• Archives of Reconstructive Microsurgery
• /
• v.25 no.1
• /
• pp.15-18
• /
• 2016

Any types of burn injury that involve more than deep dermis often require reconstructive treatment. In gluteal region, V-Y fasciocutaneous advancement flap is frequently used to cover the defect. However, in case of large burn wounds, this kind of flap cannot provide adequate coverage because of the lack of normal surrounding tissues. We suggest V-Y adipofascial flap using the surrounding superficially damaged tissue. We present the case of a patient who was referred for full-thickness burn on gluteal region. We performed serial debridement and applied vacuum-assisted closure device to defective area as wound preparation for coverage. When healthy granulation tissue grew adequately, we covered the defect with surrounding V-Y adipofascial flap and the raw surface of the flap was then covered with split-thickness skin graft. We think the use of subcutaneous fat as an adipofascial flap to cover the deeper defect adjacent to the flap is an excellent alternative especially in huge defect with uneven depth varying from subcutaneous fat to bone exposure in terms of minimal donor site morbidity and reliability of the flap. Even if the flap was not intact, it was reuse of the adjacent tissue of the injured area, so it is relatively safe and applicable.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.3
• /
• pp.1-15
• /
• 1998

In this paper, we propose a partial scan test method which can be applied to large VLSI designs. In this method, it is not necessary to hold neither scanned nor unscanned flip-flops during scan in, test application,or scan out. This test method requires almost identical design for testability modification and test wave form when compared to the full scan test method, and the method is applicable to large VLSI chips. The well known FAN algorithm has been modified to devise to sequential ATPG algorithm which is effective for the proposed test method. In addition, a partial scan algorithm which is effective for the proposed test method. In addition, a partial algorithm determined a maximal set of flip-flops which gives high fault coverage when they are unselected. The experimental resutls show that the proposed method allow as large as 20% flip-flops to remain unscanned without much decrease in the full scan fault coverage.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.6
• /
• pp.427-431
• /
• 2021

Objectives: The aim of this study was to describe a simple, convenient, and reliable new technique using local full-thickness skin graft (FTSG) for skin coverage of a donor-site defect of the radial forearm free flap (RFFF). Patients and Methods: Between April 2016 and April 2021, five patients with oral squamous cell carcinoma underwent mass resection combined with RFFF reconstruction. After RFFF harvesting, donor-site defects were restored by proportional local FTSG. Results: The donor-site defects ranged in size from 24 to 41.25 cm², with a mean of 33.05 cm². Good or acceptable esthetic outcomes were obtained in all five patients. There was no dehiscence, skin necrosis, wound infection, or severe scarring at the graft site through the end of the postoperative follow-up period, and no patient had any specific functional complaint. Conclusion: The proportional local FTSG showed promising results for skin coverage of the donor-site defect of the RFFF. This technique could decrease the need for skin grafts from other sites.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.3
• /
• pp.173-180
• /
• 2020

PURPOSE. This study compared digital (reference point matching) and replica methods for measuring marginal and internal fit of full coverage restorations. MATERIALS AND METHODS. A maxillary left first molar typodent was fixed on to an aluminum base and prepared to receive all-ceramic full coverage restoration. The model was scanned with an intraoral scanner (CEREC Omnicam, Sirona, York, PA, USA). Twelve crowns were fabricated from lithium disilicate blocks (IPS emax CAD, Ivoclar Vivadent) and then crystalized. Marginal and internal fit of each restoration was measured by two examiners using replica and a new digital three-dimensional technique. Reliability between the two methods and two examiners was assessed by correlation and Cronbach's Alpha coefficient (P<.05). A Bland-Altman assessment for agreement was used to compare the two methods. RESULTS. Bland-Altman assessment showed that the mean of difference for marginal, absolute marginal, and axial gap was respectively -1.04 ㎛, -41.9 ㎛, and -29.53 ㎛ with limit of agreement (LOA) between -37.26 to 35.18 ㎛ for marginal, -105.85 to 22.05 ㎛ for absolute marginal and -80.52 to 22.02 ㎛ for axial gap. Positive correlation for repeatability (P<.05) in determining marginal and internal gaps by the two examiners in both techniques was revealed. Reliability of both techniques in all sites of measurements was at least good (0.8 ≤ α < 0.9). CONCLUSION. Both measuring techniques appeared highly reliable for evaluating fit of fixed dental restorations, while reference point matching provided higher values in axial and absolute marginal gap assessment.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4492-4507
• /
• 2021

In camera sensor networks (CSNs), in order to better identify the point, full-view problem requires capture any facing direction of target (point or intruder), and its coverage prediction and sensor density issues are more complicated. At present, a lot of research supposes that a large number of homogeneous camera sensors are randomly distributed in a bounded square monitoring region to obtain full-view rate which is close to 1. In this paper, we deduce the sensor density prediction model in heterogeneous deployed CSNs with arbitrary full-view rate. Aiming to reduce the influence of boundary effect, we introduce the concepts of expanded monitoring region and maximum detection area. Besides, in order to verify the performance of the proposed sensor density model, we carried out different scenarios in simulation experiments to verify the theoretical results. The simulation results indicate that the proposed model can effectively predict the sensor density with arbitrary full-view rate.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.2
• /
• pp.70-79
• /
• 2020

