• 전력전자학회논문지
• /
• 제9권1호
• /
• pp.10-16
• /
• 2004

본 논문에서는 공진 에너지 회생율을 최대화하여 전체적인 효율을 증가시킨 개선된 전파형 ZVT(Zero-Voltage-Transition) PWM(Pulse-Width-Modulation) DC-DC 컨버터를 소개한다. 개선된 회로는 단지 기존 컨버터의 보조스위치와 공진형 인덕터 사이에 직렬로 역공진 저지 다이오드를 추가로 달아서 모든 스위칭 소자들이 소프트 스위칭 조건에서 턴온/턴오프하여 스위칭 손실을 최소화하고, 공진 에너지를 완전히 입력으로 회귀시켜 전도손실을 절감하여 효율의 증감을 이루었다. 본 논문에서는 부스터 컨버터를 이용하여 개선된 컨버터의 동작을 분석하고, 실험결과를 바탕으로 제안된 회로의 타당성을 입증하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1394-1397
• /
• 2005

Hyundai LCD Inc. and LUXELL Technologies Inc. have jointly developed a 1.5" passive matrix full color OLED display ($132{\times}RGB{\times}96$, 111ppi) with characteristics of enhanced contrast ratio using black layer technology. This prototype ECR OLED was fabricated with the structure of ITO/HIL/HTL/RGB EML/HBL/ETL/LiF/Black Layer/Cathode and showed significant improvement of contrast ratio comparing with that of non-filtered OLED as well as compatible with circular polarizer OLED

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.989-994
• /
• 2000

Nine tests to failure are performed on full-scale eight composite beams with unreinforced web opening having ribbed slabs with formed deck which are perpendicular to the steel section and one steel beam. The effects of slab width, reinforcing of stud, moving of rib, moment-shear ratio are studied. At the low M/V ratio, Vierendeel action around the high moment end of the opening is occurred and the large deflection across the opening and transverse cracking are occurred with increasing of applied load. As the M/V ratio increases, the relative deflection across the opening decreases. And at failure, full tensile strain are occurred at bottom T section of steel beam, and concrete crushes at the High Moment End of the opening. With narrow slabs, diagonal tension failure at the high moment end of the opening is occurred. And with wide slabs, rib punch-through failure is occurred near the high moment end of the opening. The implications for design are discussed.

• Journal of the Optical Society of Korea
• /
• 제5권2호
• /
• pp.39-42
• /
• 2001

A new method of switching mode in AFLC cell is proposed for faster switching time and higher contrast ratio. In this mode the ″dark″ state is obtained by applying negative full voltage while the ″bright″ state is achieved by applying positive full voltage to the cell. The switching time is reduced to 100 $mutextrm{s}$ for the cell whose switching time is 22 ms when operated in conventional mode. The contrast ratio is also improved vastly with this method. The possibility of achieving gray scale was shown in this mode of operation.

• Journal of Biosystems Engineering
• /
• 제34권2호
• /
• pp.71-76
• /
• 2009

This study was conducted to investigate the load acting on a tractor engine when it delivers the maximum power at drawbar. The results of the drawbar tests on the 5 locally-made and 14 imported tractors conducted at NIAE in 2004, and the 15 tractors tested at OECD test stations in foreign countries were analyzed and presented by the torque load ratio, defined as a ratio of the engine torque load caused by drawbar pull to its full-load capacity, as a function of pull speed. The NIAE test results showed that the torque load ratio increased from 20 to 80% with pull speed less than 5 km/h. At speeds faster than 5 km/h, it was 80${\sim}$110% regardless of the pull speed. However, the OECD test results showed that the torque load ratio was evaluated mostly to be 70${\sim}$90% in the entire pull speed range. The same trend was also shown for the maximum drawbar load. The difference in the torque load ratio may be attributable to bias-ply tires for locally-made and some imported tractors. It is also suggested that the input torque load may be increased safely up to 120% of the full load capacity of the tractor engine for an accelerated life test of tractor transmissions.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.109-116
• /
• 2019

This paper carried out numerical analysis for estimating the propulsion performance of the model scale ONRT benchmark model of'Tokyo 2015 a workshop on CFD'. The method reflecting the scale effect of ITTC'78 method and form factor were used to compare the estimates of the effective wake ratio of full-scale. The numerical calculation was performed with Siemens's Star-CCM+, compared with IIHR model tests and the numerical analysis results of other research institutes, showing good agreement. In the case of an open stern and twin skeg ship, the validity of the ITTC'78 method can be confirmed by assuming that the effective wake ratio estimated from the numerical analysis results of model scale is similar to the effective wake ratio of full-scale.

