• 드라이브 ㆍ 컨트롤
• /
• 제19권2호
• /
• pp.36-44
• /
• 2022

Hydrogen energy as an alternative source of energy has been receiving tremendous support around the world, and research is being actively conducted accordingly. However, most of the studies focus on hydrogen storage tanks and only are few studies on interpreting the hydrogen filling system itself. In this study, with reference to SAE J2601, a hydrogen fueling protocol, a simulation model was developed that can confirm the behavior of the vehicle's internal tank during hydrogen fueling. With respect to factors such as fuel supply temperature, ambient temperature, and pressure increase rate, the developed model can check the change of temperature and pressure in the tank and the state of hydrogen charging during hydrogen fueling. The validity of the developed simulation model was confirmed by comparing the simulation results with the experimental results presented in SAE J2601.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.331-336
• /
• 2001

Theoretical approach was taken to the whole CNG refueling process. In particular, this study was focused on the prediction of flow rate at any given piping configuration of CNG system, in order that a simulation program for the CNG refueling system should be developed. The simulation result of refueling process was compared with experimental result obtained from various kinds of fueling configuration. The simulation results showed a satisfactory agreement within 10% errors in fueling time, fueling amount, and residual pressure. The developed program would be used a good engineering tools for estimating fueling performance for a any given CNG station.

• 한국진공학회지
• /
• 제16권6호
• /
• pp.489-495
• /
• 2007

KSTAR 토카막은 현재 주장치 조립을 완료하고 "최초 플라즈마" 발생과 시운전을 준비하고 있다. 이를 위해 설치되어 있는 연료주입계는 배기 덕트 반대 쪽 한 곳만 주입구로 사용하기 때문에 균일하고 신속한 입자공급이 어렵다. 시운전이 끝나고 기본운전 단계가 되면 단순한 플라즈마 생성이 아니라 일정한 고밀도 토카막플라즈마 상태를 일정시간 고르게 유지해야 하므로 공간적으로 균일한 입자공급과 플라즈마 밀도 변화에 따른 신속한 제어가 가능한 연료공급계로 개선되어야 한다. 이런 개선점을 찾는 작업의 일환으로 우선 D-형 진공용기 및 플라즈마 컬럼을 사각단면 토러스로 묘사하는 모델을 만들고 연료공급 위치와 플라즈마의 전리율 및 배기확률에 따라 공간적인 입자분포가 어떻게 바뀌는지 몬테카를로 계산을 통해 분석했다.

• 한국가스학회지
• /
• 제24권1호
• /
• pp.23-32
• /
• 2020

수소자동차용기에 높은 압력(70 MPa)의 수소를 빨리 완전 충전하는 것은 쉽지 않다. 그 이유는 줄-톰슨효과 등에 의해 발생하는 열로 인하여 용기내의 온도가 급속히 상승하기 때문이다. 미국의 SAE J2601, 일본의 JPEC-S 0003 같은 충전프로토콜이 제정되어 운영되고 있다. 그러나 이들 프로토콜에는 수많은 가정이 도입되어 내용이 너무 복잡하고 적용범위가 제한적이라는 문제가 있다. 이 연구는 완벽한 실시간 통신에 기반한 새로운 프로토콜을 개발하기 위해서 수행되었다. 이 연구에서는 수소충전 시뮬레이션 프로그램을 이용하여 압력상승률이 자동차용기내의 온도 및 압력 상승과 충전유속에 어떠한 영향을 미치는지 살펴보았다. 그 결과 압력상승률 결정 시 우선 고려하여야 할 매개변수는 자동차 용기의 온도라는 것을 알 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제34권5호
• /
• pp.447-455
• /
• 2023

SAE J2601, hydrogen fueling protocols, proposes two charging methods. The first is the table-based fueling protocol, and the second is the MC formula-based fueling protocol. Among them, MC formula-based fueling protocol calculates and supplies the target pressure and pressure ramp rate (PRR) using the pre-cooling temperature of the hydrogen and the physical parameters of the tank in the vehicle. The coefficient of the MC formula for deriving MC varies depending on the physical parameters of the tank in the vehicle. However, most studies use the MC coefficient derived from SAE J2601 as it is, despite the difference in the physical parameters of the tank applied to the study and the tank used to derive the MC coefficient from SAE J2601. In this study, the MC coefficient was derived by applying the hydrogen tank currently used, and the difference with the fueling performance using the MC coefficient proposed in SAE J2601 was verified. In addition, the difference was confirmed by comparing and analyzing the fueling performance of the table-based method currently used in hydrogen fueling stations and the MC formula-based method using MC coefficient derived in this study.

