_2$ up to 100 bars. The reactor was isolated from and placed back to the system via quick connector for shaking until the mixture had become fully homogeneous. The reactor was then heated and pressurized to the required reaction conditions and left overnight. After cooling and $CO_2$ evacuation, the polymer was removed from the reactor as dry, white, continuous monoliths. The effect of experimental conditions on the physical properties of porous polymer was systematically examined, and it was found that monomer content had a major effect on the physical properties of the polymers.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.174-174
• /
• 2006

By condensing two different functional monomers, highly fluorescent aromatic polymers were prepared to produce a conjugated- conjugated spacer-type copolymer or conjugated-non-conjugated spacer-type copolymer. As synthesized polymers were soluble in an organic solvent and showed significantly enhanced optical properties compared to its monomer. Variation in the monomer composition afforded polymers having multifunctionaility such as photochromic-fluorescent polymers. Transparent thin films of the polymer as a solid medium were prepared using spin coating method and fabricated as a photoswitch, which showed photo-induced conductivity switching properties depending on the core monomeric unit in the polymers.

• Bulletin of the Korean Chemical Society
• /
• 제14권2호
• /
• pp.292-294
• /
• 1993

Three derivatives of poly(ethylenimine) (PEI) are prepared by Ni(II)-template condensation with glyoxal(GO): PEI[Ni(II)-GO]$_{0.08}$ (1), PEI[Ni(II)-GO]$_{0.03}$ (2), and lau$_{0.18}$PEI[Ni(II)-GO]$_{0.03}$ (3). The contents of Ni(II)-macrocyclic center of 1-3 are 8%, 3%, or 3%, respectively, of the monomer residues, and 18% of monomer residues for 3 are laurylated. The pH profiles for k$_{cal}$ and k$_m$ for the deacylation of 4-carboxy-2-nitrophenyl acetate are measured. The relative magnitude of the parameters for 1-3 and different shapes of the pH profiles for 1-3 are explained in terms of the electrostatic and the hydrophobic effects exerted by the metal centers and lauryl groups. For the artificial metalloenzymes built on PEI, therefore, the ionization of functional groups and the affinity toward counter-anions can be controlled by adjusting charge density and the content of hydrophobic groups.