• 제목/요약/키워드: fuel filter

검색결과 225건 처리시간 0.03초

LPG 펌프에서 필터 종류에 따른 펌프 토출성능에 대한 연구 (Performance of Blowoff Flow for a LPG Fuel Pump with Various Fuel Filters)

  • 이석환;박철웅;김창업
    • 한국가스학회지
    • /
    • 제13권4호
    • /
    • pp.1-7
    • /
    • 2009
  • 최근 연료경제성 및 강화되는 배출가스 규제를 만족하기 위하여 대체연료의 하나인 LPG에 대한 수요가 증가하고 있다. 현재 LPG 차량에 적용되고 있는 제3세대 LPG 연료공급방식인 LPLi(Liquid Phase LPG Injection) 시스템은 가솔린 차량과 비교하여 배출가스는 적게 배출하면서 동등한 출력을 낼 수 있게 하는 핵심 기술이다. LPG 연료를 고압의 액상 상태로 공급하기 위해서는 LPG 펌프가 필요하다. 연료펌프의 성능을 저하 시킬 수 있는 연료 내 불순물을 제거하기 위하여 연료펌프에는 연료필터가 장착되어 있으며 장착되는 연료필터의 종류에 따라서 연료펌프의 성능도 변하게 된다. 본 연구에서는 임펠라 방식을 채택한 LPG 연료펌프에서 극세사, 이중메쉬, 외장형 필터의 세 가지 필터에서 부하별 토출성능 및 효율을 파악하였으며 온도 변화에 따른 펌프유량 변화를 측정하였다.

  • PDF

터보프롭 엔진 연료필터 오염 원인 탐구 (Investigation of Fuel Filter Contamination for Turboprop Engine)

  • 이형원;조하나;이충렬
    • 한국추진공학회지
    • /
    • 제23권6호
    • /
    • pp.87-94
    • /
    • 2019
  • 본 논문에서는 P&WC 사 PT6A-67A 엔진의 연료 필터 오염에 대한 원인 탐구를 수행했다. 관련하여 PT6A-67A 엔진 연료 필터 오염 개요와 엔진 공급라인 구성에 대해서 명시했다. 다음으로, 분석방법을 공급 연료 성분 분석과 고형 침전물 분석(EDX, TGA, 광학현미경)으로 분류하여 비교분석했다. 결과들을 종합하면, 검출된 주요 성분은 연료 탱크 실런트의 황 성분이었다. 이 결과들의 후속조치로서 P&WC와 국방과학연구소는 엔진 운용에 있어서 엔진 연료 필터 주기 점검 및 연료 탱크 세척을 수행할 예정이다.

다순환 여과시험에 의한 자동차용 연료필터의 성능 평가 (Performance Evaluation of an Automotive Fuel Filter by Multi-Pass Filtration Test)

  • 이재천;장지현
    • 한국자동차공학회논문집
    • /
    • 제10권6호
    • /
    • pp.219-226
    • /
    • 2002
  • Filtration performance of an automotive fuel filter was evaluated based on the theory of Beta ratio. This study also introduced the fuel components' contamination performance test stand incorporating the multi-pass filtration test circuit. The theoretical basis of multi-pass test and test procedure were described in detail. The specification of commercial fuel filter currently available was just the maximum pressure drop across the filter assembly and the holding capacity of contaminants. However, test results revealed that the fuel filter tested could not maintain consistent Beta ratio, that is filtration efficiency, although it had the holding capacity close to the specification. Hence the Beta ratio should be specified in service life. The results also showed that filtration system model should be refined including desorption ratio to estimate the variable Beta ratio in the test.

가류 촉진제 블루밍에 의한 전투기 연료필터의 막힘 (Blocking of Fuel Filter in Aircraft by an Accelerator Blooming)

