• Korean Membrane Journal
• /
• v.10 no.1
• /
• pp.26-32
• /
• 2008

The Gongji stream water of Chuncheon city was filtrated by 2 kinds of tubular alumina ceramic MF membranes with periodic $N_2$-back-flushing. $N_2$-back-flushing time (BT) was changed in $0{\sim}50$ sec at fixed filtration time (FT), or back-flushing period, of 4 min for NCMT-5231 membrane ($0.05\;{\mu}m$). Then, FT was changed in $0{\sim}32$ min at fixed BT of 40 sec for NCMT-7231 $0.1{\mu}m)$). In the viewpoints of total permeate volume ($V_T$), dimensionless permeate flux ($J/J_0$) and resistance of membrane fouling ($R_f$), the optimal $N_2$-BT was 50 sec, which was the longest BT, at 4 min FT for NCMT-5231. It means the longest BT was the most effective to minimize the membrane fouling, and we could acquire the most $V_T$. But the optimal FT for NCMT-7231 was 16 min in the viewpoint of $V_T$, and was 8 min in the viewpoints of $J/J_0$ and $R_f$ at fixed BT of 40 sec. The rejection rates were excellent as $80.6{\sim}96.6\;%$ for turbidity, $35.2{\sim}58.4%$ for $NH_3$-N, $16.3{\sim}45.2%$ for T-P and $16.3{\sim}45.2%$ for $COD_{Mn}$. However, the rejection rate of T-N was very low as $2.7{\sim}13.4%$ and it of TDS below 6.1%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.548-556
• /
• 2013

A tapered production tubing with two different inner diameters has been suggested to increase production rates. In this research, various tapered tubing combinations are taken into account and possible tubing combinations are proposed to satisfy each objective. In previous studies, production enhancement was the main goal. However, this research also considers flow stability by analyzing tubing pressure traverse, liquid holdup, and operating conditions. For a reservoir assumed in this research, a tapered tubing of, 4.5 inch inner diameter(ID) and 2000 ft in length in the lower part and 5.5 inch ID and 8000 ft in the upper part, shows the highest net present value. Compared to a mono tubing, tapered tubings enable various tubing designs because they have smaller differences in frictional pressure loss. It is important to maintain low liquid holdup to prevent liquid loading. Smaller ID of tapered tubing in the lower part enables to achieve the object. In conclusion, it is identified that various tubing designs are achievable from the analyses of overall production operations depending on purposes specified.

• The KIPS Transactions:PartB
• /
• v.10B no.3
• /
• pp.347-358
• /
• 2003

VSField-associated term is a single or compound word whose terms occur in any document, and which makes it possible to recognize a field of text by using common knowledge of human. For example, human recognizes the field of document such as or , a field name of text, when she encounters a word 'Pitcher' or 'election', respectively We Proposes an efficient construction method of field-associated terms (FTs) for specializing field to decide a field of text. We could fix document classification scheme from well-classified document database or corpus. Considering focus field we discuss levels and stability ranks of field-associated terms. To construct a balanced FT collection, we construct a single FTs. From the collections we could automatically construct FT's levels, and stability ranks. We propose a new extraction algorithms of FT's for document classification by using FT's concentration rate, its occurrence frequencies.

• Textile Coloration and Finishing
• /
• v.15 no.4
• /
• pp.24-31
• /
• 2003

In this research, we applied FT-IR spectroscopy to study the hydrolysis of the ester-crosslinking formed by various polycarboxylic acids on the cotton fabric. We observed the following; (1) the ester-crosslinking is less durable to hydrolysis than ether-crosslinking under all conditions; (2) the ester-crosslinking formed by polycarboxylic acids having more than three carboxyl groups, such as butanetetracarboxylic acid (BTCA), are substantially more durable to hydrolysis than the acids having two or three carboxyl groups, such as maleic and citric acid; (3) alkaline conditions drastically accelerate the hydrolysis of both urea- and ester-crosslinking; and (4) the ester-crosslinking formed by poly(maleic acid) is more resistant to hydrolysis at alkaline conditions than BTCA. (5) polycarboxylic acid molecules were removed from the fabric at same rate as the hydrolysis of the ester linkage. FT-IR spectroscopy has proved to be a useful analytical technique for evaluating the hydrolysis of the crosslinked cotton fabric.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1996.04a
• /
• pp.276-276
• /
• 1996

