• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.11-18
• /
• 2014

TSV(through silicon via) filling technology is making a hole in Si wafer and electrically connecting technique between front and back of Si die by filling with conductive metal. This technology allows that a three-dimensionally connected Si die can make without a large number of wire-bonding. These TSV technologies require various engineering skills such as forming a via hole, forming a functional thin film, filling a conductive metal, polishing a wafer, chip stacking and TSV reliability analysis. This paper addresses the TSV filling using Cu electrodeposition. The impact of plating conditions with additives and current density on electrodeposition will be considered. There are additives such as accelerator, inhibitor, leveler, etc. suitably controlling the amount of the additive is important. Also, in order to fill conductive material in whole TSV hole, current wave forms such as PR(pulse reverse), PPR(periodic pulse reverse) are used. This study about semiconductor packaging will be able to contribute to the commercialization of 3D TSV technology.

• Preventive Nutrition and Food Science
• /
• v.8 no.1
• /
• pp.54-60
• /
• 2003

To develop a functional chungkookjang; the anticancer effects of chungkookjangs prepared with different varieties of soybeans, starters, fermentation periods and seasoning additive ratios; were studied against AGS human gastric adenocarcinoma cells using the MTT assay, at different stages chungkookjang processing. The chungkookjang samples exerted different antiproliferative effects according to the variety of soybeans used. The chungkookjangs manufactured with soybean var. manrikong exhibited the highest cytotoxicity against AGS human cancer cells. The chungkookjangs fermented with rice straw and B. licheniformis strongly inhibited the growth of the AGS human cancer cells. All fermented chungkookjangs had a strong inhibitory effect on the growth of the cancer cells; however, the non-fermented soybean (chungkookjang) showed a low inhibition rate. The fermented chungkookjangs mixed with red pepper powder (RPP) and garlic exhibited strong antiproliferative effect against the cancer cells, and chungkookjang prepaved with 1.1 % RPP and 1.1 % garlic showed the highest cytotoxicity against the cancer cells. The functional chungkookjang fermented with soybean variety of manrikong and B. licheniformis for 3 days at 4$0^{\circ}C$ and then mixed with 7.9% salt, 1.l% RPP and 1.1% garlic, exhibited a higher antiproliferative effect than the chungkookjangs prepared by traditional or modified methods, according to the MTT assay. The functional chungkookjang exhibited a similar anticancer effect to the traditional doenjang. These results indicate that the fermentation period and the ratio of seasoning additives, as well as the variety of soybeans and starter cultures may affect the degree of the anticancer effect of chungkookjang.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1842-1846
• /
• 2012

The effects of hurdle techniques on the reduction of Bacillus cereus spores in Doenjang and Gochujang were investigated. In our system, Bacillus cereus spores were artificially inoculated into Doenjang and Gochujang. Hurdle techniques used in this study were additives (3% ethyl alcohol-0.03% oregano extract), Joule heating ($95^{\circ}C$ for 5 min), and hydrostatic pressure (500 MPa for 5 min at $45^{\circ}C$). Additive-Joule (AJ) and additive-Joule-pressure (AJP) treatments for Doenjang resulted in a 2.80 log and 3.74 log reduction, respectively, while treatments for Gochujang resulted in a 4.71 log and 5.60 log reduction, respectively. This suggests a high synergistic effect of Joule heating with additive treatment in Doenjang and Gochujang. A combination ofg hurdles such as additives, Joule heating, and hydrostatic pressure also kept Bacillus cereus spore counts low during storage at $30^{\circ}C$. Therefore, Bacillus cereus spores inoculated into Doenjang and Gochujang can be effectively reduced through combined treatments, including AJ or AJP.