  • 김익식;황영하;손경숙;이중훈;손병훈
    • Elastomers and Composites
    • /
    • 제49권1호
    • /
    • pp.1-12
    • /
    • 2014
  • 전투기 연료필터의 막힘은 조종사 생명과 전투기의 손실에 큰 영향을 줄 수 있다. 따라서 결함 연구는 사고를 미연에 방지하는데 매우 중요하다. 전투기 연료필터는 제트 연료에 포함된 다양한 불순물을 여과하는 중요한 기능을 수행한다. 연료 필터는 시간당 1,330 파운드의 유속으로 공급되는 제트 연료에 함유된 10 ${\mu}m$ 크기 이하의 불순물을 여과한다. 필터는 운영시간 기준 500 시간마다 교체되어야 한다. 그러나 500 시간이 도달하기 훨씬 전에 연료 필터의 막힘 현상으로 경고등이 켜지고 있다. 이와 같은 유사한 결함이 최근에 반복적으로 발생하고 있다. 그러므로, 이 연구에서는 전투기의 연료 필터 막힘에 대한 원인을 FT-IR microcopy, FE-SEM/EDS, 총 황함량 분석기와 같은 다양한 분석기술을 이용하여 조사하였다. 결론적으로, 연료 필터를 막히게 한 물질은 내부 연료 탱크용 실란트에서 기인한 가류 촉진제로 확인되었다. 그리고 연료 탱크내에서 가류 촉진제 블루밍 현상에 의해 연료필터를 막히게 하는 물질의 형성에 대한 메커니즘을 제시하였다.

통합연료필터의 저온유동성 시험장치 핵심기술개발 (Core Technology Development of Low Temperature Fluidity Test System with Composited Fuel Filter)

  • 윤석창;조상;윤달환
    • 전기전자학회논문지
    • /
    • 제18권3호
    • /
    • pp.420-426
    • /
    • 2014
  • 본 연구에서는 저온유동성 성능검사 시스템 구현을 통해 디젤 차량용 통합형 연료필터의 성능을 평가한다. 저온유동성시험 장치의 시험조건은 경유(또는 등유)를 사용하고, 상온, -20 및 $-30^{\circ}C$ 에서 경유공급압력 $3.4kgf/cm^2$, 연료공급량 60 l/H, 설정전류 30 A 및 전압은 $13V_{dc}$를 사용한다. 시료시험으로 통합필터를 지그에 장착하고, 경유(또는 등유)를 일정압력과 유량으로 설정하여 챔버 탱크와 필터에 채운 후, 설정시간 동안 설정온도로 냉각한 후, 필터 전후에 따라 유압과 시동시간, 히터의 소모전류 및 전력을 측정한다.

튜브형 박용 자동역세 연료유 필터 내부의 유동해석 (Flow Analysis of the Tube Type Marine Auto-Backwashing Fuel Oil Filter)

  • 양장식;김봉환;박영범
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제33권4호
    • /
    • pp.578-587
    • /
    • 2009
  • In this paper, the characteristics of incompressible flow in a tube type marine fuel oil filter have been investigated. Fluent program has been used to obtain the solutions for the problems of three-dimensional, turbulent fuel oil flow in a filtering system. The inlet flow field is assumed to be uniform. The velocity and pressure distributions were obtained using Darcy's law. The increase of inlet velocity for cleaning fuel oil may cause some problems like vibration of the filter element. It was also required to consider the distribution of cleaning velocity because the worst distribution of cleaning velocity may cause the local insufficient cleaning effect and furthermore the effective filtration area can be reduced. The simulated results show that the computer code can be successfully applied for simulation of the complex base oil flow through the porous media. This paper could be applied to the design of auto-backwashing filtering system as design factor.

연료전지용 PCS의 출력 전류 리플 개선을 위한 노치 필터 설계 (The Notch Filter Design for Mitigation Current Ripple of Fuel cell-PCS)

  • 김승민;박봉희;최주엽;최익;이상철;이동하
    • 한국태양에너지학회 논문집
    • /
    • 제32권6호
    • /
    • pp.106-112
    • /
    • 2012
  • As a fuel cell converts the chemical energy of the fuel cell into electrical energy by electrochemical reaction, the fuel cell system is uniquely integrated technique including fuel processor, fuel cell stack, power conditioning system. The residential fuel cell-PCS(Power Conditioning System) needs to convert efficiently the DC current produced by the fuel cell into AC current using single-phase DC-AC inverter. A single-phase DC-AC inverter has naturally low frequency ripple which is twice frequency of the output current. This low frequency(120Hz) ripple reduces the efficiency of the fuel cell. This paper presents notch filter with IP voltage controller to reject specific 120Hz current ripple in single-phase inverter. The notch filter is designed that suppress just only specific frequency component and no phase delay. Finally, the proposed notch filter design method has been verified with computer simulation and experimentation.

