• Textile Coloration and Finishing
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2011

Research information related to application of enzyme as pretreatment and subsequent functional finishing on wool blended textiles for imparting multi-functional properties is still scanty. Yarn-blended wool/cotton fabric was pretreated with both a cellulase (Bactosol-CA) or a protease (Savinase-16.0LEx) in individual, subsequently finished with Synthappret-BAP and ${\beta}$-cyclodextrin based combination to impart anti-shrink, anti-microbial, softening and anti-crease properties. The performance of the finished fabrics depended on type of finishing combinations applied rather than enzyme pretreatment. Savinase pretreatment followed by Synthappret+Ceraperm-MW combination finishing impart both anti-shrink property as well as softening, while Bactosol pretreatment followed by ${\beta}$-cyclodextrin and sanitize combination finishing impart antimicrobial activity as well as anti-shrink finish to the wool/cotton blend fabric.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.389-394
• /
• 2019

In this study, a functional inorganic insulation as TiO₂ and inorganic wet fly ash were used to evaluate the physical performance and thermal environment of an exterior finish that can improve the thermal environment of a building. The performance evaluation of the finish was based on the KS F 4715 thin coating material and the thermal environment. When TiO₂ was added, the physical performance was lowered at 10% or more, and the inorganic wet-treated fly ash increased the physical performance by 10%. In the thermal environmental evaluation, the surface temperature reduction effect of the inorganic wet-treated fly ash was low, but when used in combination with TiO₂, it was effective to reduce the surface temperature and the internal temperature. As a result, the optimum combination of TiO₂ and inorganic wet-treated fly ash for thermal environment control was found to be optimal when 5% of each mixture was used.

• Journal of Mechanical Science and Technology
• /
• v.14 no.1
• /
• pp.72-83
• /
• 2000

In recent years considerable progress has been made in the characterisation of surface finish in three dimensions, and in the development of protocols which can be used for international standardisation. Although the subject as it has currently developed has much further to go if the process of surface characterisation is to impact on manufacture, control and specification of the manufacturing process itself. Researchers in this important area are beginning to realise that if the subject is to have great impact on manufacturing industries, surface characterisation must be broadened to include measures of surface integrity of the component and in addition be related to the functional demands imposed on the surface. The functional demands being a requirement of the engineering situation in which the components are employed. If these three factors are considered simultaneously, surface characterisation, surface integrity and component function, then a new and important subject is born, the subject of the Engineered Surface. Part 1 of this paper attempts to draw together the elements which go together to create the subject, 'The Engineered Surface'. The paper presents a method by which this important subject can be developed to the benefit of manufacturing industries. The paper also discusses the importance of a co-ordinated approach to the subject and the way that information can be documented to eventually provide a useful atlas of controlling parameters which are essential for a range of material processing industries as they strive to meet the ever more stringent and cost effective requirements of the manufacture.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.1
• /
• pp.202-213
• /
• 2002

There have been a lot of research going on for developing a new blend of cosmetic ingredients. such as Porous sphere power, High functional composition power, Ultrafine power, UV sunscreen agent, Flat titanium dioxide etc. It's said that these ingredients will have multi functional effects on foundation users. Regarding foundation products. UV care effect is basic and consumers want special feelings for skin and its'transparency. People also look for a high performance foundation which helps skin stay shineless and flawless with a longlasting beautiful finish. A lot of cosmetics are produced in small quantities resulting in a greater variety depending on consumers'ages, hobbies, trends, season and environment, so more specific cosmetics should be developed. To satisfy more specific clientele, It is expected that special care product will come out. Foundations for the elderly and men are already being considered as well as ones for trans-genders are possibility. It's considered that fecundation is not a makeup but something in skin-care categories based on the development and production of high performonce foundations.

