• 신재생에너지
• /
• 제7권3호
• /
• pp.59-66
• /
• 2011

Recently, an UAV using green energy for propulsion has been developed due to exhaustion of fossil fuel. This aircraft runs on electric motors rather than internal combustion engines, with electricity coming from fuel cells, solar cells, ultracapacitors, and/or batteries. Especially solar cells are installed in HALE UAV and flight tests are performed in the stratosphere. Although the solar powered UAV has the advantage of zero emission, its energy conversion efficiency is low and operation time is limited. Therefore, the solar powered UAV has been designed to operate with the secondary battery obtaining flexibility of energy management. In this study, we suggest the new operational concept of the solar powered UAV using directed-energy rayed from the surface of earth to UAV. An UAV is able to secure additional power through attaching solar cell to the lower surface of elevator. As a result, the additional energy supplied by directed-energy can improve the energy management and operational flexibility of the solar powered UAV.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.505-506
• /
• 2008

The direct methanol fuel cell (DMFC) is a promising power source for portable applications due to many advantages such as simple construction, compact design, high energy density, and relatively high energy-conversion efficiency. In this work, an electrochemical methanol sensor for monitoring the methanol concentration in direct methanol fuel cells was fabricated using a thin composite nafion membrane as the electrolyte. We have analyzed the I-V characteristic of the fabricated methanol sensor as a function of methanol concentration, catalyst electrode and platinum(Pt) dot.

• Journal of Mechanical Science and Technology
• /
• 제16권2호
• /
• pp.270-278
• /
• 2002

In order to reduce the exhaust emissions of a spark ignition engine, it is important not only to improve the catalyst conversion efficiency, but also to directly reduce the engine-out exhaust emissions during a cold starting of the engine and warm up periods. The purpose of this study is to evaluate feasibility of a glow plug for an early fuel evaporator. In order to promote atomization, gasoline is injected on the glow plug with room temperature(20$\^{C}$) and high temperature(250$\^{C}$). To analyze the spray behavior characteristics, a PMAS is used to measure the SMD and the dropsize distribution of an impinging spray and a free spray. Results show that the evaporation rate of the impinging spray on the high temperature surface of the glow plug was higher than that of the free spray on the room temperature surface.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.132.1-132.1
• /
• 2010

Anode off-gas of high temperature fuel cells such as MCFC still contain combustible components such as hydrogen, carbon monoxide and hydrocarbon. Thus, it's very important to fully burn anode off-gas and use the generated heat in order to increase system efficiency. In the present study, catalytic combustors have been applied to high temperature MCFC system so that the combustion of anode-off gas can be boosted up. Since the performance of catalytic combustor directly depends on the combustion catalyst, this study has been focused on the experimental investigation on the combustion characteristics of multiple commercial catalysts having different structures and compositions. In order to determine the design conditions of the catalytic combustor, parameters such as inlet temperature, space velocity and excess air ratio have been varied and optimized for combustor design. Results show that $H_2$ in off-gas assists $CH_4$ combustion in a way that it decreases minimum inlet temperature limit and increases maximum space velocity while keeping high fuel conversion efficiency.

• 한국가스학회지
• /
• 제17권6호
• /
• pp.27-32
• /
• 2013

바이오가스, 매립가스와 같은 신재생 가스 연료는 Biomass, 유기성 폐기물 등으로부터 얻을 수 있기 때문에 대기 중의 이산화탄소를 증가시키지 않고 재순환시키는 탄소중립적인 특성이 있어 지구온난화에 대응할 수 있는 장점이 있다. 따라서 다량의 불활성가스로 인한 저발열량, 원료 및 공정에 따른 연료조성 변화 등의 단점에도 불구하고 이를 엔진에 적용하여 에너지를 생산하고자 하는 노력이 계속되어왔다. 이중에서도 연료조성의 변화는 엔진 성능에 큰 영향을 미칠 수 있기 때문에 이에 대한 연구가 필요한 실정이다. 따라서 이번 연구에서는 신재생가스연료에 포함된 불활성가스의 양을 변화시켜 연료 조성 변화를 모사하고 이를 엔진의 연료로 사용함으로써 연료 조성의 변화가 엔진 성능 및 배기배출 특성에 주는 영향을 파악하였다. 또한 엔진 효율 및 배기 성능을 향상시키기 위한 방안에 하나로 보다 긴 전극을 갖는 스파크 플러그를 적용하였으며 그 결과를 기존의 Base 스파크 플러그 시험 결과와 비교하였다.

