• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.32.2-32.2
• /
• 2010

The Korean Solar Radio Burst Locator (KSRBL) is a single dish radio spectrograph, which is designed to record the spectra of microwave (0.5 - 18 GHz) bursts with 1 MHz spectral resolution and 1 s time cadence, and locate their positions on the solar disk within 2 arcmin. It was installed at KASI in 2009 August, and operational thereafter. The antenna pointing coefficients were initially determined during the installation and refined later using a series of antenna pointing calibrations. The filter to prevent the radio frequency interference around 2 GHz was designed and is to be installed. After the installation, the full frequency coverage will be recovered from the temporarily restricted frequency coverage (5 - 14 GHz). Also an effort to solve a couple of minor problems for the full performance of the system is in progress.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.11b
• /
• pp.34-42
• /
• 1999

The present investigation has focused up on the study of the adsorption of three different molecular mass fractions of a polyDiMethylDiAllylAmmoniumChloride (DMDAAC) (8750(LM\ulcorner), 48000(MM\ulcorner) and 1200000(HM\ulcorner)) on bleached chemical fibres. Both kinetics of adsorption and equilibrium adsorption measurements have been conducted and each adsorption has been measured by polyelectrolyte titration. The results show that the LM\ulcorner polymer can reach all of the charges in the fibre wall whereas the MM\ulcorner and HM\ulcorner can only reach the external surfaces of the fibres. It is also shown that the kinetics of adsorption of the LMw polymer is not at all affected by the presence of a saturated layer of HMw polymer on the surface of the fibres. Finally, the results from the investigation show that it is possible to have full coverage of the external surface of the fibres by a high molecular mass polymer and a full coverage of the internal surface of the fibres with a low molecular mass polymer. This is true if the high molecular masspolymer is added first followed by addition of the low molecular masspolymer.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.86-94
• /
• 1998

The rosette-scan seeker is a device mounted on the infrared guided missile. It offers the positions and iamges of target to missiles servo system by scanning a space about target in rosette pattern with a single detector. An instantaneous field of view (IFOV), which is a diameter of a detector moving along the path of the rosette pattern, has the property that its smaller size provide the less interference of background signals and detector noise. If its size is too small to voer the total field of view (TFOV), however, it produces the invisible regions in the TFOV. In this case, the invisible regions cause the performance of the seeker to deteriorate. For full scan-coverage, it is necessary to design the small IFOV without the invisible regions in the TFOV, as possible. In this paper, we propose the new method of designing the smaller IFOV than the conventional method and verify full coverage of the scanned region. By comparing the nose equivalent flux density (NEFD) of the proposed method with the that of the conventional one, we confirm that the former is better than the latter in terms of performance.

• Journal of the Korean Magnetics Society
• /
• v.1 no.2
• /
• pp.1-8
• /
• 1991

The electronic and magnetic structure of Fe overlayers on W(110) is determined by means of the all-electron local spin density full potential linearized augmented plane wave (FLAPW) method with a single slab approach. Charge and spin densities, magnetic moments, contact hyperfine fields, and layer projected density of states (LDOS) are presented. For bilayer Fe coverage, we find magnetic moments to be 2.90 and 2.30 ${\mu}_B$ for the surface and subsurface Fe layers, respectively, corresponding to a 18% enhancement of the total magnetization compared with the calculated bulk value (2.22${\mu}_B$);For monolayer coverage the moment is 2.56 ${\mu}_B$ which is enhanced by 16% compared to bulk. Unusual changes in the magnetic hyperfine interaction are found in going from a monolayer to a bilayer coverage. Comparison of the results to the theoretical ones of the clean Fe(110) to discuss the hybridization and the negative pressure effects. We discuss our results by comparing them to experimental results.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.5
• /
• pp.507-518
• /
• 2022

The purpose of this research is to obtain experimental data for developing a structural design of an external insulation system by evaluating the shear performance of a composite insulation system according to the adhesive type. The shear performance of the composite insulation system was experimentally evaluated by considering a simultaneous placement method, full and spot/edge coverage using adhesive mortar. As a result of the test, the shear strength of simultaneous placement and full coverage method was almost similar, the spot/edge coverage method was about 80% of them. Also, the simultaneous placement method is considered to be constructively advantageous when applied as an external insulation system to a high-rise building compared to using an adhesive mortar.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5464-5488
• /
• 2019

The multi-population genetic algorithm in multi-target paths coverage has become a top choice for many test engineers. Also, information sharing strategy can improve the efficiency of multi-population genetic algorithm to generate multi-target test data; however, there is still space for some improvements in several aspects, which will affect the effectiveness of covering the target path set. Therefore, a multi-target paths coverage strategy is proposed by improving multi-population genetic algorithm based on individual information sharing among populations. It primarily contains three aspects. Firstly, the behavior of the sub-population covering corresponding target path is improved, so that it can continue to try to cover other sub-paths after covering the current target path, so as to take full advantage of population resources; Secondly, the populations initialized are prioritized according to the matching process, so that those sub-populations with better path coverage rate are executed firstly. Thirdly, for difficultly-covered paths, the individual chromosome features which can cover the difficultly-covered paths are extracted by utilizing the data generated, so as to screen those individuals who can cover the difficultly-covered paths. In the experiments, several benchmark programs were employed to verify the accuracy of the method from different aspects and also compare with similar methods. The experimental results show that it takes less time to cover target paths by our approach than the similar ones, and achieves more efficient test case generation process. Finally, a plug-in prototype is given to implement the approach proposed.