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.76-82
• /
• 2018

A test simulator is needed to develop a fuel quantity measurement system that takes into account the roll and pitch motion of the aircraft. In this paper, we develop a test simulator that consists of attitude simulation equipment, fueling equipment, and data storage equipment. The attitude simulation equipment simulates the aircraft attitude. It is manufactured to operate pitch angle and roll angle movement. The fueling equipment supplies fuel to the supplementary fuel tank. The data storage equipment collects and stores the measured data. We also develop an automation software that operates the test simulator and collects data automatically. The test simulator has been automated to prevent testers from being exposed to toxic fuel. Through automation software, the collection period is reduced by one quarter compared to manual collection. The developed fuel quantity measurement system is verified through the test simulator.

• 대한기계학회논문집B
• /
• 제33권4호
• /
• pp.255-263
• /
• 2009

The most concerning issue of these days is the energy crisis caused by increasing threat of dependence on imported oil and volatile market trend. Under these circumstances, the PHEV(plug-in hybrid electric vehicle) is drawing attention for the next generation's car which could give a chance to decrease the dependence on imported oil and reduce the environmental impact of vehicle. The fueling cost of PHEV, one of the core factor of decision about buying car, should be calculated in the circumstances of Korea to make sure that PHEV has competitive power in real market. The fuel cost saving of PHEV versus CV(conventional vehicle) is simulated and discussed in the condition of increasing gasoline cost, electricity rate, and city-gas rate. In conclusion, the PHEV60-FS shows the best economic feasibility when gasoline price goes up. The PHEV20 has the most stable economic feasibility as electricity rate increases. The fuel cell cogeneration system for RPG could be an alternative for charger of PHEV in the near future.

• 한국진공학회지
• /
• 제15권5호
• /
• pp.465-474
• /
• 2006

기체저장용기, 단순 개폐밸브 및 기체 공급 관으로 구성된 기체연료 주입계는 가장 간단하게 사전에 기체 도입유형을 정할 수 있다는 장점이 있다. 장치의 동작특성을 알아보기 위해 기체 흐름에 관한 일차원 동특성 방정식을 세우고 수치적으로 풀었다. 이 계산의 목적은 저장기체 압력, 저장용기 체적, 공급관의 굵기, 길이 따위의 기계적 요소들과 최대유량까지의 지연시간, 최대유량 값, 기체 펄스폭 따위의 기체 흐름의 유형을 결정하는 인자들 사이의 관계를 정립하려는 것이다.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.94-110
• /
• 1997

In the present study, a mean torque predictive model has been proposed and experimentally validated. It includes induction air mass model, fuel delivery model and mean production mode. Air induction and fuel delivery model considering dynamic behaviors of air induction and fuel delivery were proposed to predict the air-fuel ratio excursions under transient condition. Torque function model reflects thermal efficiency, volumetric efficiency, friction and effect of spark timing. In the spark timing model, knock limit and acceleration retard are included. Experiments were carried out to validate the simulation model for the step changes of throttle at constant engine speed. The results show reasonable agreements between simulation and experiment at fully warmed condition. Using this model, fueling strategies are varied with fast throttle open and it can predict air-fuel ratio excursion and IMEP.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.12-25
• /
• 2007

Numerical simulation of the natural gas steam reforming process for on-site hydrogen production in a $H_2$ fueling station was conducted on the basis of process material and heat balances. The effects of reforming parameters on the process efficiency of hydrogen production were investigated, and set-point values of each of the parameters to minimize the sizes of unit process equipments and to secure a stable operability of the reforming process were suggested. S/C ratio of the reforming reactants was found to be a crucial parameter in the reforming process mostly governing both the hydrogen production efficiency and the stable operability of the process. The operation of the process was regarded to be stable if the feed water(WR) as a reforming reactant could evaporate completely to dry steam through HRSG. The optimum S/C ratio was 3.0 where the process efficiency of hydrogen production was maximized and the stable operability of the process was secured. The optimum feed rates of natural gas(NGR) and WR as reforming reactants and natural gas(NGB) as a burner fuel were also determined for the hydrogen production rate of $27\;Nm^3/h$.