• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.116-121
• /
• 1993

A single crystla of zeolite $Na_{78}Rb_{28}-X$ (approximate composition) was prepared by exposing $Na_{92}-X$ at $350^{\circ}C$ to 0.1 Torr of rubidium vapor, and its structure was determined by single-crystal x-ray diffraction methods in the cubic space group, Fd3, ${\alpha}=25.045(4){\AA}$. The structure was refined to the final error indices $R_1=0.082$ and $R_2=0.084$ with 353 for which I>$3{\sigma}(I)$. Only about 28 of the 92 $Na^+$ ions per unit cell were reduced and only about 14 of the 28 $Na^0$ atoms produced were retained within the zeolite. A $Na_5{^{4+}}$ cluster is present within each sodalite cavity. It is a centered tetrahedron (like $CH_4$) with bond $length=2.80(2){\AA}$ and angle tetrahedral by symmetry, and shows the full symmetry of its site. $T_d$, at the center of the sodalite cavity. Each of the four terminal atoms of the $Na_5{^{4+}}$ cluster bond to three framework oxygens at $2.36(2){\AA}$. At the centers of some double 6-rings are sodium atoms which bridge linearly between $Na_5{^{4+}}$ clusters to form agglomerations such as short zig-zag chains $Na_5{^{4+}}$ clusters. Delocalized electrons, located primarily on the sodiums at centers of the sodalite and (likely) double-six-ring cavities, contribute to the stability of the clusters.

• Journal of the Korea Concrete Institute
• /
• v.19 no.6
• /
• pp.717-726
• /
• 2007

If conventional reinforcements are used for high-strength concrete (HSC) structures, a large amount of the reinforcement must be required to compensate for the brittleness of HSC and make the best use of HSC. This raises some structural problems such as steel congestion and an increase in self-weight. Therefore, alternative reinforcing materials and methods for HSC structures are needed. In this study, four full-scale beam specimens constructed with HSC (100 MPa) were tested to investigate the effect of the different shear reinforcements on the shear behavior. These four specimens were reinforced for shear stirrups with normal and high strength steels, headed bars, and carbon fiber-reinforced polymer (CFRP) bars, respectively. In addition, steel fibers were added to the HSC in the two of the specimens to observe their beneficial effects. The use of high strength steels resulted in the improvement of the shear capacity since the shear resistance provided by the shear reinforcements and the bond strength were increased. The specimen reinforced with headed bars also showed a superior performance to the conventional steel reinforced specimen due to the considerably high anchorage strength of headed bar. CFRP bars used in this research, however, seemed to be inadequate for shear reinforcement because of the inferior bond capacity. The presence of the steel fibers in concrete led to remarkable improvement in the ductility of the specimens as well as in the overall cracks control capability.

• Korean Security Journal
• /
• no.44
• /
• pp.225-250
• /
• 2015

The purpose of this study is to explore the relative influences of juvenile delinquency using variables from Hirschi's social bonding theory, Agnew's general strain theory, Gottfredson and Hirschi's self-control theory, and Akers' social learning theory. The data derived from a sample of 2,018 high school students taken from National Youth Policy Institute in 2013. Multiple OLS regression analysis indicated that social learning theory has the greatest impact on dependent variables than other theories. The results of regression analyses also explore the notion that without the social bond, general strain, and self-control variables, there is very little loss of explained variance when these variables are removed from the full equation. However, when the social learning factors are eliminated from the full equation, the change in $R^2$ is dramatic. This result supported the idea that social learning variables had the strongest effect on the juvenile delinquency of Korean adolescents. The most important implication of this study is that it is the first study to test four major theoretical models for juvenile delinquency in Korea. It also makes a number of important contributions toward the further utilization of social learning in investigating juvenile delinquency for Korean high school students.

• Korean Journal of Crystallography
• /
• v.17 no.1
• /
• pp.10-13
• /
• 2006

The crystal structure of Ethylenediammonium chromate, $C_2H_{10}N_2{\cdot}CrO_4$, has been determined by X-ray crystallography. Crystal data: a=6.667(2), b=8.845(2), c:11.827(2) ${\AA}$, Orthorhombic, $P2_12_12_1$(Space Group No=19), Z=4, V=697.4(3) ${\AA}{^3},\;Dc=1.696gcm^{-3},\;{\mu}=1.594mm^{-1}$. The structure was solved by Patterson method and refined by full matrix least-square methods using unit weights. The final R and S values were $R_1=0.0254,\;R_w=0.070,\;R_{all}=0.0255$ and S=1.133 for the observed 1195 reflections. Bond length and angles of two ions are similar to the previously reported data. The ethylenediammonium ion has trans-configuration and are linked through many hydrogen bonds with neighboring anions.

• Korean Journal of Crystallography
• /
• v.5 no.2
• /
• pp.78-84
• /
• 1994

The crystal structure of N-11-(benzotriazol-1-yl)butyl]-P-nitroaniline ( C16H17N502) has been determinedfromsingle crystal x-ray diffractionstudy:C16H17N502 monoclinic, P21/n, a=17542(2)A, b=10.755(3)A, c=8.891(1)A, β=104.58(1)˚, V=1623.4(5)A3, 7=293(2)K, Z=4, Cuka(A = 1.5418A) , The molecular structure was solved was by direct meshed refined by full-matrix least squares to a final R =0.0411 for 2248 unique observed [F≥4o(p) ] reflections and 255 Parameters. The crystal structure is stabilized by intermolecular N (11) -Hl 1 (Nl 1) ‥‥N (3) hydrogen bond with N(11) ‥‥ N(3) =3.136(2)A and N(11)-Hll(Nll)‥‥N(3) =164.1(15) ˚.

