• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.1
• /
• pp.57-63
• /
• 1994

The logic function synthesis using ULM U$_h$ is constructed based on canonic Reed-Muller expansion coefficient for a given function. This paper proposes the fast synthesis algorithm using ULM U$_h$ for ternary function. By using circuit cost and synthesis method of proposed in this paper, order of control input variable minimum number of ULM U$_h$ can be decided in the synthesis of n-variable ternary function. Accordingly, this method enables to optimum circuit realization for ternary function synthesis using ULM ULM U$_h$ and can be applied to ternary function synthesis using ULM U$_h$. The complexity of search for select the order of all control input variables is (n+2)(n-1)/2.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.3
• /
• pp.447-452
• /
• 2013

In this paper, the leakage current detection and auto shut-off module for a concent has been developed. Existing leakage current detection modules are detecting resistive leakage current, using a resistive leakage current detection chip but the proposed leakage current detection module separates and detects resistive leakage current in the synthesis leakage current by only programming in a power processor MCU(MSP430). The module implemented by proposed method has early detection and auto shut-off feature at more than resistive leakage current 5mA, and has the advantage of easily adjusting resistive leakage current less or more than 5mA, because of resistive leakage current detection function being implemented by a program in MCU.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.77-88
• /
• 2008

This paper addresses the implementation of FTTH system based on G-PON technology. This system supports the duplication function that can switchover both TDM and data routes within 10msec. This system consists of OLT and ONU/ONT. G-PON OLT supports the maximum 32 2.5Gbps interfaces, and then has the flexibility and the scalability for supplying digital communication and broadcasting convergence service in the near future. OLT system consists switch module, subscriber module, processor module, and G-PON link module, and has the operating system based on Linux. ONU is installed in customer premise to supply TPS (Triple Play Service). Also ONT has the dedicated interface for IP-TV to improve the transmission characteristics of IP-TV signal.

• Journal of the Korea Convergence Society
• /
• v.7 no.1
• /
• pp.17-23
• /
• 2016

In this paper, we describe a case of utilizing SaaS technology to build NC Post-processor(WBS) based cloud computing. Developed WPS system was implemented to provide stable and continuous system service by utilizing SCoD methodology. WPS is designed user interface module and control engine module. The interface module is downloaded in a client PC and the control engine is installed in cloud parm area. These modules are connected with computer network. WPS was completed a function test for sheet cutting field and mold manufacturing field, and it is processing a commercial service using with improve the user's convenience and adding a bill charge module.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5134-5142
• /
• 2010

The purpose of this study is to explore the possibility of the planning method of traditional market as the urban public open space and to attempt to create the essential reformation of traditional market place. The design concepts of the Moran traditional market project are establishing module system based on function of traditional market to accomplish the practical needs of vendor and consumer and expressing the liquid and autonomic characteristics of Moran traditional market to find the new and substantial schemes of public open space. The functional design module of the market place is based on 2.1m $\times$ 2.1m grid system which is minium market unit, and it is extended to 8.4m $\times$ 8.4m basic structural module and to 50.4m $\times$ 50.4m plaza unit.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.11
• /
• pp.1074-1083
• /
• 2011

Noise of digital camera has been noticeable to its users. Particularly, noise of a barrel assembly module in zoom in/zoom out operation is recorded while taking a video. Reduction of barrel noise becomes crucial but there are not many studies on noise of digital camera due to its short history of use. In this study, experiment-based analyses are implemented to identify sources of noise and vibration because of complexity and compactness of the barrel system. Output noise is acquired in various operation conditions using synchronization for spectral analysis. Noise sources of a barrel assembly in zoom operating are first identified by the comparison with gear frequency analysis and then correlation analysis between noise and vibration is applied to confirm the generation path of noise. Analysis on noise transfer characteristic of zoom module is also carried out in order to identify the most contributing components. One of possible countermeasures of noise in zoom operating is investigated by an experimental approach.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.377-383
• /
• 2017