Purpose: The purpose of this study was to evaluate the effect of attachments and palatal coverage on stress distribution in maxillary implant overdenture using finite element analysis. Materials and Methods: Four maxillary overdenture 3-D models with four implants placed in the anterior region were fabricated with computer-aided design. 1) Ball-F: Non-splinted ball attachment and full palatal coverage, 2) Ball-P: Non-splinted ball attachment and U-shaped partial palatal coverage, 3) Bar-F: Splinted milled bar attachment and full palatal coverage, 4) Bar-P: Splinted milled bar attachment and U-shaped partial palatal coverage. Stress distribution analysis was performed with ANSYS workbench 14. 100 N vertical load was applied at the right first molar unilaterally and maximum stress was calculated at the implant, peri-implant bone and mucosa. Results: The use of the ball attachment showed lower maximum stress on implant and peri-implant bone than the use of the milled bar attachment. But it showed contrary tendency in the mucosa. Regardless of attachment, full palatal coverage showed lower maximum stress on implant, peri-implant bone and mucosa. Conclusion: Within the limitation of this study, ball attachment improved stress distribution on implant and peri-implant bone rather than milled bar attachment in maxillary implant overdenture. Also, full palatal coverage is more favorable in stress distribution.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1936-1939
• /
• 2002

Much recent attention on wireless technologies s put on topology-less wireless network, in which all nodes an be mobile and can communicate over wireless links, due to its ease of deployment, high flexibility and low expenses. One key in topology-less wireless network is mobile base stations (MBSs), which provides access points or mobile terminals (MTs) to wireless backbone network. MBSs can move to anywhere in accordance with changes in geographical distribution of MTs. They serve as dynamic odes. However, in order to utilize network resources and take full advantage of this topology-less network, MBSs must move to suitable position according to the current tate of network use. Moreover, MBSs have to consider the distance among them to avoid the crash and gap area of MBSs. Therefore, this paper proposes MBS movement algorithm by implementing push-pull method to fulfill the corporation of MBSs and considering the center of covered MTs or centroid to satisfy the MT coverage. From the simulation results, the proposed algorithm increases the performance of system when comparing with the centroid-based algoriom〔7〕, such as coverage area, MT coverage and call drops rate.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.600-609
• /
• 2016

In this paper, we propose a two-stage base station (BS) sleeping scheme to save energy consumption in cellular networks. The BS sleeping mode is divided into a light sleeping stage and a deep sleeping stage according to whether there is a user in the BS's coverage. In the light sleeping stage, a BS will retain its coverage and frequently switch between the on state and the doze state according to the service characteristics. While in the deep sleeping stage analysis, the BS will shut down its coverage, and neighbor BSs will patch the coverage hole. Several closed-form formulas are derived to demonstrate the power consumption in each sleeping stage and the stage switching conditions are discussed to minimize the average power consumption. The average traffic delay caused by BS sleeping and the average deep sleeping rate under a given traffic load have also been studied. In addition, it is shown that BS sleeping is not always possible because of the limited quality of service (QoS) requirements. Simulation results show that the proposed scheme can effectively reduce the average BS power consumption, at the cost of some extra traffic delay. In summary, our proposed framework provides an essential understanding of the design of future green networks that aim to take full advantage of different stages of BS sleeping to obtain the best energy efficiency.

• Journal of Veterinary Science
• /
• v.24 no.1
• /
• pp.14.1-14.15
• /
• 2023

Background: The management of feline hindlimb full-thickness skin defects is challenging. On the other hand, the use of a semitendinosus (ST) myocutaneous flap for their coverage has not been reported. Objectives: To describe the ST flap and compare it with second intention healing for managing hindlimb full-thickness skin defects. Methods: In 12 purpose-bred laboratory domestic short-haired cats, two wounds were made on each tibia. The wounds in group A (n = 12) were covered with ST flaps, and those in group B (n = 12) were left to heal by second intention. In both groups, clinical assessment scoring and planimetry were performed between one-30 d postoperatively. Computed tomography-angiography (CTA) was performed on days zero, 10, and 30, and histological examinations were performed on days zero and 14 and at 6 and 12 mon postoperatively. Results: Statistically significant differences in the clinical assessment scores were observed between groups A and B on days 14 (p = 0.046) and 21 (p = 0.016). On the other hand, the time for complete healing was similar in the two groups. CTA revealed significant differences in the muscle width (day 0 compared to days 10 and 30 [p = 0.001, p = 0.026, respectively], and days 10 to 30 [p = 0.022]), ST muscle density, and the caliber of the distal caudal femoral artery and vein (day 0 compared to day 10 [p < 0.001], and days 10 to 30 [p < 0.001]). Histologically significant differences in inflammation, degeneration, edema, neovascularization, and fibrosis were observed on day 14 compared to zero and 6 mon, but no differences were found between the time interval of 6 and 12 mon. Conclusions: An ST flap can be used effectively to manage hindlimb full-thickness skin defects.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2011.10a
• /
• pp.49-53
• /
• 2011