• 한국해양공학회지
• /
• 제18권6호
• /
• pp.1-7
• /
• 2004

This paper deals with the performance analysis of the impulse turbine for a owe type wave energy conversion device. Numerical analysis was performed using the commercially-available software FLUENT. This parametric study includes variation of the setting angle of the guide vane. Since parametric study at various flow coefficients requires a tremendous amount of computing time, two-dimensional cascade flow approximation was employed to determine the optimum principal particulars in a rather simple manner. A Full three-dimensional calculation was also performed for several cases to confirm the validity of the two-dimensional approach. Results were compared to other experimental data, such as Setoguchi et al. (2001)'s extensive set of data, and found that the usefulness of 2-D analysis was well demonstrated. The advantages of each method were also evaluated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.821-827
• /
• 2015

This study concentrates on a wave energy converter with floaters that extracts the ocean's energy by moving up and down with the wave motion. The floater is connected to an arm structure, including a hydraulic cylinder that drives a hydraulic generator. This study focuses on a structural analysis of the floater unit, including arm and cylinder components, platform and jack-up system, along with spud columns. Previous studies have been conducted for miniature models for experimentation, but this study focuses on the full-scale model structural analysis. Static structural analysis is conducted using fine numerical grids. Due to the complexity of the whole model, it is analyzed in separate pieces. The floater unit, with arm and cylinder, are combined into one system. The platform is analyzed separately as a single system. There are four jack-up systems for each spud column; only one jack-up system is analyzed, as uniform loads are assumed on each system. There are several load cases for each system, all of which are analyzed thoroughly for stress (von Mises, shear, and normal) and deformation. Acceptable results were obtained for most of the components; unsafe components were redesigned.

• 조명전기설비학회논문지
• /
• 제24권6호
• /
• pp.35-42
• /
• 2010

본 논문에서는 등각사상 방법(conformal mapping method)을 사용하여 도체로 보강된 결합 도파 선로(conductor-backed coupled coplanar waveguide)의 정전기장 분포와 전위 분포를 계산하는 해석적인 수식을 유도하였다. 그리고 유도한 수식을 사용하여 결합 도파 선로 구조 전체에 분포하는 정전기장과 전위분포를 계산하고 이를 분석하였다. 논문에서 사용한 방법은 반복계산 과정을 필요로 하지 않으므로 이를 사용하면 전파해석방법(full-wave analysis method)보다 전기장분포를 빠르고 간편하게 계산할 수 있다. 이 방법은 결합기, 필터, 마이크로스트립 안테나와 같은 결합선로를 사용한 마이크로파집적회로의 분석에 폭넓게 응용될 수 있다.

• 한국군사과학기술학회지
• /
• 제9권2호
• /
• pp.26-33
• /
• 2006

A sonar dome is basically designed and installed to protect sonar array from shocks, sea wave slaps and floating matters. The acoustic wave passing through sonar dome, however, can be distorted in magnitude and phase. This paper presents a numerical method for predicting the steady-state sound pressure on the surface of transducer array in the sonar dome and typical results of sonar beam pattern affected by sonar dome. A beam tracing model with phase information and a multi-layered elastic boundary model are involved. A full three-dimensional sonar dome is modeled as a GRP acoustic window, a rubber coated steel baffle and a rubber coated steel hull. A transducer array is modeled as thick steel cylinder. There are some assumptions such as incidence of plane wave, specular reflection on boundary and directionality of transducer element.

• 대한전자공학회논문지SD
• /
• 제44권3호
• /
• pp.26-34
• /
• 2007

본 논문에서는 신체 임피던스 측정법(Bioelectrical Impedance Analysis, 이하 BIA)을 기초로 한 체지방 측정 칩 설계에 대한 내용을 서술하였다. 제안된 회로는 인체에 전류 신호를 인가하는 회로, 인체를 통해 나온 전압 신호를 측정하는 회로, 회로의 동작을 제어하는 마이크로 콘트롤러(Micom), 그리고 분석프로그램이 내장된 메모리(SRAM, EEPROMs) 의 모든 기능을 하나의 칩에 집적하였다. 특히 정밀한 인체 임피던스 측정을 위하여 다주파수 동작이 가능한 대역통과필터(Band Pass Filter, BPF)를 설계하였다. 또한, 설계된 대역통과필터는 weak inversion 영역에서 동작하기 때문에 면적과 전력소모를 줄일 수 있었다. 그리고 측정부분 회로의 성능을 개선하기 위해서 차동차이증폭기(Differential difference amplifier, DDA)를 이용한 새로운 전파정류기(Full wave rectifier, FWR)를 설계하였다. 또한 이 회로는 마지막 단에 연결될 아날로그-디지털 변환기(ADC)의 설계에 대한 부담을 덜어주는 장점도 있다. 이 칩의 시제품은 CMOS 0.35um 공정을 이용하였고 전력소모는 모든 주파수에서 6mW 이며 전원전압은 3.3V이다. 전체 칩의 크기는 $5mm\times5mm$ 이다.