• Korean Journal of Materials Research
• /
• v.28 no.8
• /
• pp.452-458
• /
• 2018

This research is conducted to create a functional hydrogel ophthalmic lens containing nanoparticles. Carbon nanoparticles and PEGMEMA are used as additives for the basic combination of HEMA, MA, and MMA, and the materials are copolymerized with EGDMA as the cross-linking agent and AIBN as the thermal initiator. The hydrogel lens is produced using a cast-mold method, and the materials are thermally polymerized at $100^{\circ}C$ for an hour. The polymerized lens sample is hydrated in a 0.9 % saline solution for 24 hours before the optical and physical characteristics of the lens are measured. The refractive index, water content, contact angle, light transmittance, and tensile strength are measured to evaluate the physical and optical characteristics of the hydrogel lens. The refractive index, water content, contact angle, UV-B light transmittance, UV-A light transmittance, visible light transmittance, tensile strength and breaking strength of the hydrogel lens polymer are 1.4019~1.4281, 43.05~51.18 %, $31.95{\sim}68.61^{\circ}$, 21.69~58.11 %, 35.59~84.26 %, 45.85~88.06 %, 0.1075~0.1649 kgf and 0.1520~0.2250 kgf, respectively. The results demonstrate an increase in refractive index, tensile strength and breaking strength and a decrease in contact angle and light transmittance. Furthermore, the visible light transmissibility is significantly increased at PEG 10 %. It is clear that this material can be used for high-performance ophthalmic lenses with wettability, ultraviolet ray blocking effect, and tensile strength.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.207-210
• /
• 2008

In this paper, we researched the dielectric properties and voltage dependence on slice XLPE sheet from 22[kV] and 154[kV] power cable. We studied effects for impurities and water for semiconductor shield through a dielectric properties experiment to estimate performance of insulating materials in power cable. Capacitance and $tan{\delta}$ of 22[kV], 154[kV] were 53/43[pF] and $7.4{\times}10^{-4}$, $2.1510^{-4}$. In these results, the trend was increased with the increase of temperature. The tan6 of XLPE/semiconductor layer was increased as compared with that of XLPE. Dielectric properties reliability of tan6 was small. Also, To improve mean-life and reliability of power cable in this study, we have investigated chemical properties showing by changing the content of carbon black that is semiconductive additives for underground power transmission. Specimens were made of sheet form with the three of existing resins and the nine of specimens for measurement. Chemical properties of specimens was measured by FT-ATR (Fourier Transform Attenuated Total Reflectance). The condition of specimens was a solid sheet. We could observe functional group (C=O, carbonyl group) of specimens through FT-ATR. From these experimental result, the concentration of functional group (C=O) was high according to increasing the content of carbon black. We could know EEA was excellent more than other specimens from above experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.156-157
• /
• 2006

To improve mean-life and reliability of power cable in this study, we have investigated chemical properties showing by changing the content of Carbon nanotube(CNT) that is semiconductive additives for underground power transmission. Specimens were made of sheet form with the three of existing resins and the five of specimens for measurement. Chemical properties of specimens was measured by FT-ATR (Fourier Transform Attenuated Total Reflectance). The condition of specimens was a solid sheet. We could observe functional group (C=O, carbonyl group) of specimens through FT-ATR. From these experimental result, the concentration of functional group (C=O) was high according to increasing the content of Carbon nanotube. We could know CNT/EEA was excellent more than other specimens from above experimental results.

• Korean Journal of Materials Research
• /
• v.29 no.12
• /
• pp.735-740
• /
• 2019

The purpose of this study is to fabricate an ophthalmic lens by copolymerizing two types of carbon nanotubes and hydrophilic hydrogel lens materials, and to investigate its application as an ophthalmic lens material by analyzing its physical properties and antimicrobial effect. For polymerization, HEMA (2-hydroxyethyl methacrylate), EGDMA (ethylene glycol dimethacrylate), a crosslinking agent, and AIBN (azobisisobutyronitrile), an initiator, are used as a basic combination, and a single-walled carbon nanotube and a single-walled, carboxylic-acid-functionalized carbon nanotube are used as additives. To analyze the physical properties, the water content, refractive index, breaking strength, and antimicrobial effect of the fabricated lenses are measured. The fabricated lenses satisfies all the basic properties of the basic hydrogel ophthalmic lens. The water content increases with increasing amount of additive and decreases with addition of 0.2 % ratio of nanoparticles. The refractive index is inversely proportional to the water content result. As a result of the antimicrobial test of the fabricated lens, the addition of carbon nanotubes shows an excellent antimicrobial effect. Therefore, it is considered that the fabricated lens can be applied as a functional material for basic ophthalmic hydrogel lenses.