온도 및 압력 측정에 기반을 둔 디젤 차량의 연료필터 분석 시스템 (Analyzing System of Fuel Filter Based on Temperature and Pressure Measurement for Diesel Cars)

  • 장용성;이보희;윤달환;김진걸;손병민
    • 전기전자학회논문지
    • /
    • 제18권3호
    • /
    • pp.383-391
    • /
    • 2014
  • 본 논문에서는 겨울철 저온환경에서 디젤 엔진의 연료필터를 검사하기 위한 온도, 압력 및 유량 분석 시스템을 제안하였다. 디젤엔진의 연료인 경유는 특정 온도 이하로 내려가면 파라핀과 같은 반고체 상태인 왁싱(Waxing)물질을 형성하여 유동성이 낮아지기 때문에 엔진 시동이 원활하지 않다. 그래서 이러한 문제점을 해결하기 위해서 블록 히터를 내장하게 된다. 그리고 연료필터의 성능을 측정하기 위해서는 극저온 하에서 엔진 시동 시부터 온도, 압력 및 유량을 분석할 수 있는 시스템이 요구된다. 본 논문에서는 제작된 시스템을 이용하여 연료필터 주변의 성능에 관계된 물리량을 측정하였으며 이를 분석하였다. 또한 측정된 데이터는 임베디드 시스템의 웹서버를 이용하여 원격 네트워크로 전송하였고 원격에서 사용자들이 웹브라우저를 이용하여 운전 상태를 용이하게 파악할 수 있게 설계하였다. 설계된 시스템을 검증하기 위하여 제작된 소형 실험 챔버에 설치하고 상온 및 극저온 상황에서 실험하여 연료필터 입출력 측 연료의 온도, 압력, 유량 데이터를 얻을 수 있었으며, 연료히터의 동작 시 연료의 흐름이 개선되는 것을 알 수 있었다.

디젤차량용 통합연료히터의 저온유동성 성능평가 (Low Temperature Fluidity Performance Evaluation of Composited Package Fuel Heater for Diesel Cars)

  • 이정화;박형원;이웅수;이영재;이보희;윤달환
    • 전기전자학회논문지
    • /
    • 제18권1호
    • /
    • pp.152-158
    • /
    • 2014
  • 본 연구에서는 저온유동성 성능검사 시스템 구현을 통해 디젤 차량용 통합형 연료히터의 성능을 평가한다. 저온 유동성 시험장치에서 $+20{\sim}-30^{\circ}C$ 온도범위에 따라 분리형과 통합형 연료히터 성능을 비교하고, 필터 전후에 따라 유압과 시동시간, 히터의 소모전력을 측정한다. 이때 다양한 종류의 필터면적을 사용함으로써 통합형 연료히터와 분리형을 비교한 결과 시동 시간이 23% 향상되었고, 저온시동성능은 19% 정도 향상된다.

An Experimental Investigation on the Contamination Sensitivity of an Automotive Fuel Pump

  • Lee Jae-Cheon;Shin Hyun-Myng
    • International Journal of Precision Engineering and Manufacturing
    • /
    • 제6권3호
    • /
    • pp.51-55
    • /
    • 2005
  • This study addresses the contamination sensitivity test of a typical fuel pump for an automotive vehicle. The objective of the study is to find the contamination sensitivity coefficient of a fuel pump on specific contaminant particle sizes so that an optimal fuel filter could be selected. To achieve the objective, the degradation of discharge flow rate of the fuel pump is measured under the experiments of various contaminants size ranges of ISO test dust up to $80\;{\mu}m$. The fundamental theory of contamination sensitivity is introduced and the contamination sensitivity coefficients are estimated using the experimental data. Maximum contamination sensitivity coefficient of $5\chi\;10^{-6}\;L/min{\cdot}Ea$ is found in the contaminant size range of $40\;{\mu}m\~50\;{\mu}m$. The magnified picture of the surface of vane disc reveals that the abrasive wear is the principal cause of discharge flow rate degradation. Hence, this study reveals that a high efficiency filter for contaminant particles especially in the size range of $30\;{\mu}m\~70\;{\mu}m$ especially should be used to maintain the service life of the fuel filter.