• Journal of Periodontal and Implant Science
• /
• v.52 no.6
• /
• pp.466-478
• /
• 2022

Purpose: Coronally advanced split-or full-thickness (CAST or CAFT) flaps in combination with subepithelial connective tissue grafts (SCTGs) are commonly used in root-coverage procedures despite postoperative pain and bleeding from the graft donor site. Therefore, the modified vestibular incision subperiosteal tunnel access procedure (VISTAX) uses a novel collagen matrix (VCMX) instead of autogenous tissue to address the limitations associated with autogenous tissue grafting. This retrospective study compared the clinical outcomes of VISTAX to the results obtained after using a CAST or CAFT flap in combination with SCTG for root coverage. Methods: Patients with single or multiple adjacent recession I/II defects were included, with 10 subjects each in the VISTAX, CAFT, and CAST groups. Defect coverage, keratinized tissue width, esthetic scores, and patients' perceived pain and dentinal hypersensitivity (visual analogue scale [VAS]) were assessed at baseline, 3 months, and 6 months. Results: All surgical techniques significantly reduced gingival recession (P<0.0001). Defect coverage, esthetic appearance, and the reduction in dentinal hypersensitivity were comparable. However, the VAS scores for pain were significantly lower in the VISTAX group than in the CAFT and CAST groups, which had similar scores (P<0.05). Furthermore, the clinical results of VISTAX and CAFT/CAST generally remained stable at 6 months. Conclusions: The clinical outcomes of VISTAX, CAFT, and CAST were comparable. However, patients perceived significantly less pain after VISTAX, indicating a potentially higher patient acceptance of the procedure. A prospective trial with a longer follow-up period and a larger sample size should therefore evaluate VISTAX further.

• Journal of Periodontal and Implant Science
• /
• v.25 no.1
• /
• pp.146-152
• /
• 1995

A mucogingival grafting procedure has been developed to cover denuded root surfaces. The subepithelial connective tissue graft is composed of a free connective tissue graft and an overlying pedicle graft. The source of connective tissue graft were trap door approach and thining of a full thickness palatal flap. The purpose of this study was compare a two different connective tissue obtaining method. In this study, where palatal pocket was present, pocket elimination was performed, and the tissue normally discarded after thinning of the palatal flap was used as a grafting material. The results were as follows : 1. The mean difference between trap door approach and thinning procedure for root coverage were $2.1{\pm}O.lmm$, $2.2{\pm}O.2mm$. 2. The mean difference between trap door approach and thinning procedure for pocket depth change were $O.2{\pm}O.lmm$, $O.2{\pm}O.2mm$. 3. The mean difference between trap door approach and thinning procedure for attachment gain were $2.1{\pm}O.2mm$, $2.4{\pm}O.2mm$. 4. The esthetics in recipient site, both color match and tissue contour, were acceptable to the patient in all cases. 5. Therefore, thinning procedure were similar to trap door approach in root coverage effect.

• Journal of the Korean Burn Society
• /
• v.22 no.2
• /
• pp.58-65
• /
• 2019

Wound caused by high-tension electrical burns is difficult to manage because the wound is deep and complex. The wound is progressively necrotic due to microvascular injury resulting in deep tissue exposure. So, coverage of the wound at the entry point and the exit point is cumbersome, often requiring flap coverage. We experienced a case of one patient for peroneal artery perforator free flap coverage on the palm of the right hand of the entry point of electrical burn. The left foot wound of electrical exit point was covered by full thickness skin graft. Also a small wound was on the left side of the lower back was the exit point of electrical burn. The lower back wound was healed and recurred repeatedly after burn. On postburn day 6 month, through the radiologic exam, metal shadow was identified in the left gluteus muscle forming chronic sinus. We explored the wound of sinus and a foreign body was identified in the sac as multi braid wires thin as hair. According to the patient's past history, we suspected that the back wound was caused by electrical burn injury through the wires.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.729-736
• /
• 2005

In this paper, we introduce a new approach for the design of uplink sub-channel allocation and power control in the High-speed Portable Internet system that is based on OmMAnDD scheme. In OFDMA system, because the number of allocated sub-channel in mobile station varies from one to the whole sub-channel as in base station while mobile station's transmit power is lower than that of base station, full loading range(FLR) constraint occurs where whole sub-channel can be used and the conventional open-loop power control scheme can not be used beyond FLR. We propose a new scheme that limits the maximum sub-channel allocation number and uses power concentration gain(PCG) depending on location of mobile station, which is based on ranging in OfDMA system. Simulation results show that the proposed scheme extends the uplink coverage to the entire cell service coverage area, provides solutions for optimum utilization of radio resource and enables open-loop power control beyond FLR without extra hardware complexity.