• 제어로봇시스템학회논문지
• /
• 제5권4호
• /
• pp.489-495
• /
• 1999

This paper contains the design specification and detail design for a towing winch system. We analyze operating condition of the system and decide the design specification for the winch system, and also perform a detail design for the subsystem such as hydraulic winch system, control equipment and power supplier at the full scale development. The performance of designed towing winch is established by load tests and sea trial tests.

• 한국군사과학기술학회지
• /
• 제3권1호
• /
• pp.47-57
• /
• 2000

This paper contains the design specification and detail design for a seaborne towing winch system. We analyze operating condition of the system and decide the design specification for the towing winch system, and also perform a detail design for the subsystem such as hydraulic winch system, control equipment and power supplier at the full scale development. The performance of designed towing winch is established by load tests and sea trial tests.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.147-155
• /
• 2006

Ice resistance estimation equations based on model tests and full-scale sea trial data from many previous research articles are studied. Measured ice resistance data and its empirical/semi-empirical estimation equations are summarized in common format and are compared with each other, considering three ship categories, i.e, icebreakers, tug/supply vessels, ice-strengthened cargo vessels. The most suitable estimation methods or prediction equations are recommended based on this ice resistance data analysis.

• 대한조선학회논문집
• /
• 제45권2호
• /
• pp.175-185
• /
• 2008

One of the concerns that arise during navigation in ice-covered waters is the magnitude of ice loads encountered by ships. However, the accurate estimation of ice loads still remains as a rather difficult task in the design of icebreaking vessels. This paper focuses on the development of simple ice load prediction formulas for the icebreaking cargo vessels. The maximum ice loads are expected from unbroken ice sheet and these loads are most likely to be concentrated at the bow area. Published ice load data for icebreaking vessels, from the model tests and also from full-scale sea trials, are collected and then several ice load prediction formulas are compared with these data. Finally, based on collected data, a semi-empirical ice load prediction formula is recommended for the icebreaking cargo vessels.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.665-678
• /
• 2007

It was applied the grouting method to fill densely the space between the bottom of the caisson and the ground with the grout mixture mixed with anti-washout admixture after locating accurately the precast caisson on three concrete landing pads but it is far different from a costly conventional method, which place concrete to build the foundation of reinforcement concrete on the spot after excavating inside of the temporary coffering wall for the bridge foundation in the sea. To verify the grouting method in advance, the full-scale trial test was performed twice on the land. After confirming the fluidity of material for the injection and some possible problems during construction and then enhancing the original design, the main process is ongoing and it has been finished 12 spots until now. The purpose of this study is to introduces for the first time in Korea the grouting method including the automatic and the manual monitoring process applied to, based on the main process of the caisson foundation finished already in the site. In a similar construction it is sincerely expected to be referred to in the future.

• Journal of Ship and Ocean Technology
• /
• 제6권3호
• /
• pp.37-45
• /
• 2002

A series of detailed study was performed to identify the sources of the propeller blade failure and resolve the problem systematically, by use of the theoretical tools and by the direct measurement and observation in the full-scale sea trials. The selection of inexperienced propulsion control system with a reversible gear system is shown to cause the serious damage to the propeller blades in crash astern maneuver, when the rotational direction of the propeller is changed rapidly. Quasi-steady analysis for propeller blade strength using FEM code in bollard backing condition indicates that the safety factor should be order of 18∼20 to avoid the structural failure for the selected propeller geometry and reduction gear system.

• 한국항해항만학회지
• /
• 제37권2호
• /
• pp.143-148
• /
• 2013

본 연구의 목적은 빙해역을 운항하는 선박의 쇄빙시 깨진 해빙에 의해 선수부 좌현 외판에 작용하는 국부 빙하중을 계측한 신호의 특성을 조사하는 것이다. 한국 최초의 쇄빙연구선인 아라온호를 이용하여 2010년 8월초 북극해에서 실선 시험을 수행하여 선수부에 설치된 변형률 게이지로부터 국부적인 빙하중에 의한 신호를 계측하였다. 국부적인 빙하중에 의한 구조 응답 특성을 반영한 계측 신호는 전형적인 유체 충격압에 대한 하중-시간 이력과 다소 다른 특성을 갖는 것도 있음이 파악되었다. 본 연구에서는 계측 신호에 대한 시간 이력을 분석하고, 무차원화된 특성값들로 나타내었다.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.513-522
• /
• 2008

In this paper, one of the widely-used ice resistance prediction methods, introduced by Spencer(1992) of the Institute for Ocean Technology, Canada, is reviewed. Spencer's component-based scaling system for ship-ice model tests is analysed to estimate the ice resistance of various types of icebreaking vessels (Canadian MV Arctic, Terry Fox, R-Class icebreaker, US icebreakers Polar Star and Healy, Russian SA-15 cargo ships, Japanese PM Teshio and a model ship). The general form and the non-dimensional coefficients in ice resistance prediction formula are obtained using the published ice model test and full-scale sea trial data. The applicability of Spencer's method on R-Class icebreaker is discussed to estimate ice resistance for the larger icebreaking cargo vessels. Additional parameters to account for the difference in hull forms of icebreakers and cargo vessels are recommended to be included in the Spencer's original ice resistance prediction formula.

• 대한조선학회논문집
• /
• 제57권1호
• /
• pp.35-44
• /
• 2020

Propeller cavitation extent, pressure fluctuation induced by cavitation, pressure distribution on propeller blade, total velocity distribution and nominal wake distribution for a MR Taker were computed in both conditions of model test and sea trial using a code STAR-CCM⁺. Then some of the results were compared with model test data at LCT and full-scale measurement (Ahn et al (2014); Kim et al (2014)] in order to confirm the availability of a numerical prediction method and to get the physical insight of local flow around a ship and propeller. The nominal wake distributions computed and measured by LDV velocimeter on the variation of on-coming velocity show the wake contraction characteristics proposed by Hoekstra (1974). The numerical prediction of propeller cavitation extent on a blade angular position and pressure fluctuation level on each location of pressure sensors are very similar with the experimental results.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.50-57
• /
• 2005

Ice resistance on ice-transiting vessels is one of th￡ important issues concerning th￡ design of ships with ice classes. In this study, th￡ development of GUI software for estimation of ice resistance on ice-transiting vessels is discussed. lee resistance estimation equations, based on model tests and full-scale sea trial data from many previous research articles, are studied in conjunction with two ship categories i.e., ,icebreakers/supply/tug vessels and ice-strengthened cargo vessels. lee resistance estimation equations are summarized in common format and are compared with each other. The GUI software 'Ice View,' written in MS Visual Basic language, can calculate ice resistances according to varying ice thickness and ship speed. The software can provide the calculated results, with suitable tables and graphs, for easy comparison of each ice resistance estimation equation.