• Korean Journal of Plant Resources
• /
• v.29 no.6
• /
• pp.642-649
• /
• 2016

This study was conducted to investigate the antioxidant activity in the leaves and stems of 50 tomato accessions, in order to examine the possibility of using tomato by-products as a functional material. The extracts of the leaves (LE) and stems (SE) were analyzed for DPPH, ABTS, and total polyphenol content (TPC). Antioxidant activities and TPC differed significantly between the LE and SE of the 50 tomato accessions. TPC in LE and SE showed wide variation, ranging from 24.4 to 60.6 and 12.5 to 18.8 mg GAE/g, respectively. The DPPH and ABTS antioxidant activities of LE ranged from 10.0 to 38.2% (scavenging effect) and 20.8 to 59.0 mg ASC/g, respectively, while the DPPH and ABTS measurements of SE were 1.4 to 8.8% and 2.2 to 22.5 mg ASC/g, respectively. As assessed by the relative antioxidant capacity index (RACI), IT033117 and IT203466 had the highest antioxidant activity in LE and SE, respectively. These results will expand the knowledge of antioxidant activity and provide information on tomato accessions valuable for the development of functional foods and food additives.

• KIEAE Journal
• /
• v.12 no.2
• /
• pp.125-129
• /
• 2012

With the development of the industry, such as homes and industries of electric energy usage and thereby increase the supply of electrical energy for power generation facilities were also increased. Among them an increase in thermal power plants, such as Bottom Ash was accompanied by an increase in industrial waste. If fly ash is recycled, some ten thousand Fly Ash and Bottom Ash Landfill, the recycling rate is low in most. In this study, in order to resolve the problem of fly ash recycling Bottom Ash to take advantage of low physical and chemical characteristics were analyzed. Evaluation of Physical Properties of Bottom Ash In addition, through the evaluation of functional properties of additives chogyeol condensation of 1 hour or more, within 3 hours of closing, Flow has more than 190mm of wheel load resistance value is less than 3mm flooring developed to study the subsequent emphasis on the Properties is based. Through these studies by developing a functional flooring help with the problem of resource depletion, and losses due to reclamation and pollution is to prevent.

• Journal of the Korean Ceramic Society
• /
• v.48 no.5
• /
• pp.360-367
• /
• 2011

Macroporous silicon carbide (SiC) ceramics were fabricated by powder processing and polymer processing using carbon-filled polysiloxane as a precursor. The effects of the starting SiC polytype, template type, and template content on porosity and flexural strength of macroporous SiC ceramics were investigated. The ${\beta}$-SiC powder as a starting material or a filler led to higher porosity than ${\alpha}$-SiC powder, owing to the impingement of growing ${\alpha}$-SiC grains, which were transformed from ${\beta}$-SiC during sintering. Typical flexural strength of powder-processed macroporous SiC ceramics fabricated from ${\alpha}$-SiC starting powder and polymer microbeads was 127 MPa at 29% porosity. In contrast, that of polymer-processed macroporous SiC ceramics fabricated from carbon-filled polysiloxane, ${\beta}$-SiC fillers, and hollow microspheres was 116MPa at 29% porosity. The combination of ${\alpha}$-SiC starting powder and a fairly large amount (10 wt%) of $Al_2O_3-Y_2O_3$ additives led to macroporous SiC ceramics with excellent flexural strength.