• 한국지반공학회논문집
• /
• 제25권4호
• /
• pp.5-17
• /
• 2009

HWAW 기법은 시간-주파수 해석을 통해 신호/잡음비가 최대가 되는 부분을 이용하여 실험 분산곡선을 획득하고 full wavefield를 고려하는 정모델링 기법을 통해 역산을 수행한다. 따라서 다른 표면파 기법에 비해 짧은 측선 설정이 가능하며 2차원 전단파 속도 분포를 도출하기에 유리하다. 수평층 가정이 성립되지 않는 지반에서의 HWAW 기법 적용성을 평가하기 위해서 수치해석 검증 연구를 수행하였다. HWAW 기법을 통해 각 거 리별로 획득한 실험 분산곡선들은 전반적으로 full wavefield를 고려한 이론 분산곡선과 유사한 형태를 보이는 것을 확인할 수 있었다. 경사면 반사파에 의한 분산곡선의 왜곡현상은 적절한 감지기 간격 조절을 통해 줄여줄 수 있음을 확인할 수 있었다. 도출된 실험 분산곡선은 가진 원으로부터 감지기까지의 영역보다는 감지기 사이 영역에 주되게 영향을 받는 것으로 나타났다. 이로써 HWAW 기법으로 합리적인 전단파 속도 분포의 도출이 가능한 것으로 판단되었으며 고찰한 결과를 바탕으로 실제 현장에서 지반 영상화를 시도하였다.

• 항공우주시스템공학회지
• /
• 제15권6호
• /
• pp.59-65
• /
• 2021

In this paper, the transmission characteristics of the multi-layered composite material with wire mesh and honeycomb core for aircraft applications have been analyzed with the proposed method. The proposed method converts the conductive wire mesh into effective layer, while for the dielectric honeycomb core, effective permittivity has been derived based on volume fraction with the proposed method. The proposed method has been verified through comparison with full-wave simulation and revealed excellent. In addition, the calculation time of the proposed method is a few order of magnitude faster in comparison with the full-wave simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권2호
• /
• pp.146-151
• /
• 2016

This study concentrates on the design of floater for 15kW-class wave energy converter that extracts the ocean energy by oscillating vertically along the wave motion. The floater connects to a arm structure that connects to a hydraulic cylinder, which drives a hydraulic generator. The study mainly focuses on the structural analysis of the floater. Previous studies have been conducted using a miniature model; however, this study focuses on the size selection of the floater for a full scale model. Static structural analysis is conducted using fine numerical grids. Due to the complexity of the whole model, it is analyzed as a separate component. There are several load cases for each floater size, and they are analyzed thoroughly for stress (von-mises, shear, and normal) and deformation. The initial design was conducted by scaling up from the miniature model of the previous study, and the final design has been redesigned by changing the thickness and internal support structure shape.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.101-112
• /
• 2004

본 논문에서는 3차원 인터커넥트(3D interconnect) 구조를 해석하기 위하여 ADI-유한차분시간영역(ADI-FDTD: Alternating Direction Implicit Finite Difference Time Domain)법으로 맥스웰 회전 방정식(Maxwell's curl equation)을 계산하는 수치 해석 모델을 개발하였고, 개발한 ADI-유한차분시간영역법을 이용하여 3.3 V CMOS 기술로 설계된 샘플러 회로의 일부의 영역에 대해 컴퓨터 모의 실험 결과하여 입력된 구형 전압 신호가 금속 배선을 거치면서 5∼10 ps의 신호 지연과 0.1∼0.2 V의 신호 왜곡이 발생되는 것을 확인하였다. 결론적으로 ADI-유한차분시간영역법을 이용한 풀-웨이브 해석을 통하여 고속의 VLSI 인터커넥트에서의 전자기 현상을 정확하게 분석할 수 있음을 제시하였다.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.775-786
• /
• 2002

A Mixed Volume and Boundary Integral Equation Method is applied for the effective analysis of elastic wave scattering problems and plane elastostatic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions. It should be noted that this newly developed numerical method does not require the Green's function for anisotropic inclusions to solve this class of problems since only Green's function for the unbounded isotropic matrix is involved in their formulation for the analysis. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of anisotropic inclusions and voids or isotropic inclusions. In the formulation of this method, the continuity condition at each interface is automatically satisfied, and in contrast to finite element methods, where the full domain needs to be discretized, this method requires discretization of the inclusions only. Finally, this method takes full advantage of the pre- and post-processing capabilities developed in FEM and BIEM. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with orthotropic inclusions and voids or isotropic inclusions, and the analysis of plane wave scattering problems in unbounded isotropic matrix with isotropic inclusions and voids, it will be established that this new method is very accurate and effective for solving plane wave scattering problems and plane elastic problems in unbounded solids containing general anisotropic inclusions and voids/cracks or isotropic inclusions.