• 공업화학
• /
• 제20권2호
• /
• pp.213-217
• /
• 2009

폐수처리와 동시에 전기를 생산할 수 있는 새로운 대체 에너지 기술로 주목받고 있는 미생물 연료전지(microbial fuel cell, MFC)는 혐기성 조건의 산화전극(anode)에서 미생물에 의한 촉매작용을 통해 유기물질을 분해하면서 화학에너지를 전기에너지로 전환시키는 장치이다. 본 연구에서는 MFC의 성능을 파악하기 위하여 도시하수를 사용하여 폐수처리 효율과 전기생산 특성을 평가하였다. 도시하수에 탄소원으로서 acetate를 주입하였을 때 COD 제거율은 75.7%에서 88.2%로 증가하였으며 전압은 0.22 V에서 0.4 V까지 급격하게 상승하였다. 다양한 외부저항 하에서 전기생산에 미치는 산화전극과 환원전극(cathode) 사이의 전극 거리에 대한 영향 및 산화전극의 표면적에 대한 영향을 조사하였다. 최고 전력밀도는 $610mW/m^2$이었으며, 전극간 거리가 가깝고 산화전극의 표면적이 작을수록 전기발생에 효과적임을 알 수 있었다.

• 전기화학회지
• /
• 제19권2호
• /
• pp.39-44
• /
• 2016

연료전지에서 산소 환원 반응 (ORR)은 전체 반응에서 지배적인 역할을 한다. 또한 서로 다른 물질로 이루어진 막과 바인더 간의 낮은 호환성은 연료전지 효율을 크게 감소시킨다. 이러한 두 가지 문제점을 고려하여, 본 연구에서는 기존의 일반적인 Biphenol 대신 입체적 구조를 갖는 9,9_Bis(4-hydroxyphenyl) fluorine를 이용한 고분자를 합성하여 각각의 전극 바인더를 제조하였고, 이를 이용하여 각각의 나피온 막과 탄화수소 막 위에 스프레이 기법으로 MEA를 제조하여 전기화학적 성능 평가를 진행하였다. 그 결과 전류-전압 곡선에서의 0.6 V의 성능이 두 종류의 다른 막을 적용 했을 때 큰 차이를 보이지 않았으며, 탄화 수소 막의 타펠 기울기의 정도가 나피온 막에 비해 현저히 낮았다. 이를 통해 본 연구에서 적용된 아이오노머 바인더가 연료 전지성능 향상에 더 기여할 수 있을 것으로 판단 된다.

• 한국환경보건학회지
• /
• 제39권5호
• /
• pp.474-481
• /
• 2013

Objectives: This study was conducted to investigate the application of microbial fuel cells (MFCs) to the wastewater treatment systems employed in the Living Building Challenge. Methods: I reviewed a range of information on decentralized wastewater treatment technologies such as composting toilets, constructed wetlands, recirculating biofilters, membrane bioreactors, and MFCs. Results: The Living Building Challenge is a set of standards to make buildings more eco-friendly using renewable resources and self-treating water systems. Although there are various decentralized wastewater treatment technologies available, MFCs have been considered an attractive future option for a decentralized system as used in the Living Building Challenge. MFCs can directly convert substrate energy to electricity with high conversion efficiency at ambient and even at low temperatures. MFCs do not require energy input for aeration if using open-air cathodes. Moreover, MFCs have the potential for widespread application in locations lacking water and electrical infrastructure Conclusions: This paper demonstrated the feasibility of MFCs as a novel decentralized wastewater treatment system employed in the Living Building Challenge.

• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.7-14
• /
• 2002

In order to reduce exhaust omissions of spark ignition engine, it is important not only to improve catalyst conversion efficiency but also to directly reduce engine out exhaust emissions, during cold starting and warm up process. Therefore many researchers have been attracted to develop an early fuel evaporator(EFE) by Introducing a ceramic heater fur a solution of engine out exhaust emissions in SI engine. But, the performance of the EFE in MPI engine to reduce the exhaust emissions and to improve the cold startability has not been clarified yet. The purpose of this study is to evaluate the feasibility of a glow plug far EFE. Impinging spray using heated and unheated glow plug helps the vaporization of the fuel and heat up the three way catalyst sufficiently. The amount of CO, and UHC is reduced overall. The amount of NOx is higher at the initial stage, but become lower as time goes on than without glow plug.

• 대한기계학회논문집B
• /
• 제31권3호
• /
• pp.234-241
• /
• 2007

The regulations for hydrocarbon emission from vehicles have become much more stringent in recent years. These more stringent regulations request vehicle manufacturers to develop the advanced exhaust system for reducing exhaust emissions. The exhaust emissions has many sources in vehicle. In order to investigate the characteristics of hydrocarbon(HC) in the exhaust manifold, concentrations of individual HC species were measured in exhaust process. Using sampling valve, the light hydrocarbon emissions were captured in the exhaust manifold(catalyst before and after) and analyzed from LPLi engine exhaust manifold(catalyst before and after) using different fuel properties. Then exhaust samples were measured by gas chromatography(GC) and exhaust gas analyzer. Catalyst conversion efficiency for fuel properties of Butane 100% was better than Propane 100%. Start delay of LPLi engine was observed as increment of propane contents in LPG fuels.