합성한 BR-8702-2의 시험결과 원소분석에서는 이론치와 실험치가 잘 일치하였고, 구조확인을 위한 FT-IR 및 FT-NMR(H$^1$)등의 시험에서도 구조와 일치하는 결과치를 나타내었다. 합성물질의 정량법을 HPLC 및 구성원소인 P와 N을 이용한 정량법에서도 유의성있는 결과를 얻을 수 있었다. 또한 분말상태인 이 물질의 안정성은 고온 고습하에서도 양호하였으며, 각종 완충수용액에서 pH가 분해에 미치는 영향을 pH-rate profile로 나타낸 결과 pH7, 8, 9에서 안정하였고 pH8에서 k=1.3$\times$$10^{-4}$day으로 가장 안정하여 shelf life는 807일이었다. 광에 대해서도 k=5.8$\times$$10^{-4}$day로 매우 안정하였다.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.232-237
• /
• 2010

Fault rate of RCD is increasing due to deterioration and long period usage in domestic. According to Korean standards, the RCDs are installed in panel boards. When RCDs are installed at outdoor, the RCDs must be protected from uv, water etc. by using the housing. However, many RCDs are exposed to the external environment. As a results, many RCDs have malfunctions so that cause the electrical accidents. The RCDs manufactured by four makes were used as the sample to weathering test. Futhermore, those were analyzed the ingredients of RCD'S using SEM, EDX and FT-IR/TAR before and after weathering test.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.2
• /
• pp.27-34
• /
• 2008

Recently, owing to the development of industry and improvement of building techniques, concrete structures are becoming larger and higher. This study was performed to analyze hydration reation properties of concrete with binders and admixtures, such as OPC, low heat cement, belite rich cement, slag powder, lime powder and fly ash. To investigate effects of PC type superplasticizer on the hydration, experiments involving FT-IR, XRD, DSC, SEM were analyzed at the curing age 1day, 3days and 28days. The hydration reaction rate of OPC concrete slightly delayed at the curing age 1day, blast furnace slag powder and fly ash were more effective. BRC and LHC concretes can be used for concrete structures in winter season.

• Polymer(Korea)
• /
• v.25 no.6
• /
• pp.848-854
• /
• 2001

The crystallization behavior of poly (ethylene terephthalate) (PET) /ethylene-methyl acrylate-glycidyl methacrylate copolymer (E-MeA-GMA) blend was studied. The extent of reaction and the reaction rate between PET and E-MeA-GMA were measured with torque rheometer, FT-IR and SEM. The effects of the grafting reaction on the crystallization behavior were investigated with DSC and time-resolved light scattering (TR-LS) techniques. The morphological change at the lamellar level was also examined by using a small angle X-ray scattering (SAXS) method.

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.85-96
• /
• 2020

It is important to extract salient object image and to solve the invariance problem for image recognition. In this paper we propose a new hybrid algorithm for invariance and improved classification performance in image recognition, whose algorithm is combined by FT(Frequency-tuned Salient Region Detection) algorithm, Guided filter, Zernike moments, and a simple artificial neural network (Multi-layer Perceptron). The conventional FT algorithm is used to extract initial salient object image, the guided filtering to preserve edge details, Zernike moments to solve invariance problem, and a classification to recognize the extracted image. For guided filtering, guided filter is used, and Multi-layer Perceptron which is a simple artificial neural networks is introduced for classification. Experimental results show that this algorithm can achieve a superior performance in the process of extracting salient object image and invariant moment feature. And the results show that the algorithm can also classifies the extracted object image with improved recognition rate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.50.6-50
• /
• 2001

This paper deals with a design of nonlinear glide slope capture logic using dynamic model inversion in singular perturbation, which is applicable to the autolanding in ILS. Aircraft dynamics are separated into the fast time-scale variables, related with the inner-loop design, and the slow time-scale variables, related with the outer-loop design. It is assumed that the aircraft starts landing at 1000ft of altitude, -2.5deg of flight path angle, and 250ft/sec of velocity. In the outer-loop design, commands of altitude and velocity are selected and thereby the pseudo-controls of power level and pitch rate are determined. Also the elevator input to the aircraft is determined in the inner-loop design. The final design is evaluated in 6 DOF simulation model of the associated aircraft, in which the actuator models are not included. The results show the satisfactory autolanding ...