• Parasites, Hosts and Diseases
• /
• v.55 no.4
• /
• pp.451-455
• /
• 2017

Echinostoma cinetorchis is an oriental intestinal fluke causing significant pathological damage to the small intestine. The aim of this study was to determine a full-length cDNA sequence of E. cinetorchis endoribonuclease (RNase H; EcRNH) and to elucidate its molecular biological characters. EcRNH consisted of 308 amino acids and showed low similarity to endoribonucleases of other parasites (<40%). EcRNH had an active site centered on a putative DDEED motif instead of DEDD conserved in other species. A recombinant EcRNH produced as a soluble form in Escherichia coli showed enzymatic activity to cleave the 3'-O-P bond of RNA in a DNA-RNA duplex, producing 3'-hydroxyl and 5'-phosphate. These findings may contribute to develop antisense oligonucleotides which could damage echinostomes and other flukes.

• Journal of the Korea Concrete Institute
• /
• v.23 no.5
• /
• pp.591-601
• /
• 2011

An experimental study was performed to evaluate the seismic performance of beam-column connections using 600 MPa re-bars for beam flexural reinforcement. Three full scale specimens of interior beam-column connection and two specimens of exterior beam-column connection were tested under cyclic loading. The specimens were designed to satisfy the requirements of Special Moment Frame according to current design code. The structural performance of the specimens with 600 MPa re-bar were compared with that of the specimen with 400 MPa re-bars. The test results showed that bond-slip increased in the beam-column joint. However, the load-carrying capacity, deformation capacity, and energy dissipation capacity of the specimens with 600 MPa re-bar were comparable to those of the specimens with 400 MPa re-bars.

• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.6-10
• /
• 1993

11 β ,17 β -dihydroxy-9a-fluoro-l7a-methyl androst-4-en-3-one (Fluoxymesterone), CgoH29 FO,, orthorhombic, P2,2,2,, a=13.468(5) A, b= 19.554 (2)A, c=6.578(9)A, a=b=r=90˚, A (CuKa)=1.5406 A , Dm=1.289cm-3, Dc=1.299cm-3 and Z=4 at T=298k. The structure was solved by direct method using seminvariants of ggg Parity group and refined by the full-matrix least-square method, resulting model with reliability factor R=0.069 for 1098 unique reflection over 3σ . Ring A is an 1β-2a-half chair, 5 ring has a highly symmetrical chair conformation, C ring is in a distorted chair conformation and D ring is a 13aenveLope conformation. In the crystal structure, the molecules are packed with a hydrogen bond of 011-H23‥‥03(0.5+x, 1.5-y, 1.0-z) [1.94(9) A of H‥‥0.2.786(9)A of 0‥‥0 and 165(8) ˚ of

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.58
• /
• pp.179-213
• /
• 2013

While a performance type guarantee is required as a security for non-performance risk by a seller, a payment guarantee is used as a security for non-payment risk by a buyer(or a borrower in a loan agreement). A payment guarantee is a type of independent bank guarantee, bank guarantee, bond, demand guarantee, or standby letter of credit. A guarantor accepts a credit risk of a principal which is normally a buyer in a contract for sale of goods. A payment guarantee is independent of the underlying relationship between the applicant and the beneficiary. The guarantor is only empowered to examine the beneficiary's demand and determine the payment on its face to the terms of the guarantee. A payment guarantee is thus different from a suretyship. The principle of independence carries a significant advantages for a guarantor as well as for a beneficiary. While a documentary credit requires B/L, commercial invoice, packing list, inspection certificate, etc., a typical payment guarantee does not require any evidence for a seller's performance of the underlying contract other than written demand. In this respect payment guarnatee can be a more secured facility than a documentary credit. A payment guarantee normally comes into force from the issuing date and shall remain in effect until all sums guaranteed shall be paid in full by a buyer(or a borrower) or by a guarantor. Although a guarantor shall pay a demand made in accordance with the terms and conditions of the payment guarantee, a payment demand may be denied when it is determined to be abusive or unfair.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.25-31
• /
• 2015

Due to environmental regulations (RoHS, WEEE and ELV) of the European Union, electronics and automotive electronics have to eliminate toxic substance from electronic devices and system. Specifically, reliability issue of lead-free solder joint have an increasing demand for the car electronics caused by ELV banning. The authors prepared engine control unit and cabin electronics soldered with Sn-3.0Ag-0.5Cu (SAC305). To compare with the degradation characteristics of solder joint strength, thermal cycling test (TC), power-thermal cycling test (PTC) and series tests were conducted. Series tests were conducted for TC and PTC combined stress test using the same sample in sequence and continuously. TC test was performed at $-40{\sim}125^{\circ}C$ and soak time 10 min for 1000 cycles. PTC test was applied by pulse power and full function conditions during 100 cycles. Combined stress test was tested in accordance with automotive company standard. Solder joint degradation was observed by optical microscopy and environment scanning electron microscopy (ESEM). In addition, to compare with deterioration of bond strength of quad flat package (QFP) and chip components, we have measured lead pull and shear strength. Based on the series test results, consequently, we have validated of series test method for lifetime and reliability of Pb-free solder joint in automotive electronics.