• Textile Coloration and Finishing
• /
• v.14 no.6
• /
• pp.313-318
• /
• 2002

Chitosan is known to be an excellent biocompatible natural polymer. Recently, with a growing interest of health and environment, chitosan which is good in no harmful effect on human body and environment, has been watched as the finish treatment of hygiene and pleasantness. The purpose of this study is to develop multi functional fabrics by chitosan added on acrylic acid grafted cotton fabrics. Therefore physical properties such as moisture regain, air permeability, whiteness, static voltage and tensile strength of chitosan added on acrylic acid grafted cotton fabrics were investigated. The results are as follows ; According to increased chitosan's concentration, grafting yield was decreased. Therefore thickness of film by treated chitosan added on acrylic acid grafted cotton fabric became thin. FT R spectra of chitosan add on acrylic acid grafted cotton fabric clearly showed peaks of COOH and $NH_2$, Moisture regain, static voltage of chitosan add on acrylic acid grafted cotton fabrics were increased than control. Air permeability, whiteness and tensile strength were decreased than control.

• Textile Coloration and Finishing
• /
• v.8 no.6
• /
• pp.65-72
• /
• 1996

Polyester(PET) fabrics were treated by corona discharge equipment with the small amount of flame retardants to enhance flame retardancy. The surface properties of corona discharged fabrics were investigated using water penetration time, SEM, ESCA, and TGA. When corona discharge was applied to PET fabrics, the flame retardants were evenly distributed. As a result, the oxygen-containing functional groups were produced, and the LOI value increased. Thermogravimetric analysis indicated that the flame retardancy was operative by gas-phase mechanism.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.263-268
• /
• 2005

Recently, restrooms have become a crucial aspect of improving quality of life as a redefined living sector. That offer the functional convenience to user by expansion of toilet space and various subsidiary facilities through reconfiguration of space and automation of equipment naturally, is changing to independent culture space that it is that is comfortable with a rest that comfort and affection overflow using finish introduction and properties of high-quality site. However, existing restrooms in current railway vehicle have not fulfilled such desire and short failed in many aspects of such needs. Even in restrooms for High-Speed Rail System have many areas to improve. Thus, factors encountered by users of rail system have been visually, environmentally and functionally classified.

• Journal of Welding and Joining
• /
• v.22 no.2
• /
• pp.46-50
• /
• 2004

In today's highly competitive marketplace, it is of great significance for the manufacturing industry to reduce lead-time and costs fur the product development. Since first emerged in 1986, Rapid Prototyping (RP) technology has helped successfully to reduce time and costs. Recently, RP using functional materials such as metal has been researched. However RP using the molten metal has been struggling to resolve several drawbacks, such as dimensional inaccuracy, poor surface finish, post finishing, etc., that originate primarily from the overall deposition of molten metal for each layer. So, the purpose of this study is to develop a new RP technique using sheet metal and projection welding for reducing several drawbacks in occurring RP using molten metal. Also tensile and bending specimens were made by the developed RP process using projection welding and were verified.

• Textile Coloration and Finishing
• /
• v.25 no.2
• /
• pp.140-151
• /
• 2013

In order to investigate the mechanical properties of working clothes materials considering industrial settings, the test weaving materials were compared with the existing materials depending on the season. The material design of the test fabrics were changed through fineness, composition, density of materials then subsequently treated with functional finish. As a result of evaluation of the forms according to KES-FB system, Koshi was deduced, and Numeri and Fukurami were increased. Thereby, the test weaving materials became flexible, surface became smoother, elasticity and volume characteristics indicated to have been improved. Consequently, the THV value of working clothes materials for test weaving was increased compared to existing materials which indicated improved result of the total hand value. Specially, the winter cloth material indicated improved drape characteristics and dimensional characteristics, showed improved liveliness as being compressed softly.

• Journal of Welding and Joining
• /
• v.23 no.2
• /
• pp.47-51
• /
• 2005

Rapid Prototyping (RP) technology has helped successfully to reduce time and costs since first emerged in 1986. Recently, RP using functional materials like as metal have been researched. However RP using molten metal and brazing material have been struggling to resolve several drawbacks, such as dimensional inaccuracy, poor surface finish and post finishing because occurring shrinkage and warpage at cooling. So, the purpose of this study is to develop a new RP technique using sheet metal and projection welding for reducing several drawbacks in occurring RP using molten metal. And optimum process variables were determined using desist of experiment(DOE).