• 한국통신학회논문지
• /
• 제32권12A호
• /
• pp.1260-1266
• /
• 2007

송신국 (Source) 과 릴레이 사이의 중계 링크에서 발생한 오류는 복호 후 전달(decode-and-forward, DF) 릴레이 시스템의 성능을 제한하고 릴레이와의 협력으로 얻을 수 있는 최대 다이버시티 이득을 얻지 못 하도록 한다. 또한, 전체 복호 후 전달 릴레이 시스템의 오류 확률은 릴레이와 수신국 (destination)에서 발생한 에러의 합으로 표현되므로 최대 다이버시티 이득을 얻기 위해서는 중계 링크의 오류 확률은 수신국에서 오류 전파 없이 maximum ratio combining (MRC)을 적용한 오류 확률보다 작아야 한다. 이러한 조건을 만족시키는 릴레이의 위치 범위에 릴레이가 위치하게 되면 최대 다이버시티 이득을 얻을 수 있다. 뿐만 아니라 본 논문에서는 최대 다이버시티 이득을 얻으면서 릴레이의 전송파워를 최소화하는 위치를 정하므로 최대 다이버시티 이득을 얻는 다는 전제하에서 전체 시스템이 최소의 파워를 사용할 수 있도록 한다. 이를 입증하기 위해 본 논문은 전체 오류 확률의 분석과 모의실험들을 수행 한다.

• Journal of Yeungnam Medical Science
• /
• 제35권2호
• /
• pp.187-191
• /
• 2018

Background: Respiratory distress syndrome (RDS) is a one of the most common cause of respiratory morbidity and mortality in neonates. This study was conducted to investigate the risk factors for RDS in full-term neonates. Methods: We conducted this retrospective study using medical records. The study group included 80 full-term neonates diagnosed with RDS and hospitalized in the neonatal intensive care unit between January 2012 and December 2016, at Yeungnam University Hospital. We analyzed sex, gestational age, birth weight, delivery method, maternal age, number of pregnancy, history of abortion, and complication of pregnancy. The control group included 116 full-time neonates who were hospitalized with jaundice during the same period. Results: The incidence of full-term RDS was more common in males (odds ratio [OR], 3.288; 95% confidence interval [CI], 1.446-7.479), cesarean section (OR, 15.03; 95% CI, 6.381-35.423), multiparity (OR, 4.216; 95% CI, 1.568-11.335). The other factors rendered no significant results. Conclusion: The risk factors for RDS in full-tern neonates were identified as male sex, cesarean section, and multiparity. Further studies involving more institutions are needed to clarify the risk factors for RDS in full-term infants.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1608-1615
• /
• 2004

CFD data compression methods based on Full-3D and Quasi-1D supercompact multiwavelets are presented. Supercompact wavelets method provide advantageous benefit that it allows higher order accurate representation with compact support. Therefore it avoids unnecessary interaction with remotely located data across singularities such as shock. Full-3D wavelets entails appropriate cross-derivative scaling function & wavelets, hence it can allow highly accurate multi-spatial data representation. Quasi-1D method adopt 1D multiresolution by alternating the directions rather than solving huge transformation matrix in Full-3D method. Hence efficient and relatively handy data processing can be conducted. Several numerical tests show swift data processing as well as high data compression ratio for CFD simulation data.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.518-519
• /
• 2012

This paper suggested a fuel cell generation system which combined interleaved full-bridge converter with half-bridge inverter. High ratio step-up converter is essential to use the power as general voltage source. Full-bridge converter has high efficiency and can boost the input voltage to high output with transformer. With series connected capacitors, interleaved full-bridge converter and half-bridge inverter are combined. Half-bridge inverter has two fewer switches compared to full-bridge type. Also, switching loss can be reduced. The performance is verified through simulation with 1.5[kW] fuel cell generation system.