• 대한환경공학회지
• /
• 제37권8호
• /
• pp.458-464
• /
• 2015

본 연구에서는 사산화삼철과 활성탄을 발열체로 하여 벙커C유 오염토양에 마이크로파를 조사한 후 온도변화 양상 및 TPH 제거효율을 살펴보았다. 사산화삼철 및 활성탄 함유 오염토양에 100~500 Watt로 마이크로파를 조사하였을 때 승온율은 $1.4{\sim}1.6^{\circ}C/Watt$로 나타났다. 조사시간에 따른 온도의 변화는 활성탄보다 사산화삼철 함유토양에서 민감하게 나타났으며, 사산화삼철과 활성탄의 경우 발열체 함량이 각각 10% 이상과 25%에서 열탈착을 위한 충분한 온도가 확보될 수 있음을 관찰하였다. 사산화삼철은 평균 44.1%, 활성탄은 평균 89.4%의 TPH 제거 효율을 나타났으며, 벙커C유의 제거 양상은 활성탄이 함유되었을 때 사산화삼철 보다 고분자탄화수소의 휘발이 더욱 원활하게 진행되고 있음을 확인하였다.

• 수산해양기술연구
• /
• 제24권1호
• /
• pp.36-43
• /
• 1988

Boilers and diesel engines have many problems because their exhaust particles, i.e., soot have lots of bad influence on environment. And it's spray and flame have fundamentally axial symmetric shape. To investigate the relationship between fuel concentration distribution of spray and soot concentration distribution as well as temperature distribution of flame, we made a axial symmetric two phase spray-flame and analyzed the structure of is. The measuring method is the principle of the light extinction method for the spray-flame and onion peeling model is applied to analyze the radial distribution of fuel and soot concentration. The temperature of flame is measured by ø 0.4mm Pt-Pt.RH 3% thermocouple. The oils for the experiments are diesel oil and 10% water emulsified diesel oil. It was found that the soot concentration becomes higher as it comes near to the center of flame, and the fuel concentration does, too. And the soot concentration level of diesel oil is generally higher than that of the 10% water emulsified fuel. The maximum flame temperature of diesel oil is 1,17$0^{\circ}C$, however, 10% water emulsified diesel oil is 1,27$0^{\circ}C$.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.36-38
• /
• 2011

As the increase of the fuel oil price, the demand for saving of the ship running cost is growing. To meet the needs of the shipowners, the method for low load operation has been developed by engine licenser. As one of low load operation, the turbocharger cut-out system can be utilized flexibly both full and part load operation. It can be possible to optimize fuel consumption at both full and part load operation. Tests by engine licenser with 12K98MC engine have proven that the fuel oil consumption can be reduced approximately 5%. In this paper we will study the application of main engine turbocharger cut-out system onboard a vessel. One of four turbochargers with MAN Diesel & Turbo 12K98MC-C and 12K98ME-C engine is cut out with swing gate valve. The fuel oil consumption is measured during sea trial and engine shop test.

• Journal of Microbiology and Biotechnology
• /
• 제25권4호
• /
• pp.459-463
• /
• 2015

This study evaluated the microbial conversion of coconut oil waste, a major agro-residue in tropical countries, into single cell oil (SCO) feedstock for biodiesel production. Copra cake was used as a low-cost renewable substrate without any prior chemical or enzymatic pretreatment for submerged growth of an oleaginous tropical mangrove fungus, Aspergillus terreus IBB M1. The SCO extracted from fermented biomass was converted into fatty acid methyl esters (FAMEs) by transesterification and evaluated on the basis of fatty acid profiles and key fuel properties for biodiesel. The fungus produced a biomass (8.2 g/l) yielding 257 mg/g copra cake SCO with ~98% FAMEs. The FAMEs were mainly composed of saturated methyl esters (61.2%) of medium-chain fatty acids (C12-C18) with methyl oleate (C18:1; 16.57%) and methyl linoleate (C18:2; 19.97%) making up the unsaturated content. A higher content of both saturated FAMEs and methyl oleate along with the absence of polyunsaturated FAMEs with ≥4 double bonds is expected to impart good fuel quality. This was evident from the predicted and experimentally determined key fuel properties of FAMEs (density, kinematic viscosity, iodine value, acid number, cetane number), which were in accordance with the international (ASTM D6751, EN 14214) and national (IS 15607) biodiesel standards, suggesting their suitability as a biodiesel fuel. The low cost, renewable nature, and easy availability of copra cake, its conversion into SCO without any thermochemical pretreatment, and pelleted fungal growth facilitating easier downstream processing by simple filtration make this process cost effective and environmentally favorable.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1421-1432
• /
• 2018

본 연구에서는 바이오매스로서 코코넛 폐기물을 $600^{\circ}C$에서 열분해하여 생성된 수상오일(water soluble oil)을 얻었다. 선박유로 사용되는 MDO(Marine Diesel Oil)와 바이오매스로서 코코넛 폐기물을 열분해하여 생성된 수상오일을 MDO에 15~20% 까지 혼합 후 유화시켜 제조된 바이오에멀젼 연료의 연소 특성에 대하여 연구 하였다. 엔진 배출가스 및 온도, 출력을 측정하기 위하여 엔진 다이나모메터를 사용하였다. 바이오에멀젼 연료는 수분이 함유되어 있어서 연소실내의 기화잠열을 빼앗아가 배출가스의 온도를 낮춰주는 것으로 나타났다. 바이오에멀젼 연료에 함유된 수분이 연소실내에서 미세폭발을 일으켜 연료를 잘게 쪼개어 주어 매연을 감소시키는 것으로 나타났다. 바이오에멀젼 연료의 사용으로 연소실내의 온도 감소는 질소산화물 배출을 저감하는 것으로 나타났다. 바이오오일 함유량이 증가 하면 수분함량도 증가하여 전체 발열량이 줄어들게 된다. 따라서 출력이 바이오에멀젼 연료 사용량에 비례하여 감소하는 특성을 나타내었다. 선박용 연료로 사용되는 중질유는 매연과 질소산화물을 많이 배출한다. 선박용 연료로 바이오에멀젼 연료를 사용하면 매연과 질소산화물 배출을 줄여줄 수 있을 것으로 기대된다.

• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.481-488
• /
• 2000

This study was initiated in order to find alternative fuel substituting for light oil the most common fuel for heating greenhouse. The tire oil used in this research was produced by pyrolysis process, one of the final products besides steel string and carbon black in which waste tires as a form of chopped pieces broken by shredding machine are heated up to 200~30$0^{\circ}C$ with maximum restraining of oxygen supply. In order to justify light oil equivalent qualities in tire oil combustion characteristics were defined in the way of comparing kinetic viscosities in the wide range of temperature flame sizes and exhaust gas components in the various combustion conditions. We found that kinetic viscosity of tire oil was lower than light oil by 1 to 2 cSt in the temperature range showing better flowing mobility in the fuel line of the burner and no significant difference in flame size between the two oils in the all combustion treatments. However much more NO and SO$_2$ were detected from the exhaust gases of tire oil than light oil combustions. In fact tire oil contains more nitrogen and total sulfur, by 25 times and 40 times respectively than light oil according to the composition analysis. Tolerable limit for SO$_2$discharge amount defined by the national air pollution standards is under 540ppm so tire oil combustion satisfies the requirement though. It is desirable if sulfur and nitrogen filtering process shall be added in the tire oil production line. Except the exhaust gas components all greenhouse heating qualities of tire oil including hot air temperature are very identical to those of light oil.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.115-115
• /
• 2011

Biodiesel (BD) was made from animal-fats reacting with methanol and potassium hydroxide in the laboratory. The biodiesel made in the laboratory was sent to K-petro, the government agency, to inspect the quality of animal-fats biodiesel, of which generally the quality was acceptable for heating oil for agricultural hot air heater. Kinematic viscosity and calorific values of the biodiesels were measured. BD20(K), kerosene based biodiesel, showed 18cSt at $-20^{\circ}C$. It seems that BD100 can not be suitable for heating fuel under some temperature. As BD content increased calorific value decreased, up to 40,000J/g for 100% BD, while light oil calorific value was 45,567J/g, showing difference of 5,567J/g, about 12% difference. Several different fuels, BD20, BD50, BD100 and light oil, were prepared and tested for fuel combustion qualities for agricultural hot air heater and their combustion performances were compared and analyzed. Flame dimensions of biodiesels and light oil were almost same shape at the same combustion condition in the burner of the hot air heater. Generally $CO_2$ amounts of BDs are greater than light oil. But,the differences are so small that it is hard to tell there was significant difference existed between the BDs combustion and light oil.

• 동력기계공학회지
• /
• 제12권2호
• /
• pp.12-17
• /
• 2008

Biodiesel fuel(BDF) which is easily produced from vegetable oils such as soybean oil and rice bran oil can be effectively used as an alternative fuel in diesel engine. But biodiesel fuel can affect the performance and emissions in diesel engine because it has different chemical and physical properties from diesel fuel. To investigate the combustion characteristics of biodiesel fuel as an alternative fuel for D.I. diesel engine, the experiments were carried out at the three-cylinder, four stroke D.I. diesel engine with T/C. Experimental parameters adopted a conventional diesel fuel and a blend of biodiesel fuel derived from soybean. As a result of experiments in a test engine, BSFC with blend of BDF resulted in higher than with diesel fuel. The ignition delay decreased with blend of BDF than with diesel fuel.

• Computers and Concrete
• /
• 제10권4호
• /
• pp.349-360
• /
• 2012

In this paper, compressive strength, water permeability and abrasion resistance of concretes containing high volume fine fly ash (FFA) and fine ground palm oil fuel ash (GPA) were studied. Portland cement type I was replaced with FFA and GPA at dosages up to 70% by weight of binder. Ground river sand (GRS) was also used to replace Portland cement in order to indicate the level of filler effect. Results indicated that FFA was slightly more reactive than GPA. The replacement of 40-70% of FFA produced concretes with compressive strength, permeability and abrasion resistance comparable to those of normal concretes. The incorporation of GPA slightly reduced the performances of concretes as compared to those of FFA concretes. The reduction of Portland cement was partly compensated by the increase in pozzolanic activity of the fine fly ash and palm oil fuel ash and thus enabled the large replacement levels.

• 해양환경안전학회지
• /
• 제18권6호
• /
• pp.584-590
• /
• 2012

본 연구에서는 고정자와 회전자에 의해 발생하는 전단력(Shearing force)을 이용한 선박용 연료유 균질기(Homogenizer) 개발에 관한 연구를 수행하였다. 균질기의 균질화 및 미립화 정도에 대한 성능을 조사하기 위하여 IFO 380 cSt Bunker-C 시료에 전처리(Pre-treatment)를 시행하였다. 전처리한 시료의 슬러지(Sludge) 저감 효과를 확인하기 위하여 유청정기(Oil purifier)를 이용하였다. 실험결과 균질기로 전처리한 시료에서 슬러지양이 약 13 % 감소하는 것을 확인하였다. 또한, 전처리 후 유청정한 시료를 실제 보일러 시스템에서 연소시켜 CO가 감소하는 연소특성 경향을 확인하였다. 이와 같은 결과를 통해 개발된 선박용 연료유 균질기를 실선에 적용할 경우 연료비 및 운항비용 절감 효과가 있을 것으로 판단된다.