A tube-type ceramic membrane for microfiltration was developed, and the membrane module comprised of three membranes was also applied to biological carbon and nitrogen removal processes for post-treatment. Manufacturing the microfiltration membrane was successful with the structure and boundary of the coated and support layers within the membrane module clearly observable. Total kjeldahl nitrogen removal from effluent was additionally achieved through the elimination of solids containing organic nitrogen by use of the ceramic membrane module. Removal of suspended solids and colloidal substances were noticeably improved after membrane filtration, and the filtration function of the ceramic membrane could also easily be recovered by physical cleaning. By using the ceramic membrane module, the system showed average removals of organics, nitrogen, and solids up to 98%, 80% and 99.9%, respectively. Thus, this microfiltration system appears to be an alternative and flexible option for existing biological nutrient removal processes suffering from poor settling performance due to the use of a clarifier.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.8
• /
• pp.824-832
• /
• 2011

An essential consideration to differentiate prosthetic hand from robot hand is its convenience and usefulness rather than high resolution or multi-function of the robot hand. Therefore, this study proposes a myoelectric hand with a 2 DOF auto wrist module which has 6 essential functions of the human hand such as open, grasp, pronation, supination, extension, flexion, which improves the convenience of the daily life. It consists of the 3 main parts, the myoelectric sensor for input signal without additional attachment to operate the prosthetic hand, hand mechanism with high-torqued auto-transmission mechanism and self-locking module which guarantee the safety under the abrupt emergency and minimum power consumption, and dual threshold based controller to make easy for adopting the multi-DOF myoelectric hand. We prove the validity of the proposed system with experimental results.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.2
• /
• pp.75-81
• /
• 2018

In this paper for developing and implementing the car driver's front lane attention enhancement developed system using the car camera. The developed system automatically alarm the car driver when front cars make the dangerous situation. We use Raspberry Pi camera module V2 as car camera module, Raspberry Pi 3 board as hardware main board of implementing embedded system and develop the application library module which can be operated on the Raspberry situation. The application library module widely consist of two part, front car recognition part and dangerous situation distinguish part. Our developed system satisfy the performance test of the target system at the software test certification laboratory of TTA(Telecommunication Technology Association). We test four items as attentive car recognition ability at day and night, system performance, response time. We get the performance of developed system based on the four goal. The car driver's front lane attention enhancement system in this paper will be widely used at the ADAS(Advanced Driving Assistance System) because of the better performance and function.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.670-675
• /
• 1994

Yhis paper describes a fault diagnosis simulation of the Real-Time Multiple Fault Dignosis System (RTMFDS) for forcasting faults in a system and deciding current machine state from signal information. Comparing with other diagnosis system for single fault,the system developed deals with multiple fault diagnosis,comprising two main parts. One is a remotesignal generating and transimission terminal and the other is a host system for fault diagnosis. Signal generator generate the random fault signal and the image information, and send this information to host. Host consists of various modules and agents such as Signal Processing Module(SPM) for sinal preprocessing, Performence Monotoring Module(PMM) for subsystem performance monitoring, Trigger Module(TM) for multi-triggering subsystem fault diagnosis, Subsystem Fault Diagnosis Agent(SFDA) for receiving trigger signal, formulating subsystem fault D\ulcornerB and initiating diagnosis, Fault Diagnosis Module(FDM) for simulating component fault with Hierarchical Artificial Neural Network (HANN), numerical models and Hofield network,Result Agent(RA) for receiving simulation result and sending to Treatment solver and Graphic Agent(GA). Each agent represents a separate process in UNIX operating system, information exchange and cooperation between agents was doen by IPC(Inter Process Communication : message queue, semaphore, signal, pipe). Numerical models are used to deseribe structure, function and behavior of total system, subsystems and their components. Hierarchical data structure for diagnosing the fault system is implemented by HANN. Signal generation and transmittion was performed on PC. As a host, SUN workstation with X-Windows(Motif)is used for graphic representation.